This patch series add the driver support for the eSPI controller of Aspeed 5/6th generation SoCs. This controller is a slave device communicating with a master over Enhanced Serial Peripheral Interface (eSPI). It supports all of the 4 eSPI channels, namely peripheral, virtual wire, out-of-band, and flash, and operates at max frequency of 66MHz. v2: - remove irqchip implementation - merge per-channel drivers into single one to avoid the racing issue among eSPI handshake process and driver probing. Chia-Wei Wang (5): dt-bindings: aspeed: Add eSPI controller MAINTAINER: Add ASPEED eSPI driver entry clk: aspeed: Add eSPI reset bit soc: aspeed: Add eSPI driver ARM: dts: aspeed: Add eSPI node .../devicetree/bindings/soc/aspeed/espi.yaml | 158 +++++ MAINTAINERS | 9 + arch/arm/boot/dts/aspeed-g6.dtsi | 17 + drivers/soc/aspeed/Kconfig | 11 + drivers/soc/aspeed/Makefile | 1 + drivers/soc/aspeed/aspeed-espi-ctrl.c | 206 ++++++ drivers/soc/aspeed/aspeed-espi-ctrl.h | 304 +++++++++ drivers/soc/aspeed/aspeed-espi-flash.h | 380 +++++++++++ drivers/soc/aspeed/aspeed-espi-ioc.h | 153 +++++ drivers/soc/aspeed/aspeed-espi-oob.h | 611 ++++++++++++++++++ drivers/soc/aspeed/aspeed-espi-perif.h | 512 +++++++++++++++ drivers/soc/aspeed/aspeed-espi-vw.h | 142 ++++ include/dt-bindings/clock/ast2600-clock.h | 1 + 13 files changed, 2505 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/aspeed/espi.yaml create mode 100644 drivers/soc/aspeed/aspeed-espi-ctrl.c create mode 100644 drivers/soc/aspeed/aspeed-espi-ctrl.h create mode 100644 drivers/soc/aspeed/aspeed-espi-flash.h create mode 100644 drivers/soc/aspeed/aspeed-espi-ioc.h create mode 100644 drivers/soc/aspeed/aspeed-espi-oob.h create mode 100644 drivers/soc/aspeed/aspeed-espi-perif.h create mode 100644 drivers/soc/aspeed/aspeed-espi-vw.h -- 2.17.1
