pá 6. 8. 2021 v 12:14 odesílatel Michal Simek <michal.simek@xxxxxxxxxx> napsal: > > Add psgtr description for SATA and USB. > > Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx> > --- > > Based on https://lore.kernel.org/r/cover.1628244703.git.michal.simek@xxxxxxxxxx > --- > .../dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 26 +++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts > index 4394ec3b6a23..381cc682cef9 100644 > --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts > @@ -11,6 +11,7 @@ > > #include "zynqmp.dtsi" > #include "zynqmp-clk-ccf.dtsi" > +#include <dt-bindings/phy/phy.h> > > / { > model = "ZynqMP zc1751-xm017-dc3 RevA"; > @@ -37,6 +38,18 @@ memory@0 { > device_type = "memory"; > reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; > }; > + > + clock_si5338_2: clk26 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <26000000>; > + }; > + > + clock_si5338_3: clk125 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + }; > }; > > &fpd_dma_chan1 { > @@ -116,6 +129,13 @@ &nand0 { > num-cs = <2>; > }; > > +&psgtr { > + status = "okay"; > + /* usb3, sata */ > + clocks = <&clock_si5338_2>, <&clock_si5338_3>; > + clock-names = "ref2", "ref3"; > +}; > + > &rtc { > status = "okay"; > }; > @@ -131,6 +151,8 @@ &sata { > ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; > ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; > ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; > + phy-names = "sata-phy"; > + phys = <&psgtr 2 PHY_TYPE_SATA 0 3>; > }; > > &sdhci1 { /* emmc with some settings */ > @@ -149,6 +171,8 @@ &uart1 { > > &usb0 { > status = "okay"; > + phy-names = "usb3-phy"; > + phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; > }; > > &dwc3_0 { > @@ -161,6 +185,8 @@ &dwc3_0 { > /* ULPI SMSC USB3320 */ > &usb1 { > status = "okay"; > + phy-names = "usb3-phy"; > + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; > }; > > &dwc3_1 { > -- > 2.32.0 > Applied. M -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
