From: Haibo Chen <haibo.chen@xxxxxxx>
Before commit 0e30f47232ab5 ("mtd: spi-nor: add support for DTR protocol"),
for all PP command, it only support 1-1-1 mode, no matter the tx setting
in dts. But after the upper commit, the logic change. It will choose
the best mode(fastest mode) which flash device and spi-nor host controller
both support.
qspi and fspi host controller do not support read 1-4-4 mode. so need to
set the tx to 1, let the common code finally select read 1-1-4 mode.
Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 2 +-
arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 2 ++
arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts | 2 +-
6 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 988f8ab679ad..40f5e7a3b064 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -91,7 +91,7 @@
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 4e2820d19244..a2b24d4d4e3e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -48,7 +48,7 @@
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
index 54eaf3d6055b..3b2d627a0342 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
@@ -101,7 +101,7 @@
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index aa78e0d8c72b..fc178eebf8aa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -74,7 +74,7 @@
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 49f9db971f3b..b83df77195ec 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -337,6 +337,8 @@
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index f593e4ff62e1..564746d5000d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -281,7 +281,7 @@
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
- spi-tx-bus-width = <4>;
+ spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
m25p,fast-read;
spi-max-frequency = <50000000>;
--
2.17.1
