pá 6. 8. 2021 v 12:05 odesílatel Michal Simek <michal.simek@xxxxxxxxxx> napsal:
>
> Add missing gpio and qspio for zc1275-revA board.
>
> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
> ---
>
> .../boot/dts/xilinx/zynqmp-zc1275-revA.dts | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
> index 66a90483b004..e971ba8c1418 100644
> --- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
> @@ -2,7 +2,7 @@
> /*
> * dts file for Xilinx ZynqMP ZC1275
> *
> - * (C) Copyright 2017 - 2019, Xilinx, Inc.
> + * (C) Copyright 2017 - 2021, Xilinx, Inc.
> *
> * Michal Simek <michal.simek@xxxxxxxxxx>
> * Siva Durga Prasad Paladugu <sivadur@xxxxxxxxxx>
> @@ -20,6 +20,7 @@ / {
> aliases {
> serial0 = &uart0;
> serial1 = &dcc;
> + spi0 = &qspi;
> };
>
> chosen {
> @@ -37,6 +38,21 @@ &dcc {
> status = "okay";
> };
>
> +&gpio {
> + status = "okay";
> +};
> +
> +&qspi {
> + status = "okay";
> + flash@0 {
> + compatible = "m25p80", "jedec,spi-nor";
> + reg = <0x0>;
> + spi-tx-bus-width = <1>;
> + spi-rx-bus-width = <4>;
> + spi-max-frequency = <108000000>;
> + };
> +};
> +
> &uart0 {
> status = "okay";
> };
> --
> 2.32.0
>
Applied.
M
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
