[PATCH v2 0/2] Add support for Intel Thunder Bay SPI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Nandhini Srikandan <nandhini.srikandan@xxxxxxxxx>

Hi,

This patch set enables support for Designware SPI on the Intel Thunder Bay SoC.

Patch 1: SPI DT bindings for Intel Thunder Bay SoC.
Patch 2: Adds support for Designware SPI on Intel Thunderbay SoC.

The driver is tested on Keem Bay and Thunder Bay evaluation board

Changes from v1:
1) Designware CR0 specific macros are named in a generic way.
2) SPI CAP macros are named in generic way rather than naming project specific.
3) SPI KEEM BAY specific macros are replaced by generic macros.
4) Resued the existing SPI deassert API instead of adding another reset

Thanks & Regards,
Nandhini

Nandhini Srikandan (2):
  dt-bindings: spi: Add bindings for Intel Thunder Bay SoC
  spi: dw: Add support for Intel Thunder Bay SPI

 .../bindings/spi/snps,dw-apb-ssi.yaml         |  2 ++
 drivers/spi/spi-dw-core.c                     |  7 +++++--
 drivers/spi/spi-dw-mmio.c                     | 20 ++++++++++++++++++-
 drivers/spi/spi-dw.h                          | 12 ++++++++---
 4 files changed, 35 insertions(+), 6 deletions(-)

-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux