On Thu, Aug 12, 2021 at 8:06 AM Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote: > > On Thu, Aug 12, 2021 at 12:19 AM Lucas Stankus > <lucas.p.stankus@xxxxxxxxx> wrote: > > > > ADXL313 is a small, thin, low power, 3-axis accelerometer with high > > resolution measurement up to +/-4g. It includes an integrated 32-level > > FIFO and has activity and inactivity sensing capabilities. > > Thanks for an update, my comments below. > After addressing them, feel free to add > Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> > Sorry for the late reply. I've addressed most of your comments for the v4, but the two I've commented below. > > Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf > > Signed-off-by: Lucas Stankus <lucas.p.stankus@xxxxxxxxx> > > Reviewed-by: Alexandru Ardelean <ardeleanalex@xxxxxxxxx> > > --- > > MAINTAINERS | 6 + > > drivers/iio/accel/Kconfig | 29 +++ > > drivers/iio/accel/Makefile | 3 + > > drivers/iio/accel/adxl313.h | 57 ++++++ > > drivers/iio/accel/adxl313_core.c | 331 +++++++++++++++++++++++++++++++ > > drivers/iio/accel/adxl313_i2c.c | 65 ++++++ > > drivers/iio/accel/adxl313_spi.c | 91 +++++++++ > > 7 files changed, 582 insertions(+) > > create mode 100644 drivers/iio/accel/adxl313.h > > create mode 100644 drivers/iio/accel/adxl313_core.c > > create mode 100644 drivers/iio/accel/adxl313_i2c.c > > create mode 100644 drivers/iio/accel/adxl313_spi.c > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index d0464b83b5b5..b2ada8ca1453 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -585,6 +585,12 @@ L: platform-driver-x86@xxxxxxxxxxxxxxx > > S: Maintained > > F: drivers/platform/x86/adv_swbutton.c > > > > +ADXL313 THREE-AXIS DIGITAL ACCELEROMETER DRIVER > > +M: Lucas Stankus <lucas.p.stankus@xxxxxxxxx> > > +S: Supported > > +F: Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml > > +F: drivers/iio/accel/adxl313* > > + > > ADXL34X THREE-AXIS DIGITAL ACCELEROMETER DRIVER (ADXL345/ADXL346) > > M: Michael Hennerich <michael.hennerich@xxxxxxxxxx> > > S: Supported > > diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig > > index 2f0c0d512ae7..fb8349a88cd3 100644 > > --- a/drivers/iio/accel/Kconfig > > +++ b/drivers/iio/accel/Kconfig > > @@ -30,6 +30,35 @@ config ADIS16209 > > To compile this driver as a module, say M here: the module will be > > called adis16209. > > > > +config ADXL313 > > + tristate > > + > > +config ADXL313_I2C > > + tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer I2C Driver" > > + depends on I2C > > + select ADXL313 > > + select REGMAP_I2C > > + help > > + Say Y here if you want to build i2c support for the Analog Devices > > + ADXL313 3-axis digital accelerometer. > > + > > + To compile this driver as a module, choose M here: the module > > + will be called adxl313_i2c and you will also get adxl313_core > > + for the core module. > > + > > +config ADXL313_SPI > > + tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer SPI Driver" > > + depends on SPI > > + select ADXL313 > > + select REGMAP_SPI > > + help > > + Say Y here if you want to build spi support for the Analog Devices > > + ADXL313 3-axis digital accelerometer. > > + > > + To compile this driver as a module, choose M here: the module > > + will be called adxl313_spi and you will also get adxl313_core > > + for the core module. > > + > > config ADXL345 > > tristate > > > > diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile > > index 89280e823bcd..fadc92816e24 100644 > > --- a/drivers/iio/accel/Makefile > > +++ b/drivers/iio/accel/Makefile > > @@ -6,6 +6,9 @@ > > # When adding new entries keep the list in alphabetical order > > obj-$(CONFIG_ADIS16201) += adis16201.o > > obj-$(CONFIG_ADIS16209) += adis16209.o > > +obj-$(CONFIG_ADXL313) += adxl313_core.o > > +obj-$(CONFIG_ADXL313_I2C) += adxl313_i2c.o > > +obj-$(CONFIG_ADXL313_SPI) += adxl313_spi.o > > obj-$(CONFIG_ADXL345) += adxl345_core.o > > obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o > > obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o > > diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h > > new file mode 100644 > > index 000000000000..c170b5236988 > > --- /dev/null > > +++ b/drivers/iio/accel/adxl313.h > > @@ -0,0 +1,57 @@ > > +/* SPDX-License-Identifier: GPL-2.0-only */ > > +/* > > + * ADXL313 3-Axis Digital Accelerometer > > + * > > + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@xxxxxxxxx> > > + */ > > + > > +#ifndef _ADXL313_H_ > > +#define _ADXL313_H_ > > + > > +/* ADXL313 register definitions */ > > +#define ADXL313_REG_DEVID0 0x00 > > +#define ADXL313_REG_DEVID1 0x01 > > +#define ADXL313_REG_PARTID 0x02 > > +#define ADXL313_REG_XID 0x04 > > +#define ADXL313_REG_SOFT_RESET 0x18 > > +#define ADXL313_REG_OFS_AXIS(index) (0x1E + (index)) > > +#define ADXL313_REG_THRESH_ACT 0x24 > > +#define ADXL313_REG_ACT_INACT_CTL 0x27 > > +#define ADXL313_REG_BW_RATE 0x2C > > +#define ADXL313_REG_POWER_CTL 0x2D > > +#define ADXL313_REG_INT_MAP 0x2F > > +#define ADXL313_REG_DATA_FORMAT 0x31 > > +#define ADXL313_REG_DATAX 0x32 > > +#define ADXL313_REG_DATAY 0x34 > > +#define ADXL313_REG_DATAZ 0x36 > > +#define ADXL313_REG_FIFO_CTL 0x38 > > +#define ADXL313_REG_FIFO_STATUS 0x39 > > + > > +#define ADXL313_DEVID0 0xAD > > +#define ADXL313_DEVID1 0x1D > > +#define ADXL313_PARTID 0xCB > > +#define ADXL313_SOFT_RESET 0x52 > > + > > +#define ADXL313_RATE_MSK GENMASK(3, 0) > > +#define ADXL313_RATE_BASE 6 > > + > > +#define ADXL313_POWER_CTL_MSK GENMASK(3, 2) > > +#define ADXL313_MEASUREMENT_MODE BIT(3) > > + > > +#define ADXL313_RANGE_MSK GENMASK(1, 0) > > +#define ADXL313_RANGE_4G 3 > > + > > +#define ADXL313_FULL_RES BIT(3) > > +#define ADXL313_SPI_3WIRE BIT(6) > > +#define ADXL313_I2C_DISABLE BIT(6) > > + > > +extern const struct regmap_access_table adxl313_readable_regs_table; > > + > > +extern const struct regmap_access_table adxl313_writable_regs_table; > > + > > +int adxl313_core_probe(struct device *dev, > > + struct regmap *regmap, > > + const char *name, > > > + int (*interface_specific_setup)(struct device *, > > + struct regmap *)); > > I think it's quite a long name for an internal function. At least > "specific" word may be dropped, but I will go even for "interface" > drop and explaining this parameter in the kernel doc of the probe() > function/ > > > +#endif /* _ADXL313_H_ */ > > diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c > > new file mode 100644 > > index 000000000000..8f3d4f5281c4 > > --- /dev/null > > +++ b/drivers/iio/accel/adxl313_core.c > > @@ -0,0 +1,331 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * ADXL313 3-Axis Digital Accelerometer > > + * > > + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@xxxxxxxxx> > > + * > > + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf > > + */ > > + > > +#include <linux/bitfield.h> > > +#include <linux/iio/iio.h> > > +#include <linux/module.h> > > +#include <linux/regmap.h> > > + > > +#include "adxl313.h" > > + > > +const struct regmap_range adxl313_readable_reg_range[] = { > > + regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_XID), > > + regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET), > > + regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)), > > + regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL), > > + regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS) > > + comma (the rule of thumb is to check all similar code pieces even if > you got a comment only once) > > > +}; > > + > > +const struct regmap_access_table adxl313_readable_regs_table = { > > + .yes_ranges = adxl313_readable_reg_range, > > + .n_yes_ranges = ARRAY_SIZE(adxl313_readable_reg_range) > > + Comma > > > +}; > > +EXPORT_SYMBOL_GPL(adxl313_readable_regs_table); > > + > > +const struct regmap_range adxl313_writable_reg_range[] = { > > + regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET), > > + regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)), > > + regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL), > > + regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_INT_MAP), > > + regmap_reg_range(ADXL313_REG_DATA_FORMAT, ADXL313_REG_DATA_FORMAT), > > + regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL) > > Ditto. > > > +}; > > + > > +const struct regmap_access_table adxl313_writable_regs_table = { > > + .yes_ranges = adxl313_writable_reg_range, > > + .n_yes_ranges = ARRAY_SIZE(adxl313_writable_reg_range) > > Ditto. > > > > +}; > > +EXPORT_SYMBOL_GPL(adxl313_writable_regs_table); > > + > > +struct adxl313_data { > > + struct regmap *regmap; > > + struct mutex lock; /* lock to protect transf_buf */ > > + __le16 transf_buf ____cacheline_aligned; > > +}; > > + > > +static const int adxl313_odr_freqs[][2] = { > > + [0] = { 6, 250000 }, > > + [1] = { 12, 500000 }, > > + [2] = { 25, 0 }, > > + [3] = { 50, 0 }, > > + [4] = { 100, 0 }, > > + [5] = { 200, 0 }, > > + [6] = { 400, 0 }, > > + [7] = { 800, 0 }, > > + [8] = { 1600, 0 }, > > + [9] = { 3200, 0 }, > > +}; > > + > > +#define ADXL313_ACCEL_CHANNEL(index, addr, axis) { \ > > + .type = IIO_ACCEL, \ > > + .address = addr, \ > > + .modified = 1, \ > > + .channel2 = IIO_MOD_##axis, \ > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > > + BIT(IIO_CHAN_INFO_CALIBBIAS), \ > > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ > > + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ > > + .info_mask_shared_by_type_available = \ > > + BIT(IIO_CHAN_INFO_SAMP_FREQ), \ > > + .scan_index = index, \ > > + .scan_type = { \ > > + .sign = 's', \ > > + .realbits = 13, \ > > + .storagebits = 16, \ > > + .endianness = IIO_LE, \ > > + }, \ > > +} > > + > > +static const struct iio_chan_spec adxl313_channels[] = { > > + ADXL313_ACCEL_CHANNEL(0, ADXL313_REG_DATAX, X), > > + ADXL313_ACCEL_CHANNEL(1, ADXL313_REG_DATAY, Y), > > + ADXL313_ACCEL_CHANNEL(2, ADXL313_REG_DATAZ, Z), > > +}; > > + > > +static int adxl313_set_odr(struct adxl313_data *data, > > + unsigned int freq1, unsigned int freq2) > > +{ > > + unsigned int i; > > + > > + for (i = 0; i < ARRAY_SIZE(adxl313_odr_freqs); i++) { > > + if (adxl313_odr_freqs[i][0] == freq1 && > > + adxl313_odr_freqs[i][1] == freq2) > > + break; > > + } > > + > > + if (i == ARRAY_SIZE(adxl313_odr_freqs)) > > + return -EINVAL; > > + > > + return regmap_update_bits(data->regmap, ADXL313_REG_BW_RATE, > > + ADXL313_RATE_MSK, > > > + FIELD_PREP(ADXL313_RATE_MSK, > > + ADXL313_RATE_BASE + i)); > > One line? > Line to long, 87 chars =/ > > +} > > + > > +static int adxl313_read_axis(struct adxl313_data *data, > > + struct iio_chan_spec const *chan) > > +{ > > + int ret; > > + > > + mutex_lock(&data->lock); > > + > > + ret = regmap_bulk_read(data->regmap, > > + chan->address, > > + &data->transf_buf, 2); > > + if (ret) > > + goto unlock_ret; > > + > > + ret = le16_to_cpu(data->transf_buf); > > + > > +unlock_ret: > > + mutex_unlock(&data->lock); > > + return ret; > > +} > > + > > +static int adxl313_read_freq_avail(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + const int **vals, int *type, int *length, > > + long mask) > > +{ > > + switch (mask) { > > + case IIO_CHAN_INFO_SAMP_FREQ: > > + *vals = (const int *)adxl313_odr_freqs; > > + *length = ARRAY_SIZE(adxl313_odr_freqs) * 2; > > + *type = IIO_VAL_INT_PLUS_MICRO; > > + return IIO_AVAIL_LIST; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int adxl313_read_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int *val, int *val2, long mask) > > +{ > > + struct adxl313_data *data = iio_priv(indio_dev); > > + unsigned int regval; > > + int ret; > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_RAW: > > + ret = adxl313_read_axis(data, chan); > > + if (ret < 0) > > + return ret; > > + > > + *val = sign_extend32(ret, chan->scan_type.realbits - 1); > > + return IIO_VAL_INT; > > + case IIO_CHAN_INFO_SCALE: > > + /* > > + * Scale for any g range is given in datasheet as > > + * 1024 LSB/g = 0.0009765625 * 9.80665 = 0.009576806640625 m/s^2 > > + */ > > + *val = 0; > > + *val2 = 9576806; > > + return IIO_VAL_INT_PLUS_NANO; > > + case IIO_CHAN_INFO_CALIBBIAS: > > + ret = regmap_read(data->regmap, > > + ADXL313_REG_OFS_AXIS(chan->scan_index), > > + ®val); > > + if (ret) > > + return ret; > > + > > + /* > > + * 8-bit resolution at +/- 0.5g, that is 4x accel data scale > > + * factor at full resolution > > + */ > > + *val = sign_extend32(regval, 7) * 4; > > + return IIO_VAL_INT; > > + case IIO_CHAN_INFO_SAMP_FREQ: > > + ret = regmap_read(data->regmap, ADXL313_REG_BW_RATE, ®val); > > + if (ret) > > + return ret; > > + > > + ret = FIELD_GET(ADXL313_RATE_MSK, regval) - ADXL313_RATE_BASE; > > + *val = adxl313_odr_freqs[ret][0]; > > + *val2 = adxl313_odr_freqs[ret][1]; > > + return IIO_VAL_INT_PLUS_MICRO; > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static int adxl313_write_raw(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int val, int val2, long mask) > > +{ > > + struct adxl313_data *data = iio_priv(indio_dev); > > + > > + switch (mask) { > > + case IIO_CHAN_INFO_CALIBBIAS: > > + /* > > + * 8-bit resolution at +/- 0.5g, that is 4x accel data scale > > + * factor at full resolution > > + */ > > + if (clamp_val(val, -128 * 4, 127 * 4) != val) > > + return -EINVAL; > > + > > + return regmap_write(data->regmap, > > + ADXL313_REG_OFS_AXIS(chan->scan_index), > > + val / 4); > > + case IIO_CHAN_INFO_SAMP_FREQ: > > + return adxl313_set_odr(data, val, val2); > > + default: > > + return -EINVAL; > > + } > > +} > > + > > +static const struct iio_info adxl313_info = { > > + .read_raw = adxl313_read_raw, > > + .write_raw = adxl313_write_raw, > > + .read_avail = adxl313_read_freq_avail > > + Comma > > > +}; > > + > > +static int adxl313_setup(struct device *dev, struct adxl313_data *data, > > + int (*interface_specific_setup)(struct device *, > > + struct regmap *)) > > Same comment against nameing, "setup" would be enough here. > > > +{ > > + unsigned int regval; > > + int ret; > > + > > + /* Ensures the device is in a consistent state after start up */ > > + ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET, > > + ADXL313_SOFT_RESET); > > + if (ret) > > + return ret; > > + > > + if (interface_specific_setup) { > > + ret = interface_specific_setup(dev, data->regmap); > > + if (ret) > > + return ret; > > + } > > + > > + ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, ®val); > > + if (ret) > > + return ret; > > + > > + if (regval != ADXL313_DEVID0) { > > + dev_err(dev, "Invalid manufacturer ID: 0x%02x\n", regval); > > + return -ENODEV; > > + } > > + > > + ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, ®val); > > + if (ret) > > + return ret; > > + > > + if (regval != ADXL313_DEVID1) { > > + dev_err(dev, "Invalid mems ID: 0x%02x\n", regval); > > + return -ENODEV; > > + } > > + > > + ret = regmap_read(data->regmap, ADXL313_REG_PARTID, ®val); > > + if (ret) > > + return ret; > > + > > + if (regval != ADXL313_PARTID) { > > + dev_err(dev, "Invalid device ID: 0x%02x\n", regval); > > + return -ENODEV; > > + } > > + > > + /* Sets the range to +/- 4g */ > > + ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT, > > + ADXL313_RANGE_MSK, > > + FIELD_PREP(ADXL313_RANGE_MSK, > > + ADXL313_RANGE_4G)); > > + if (ret) > > + return ret; > > + > > + /* Enables full resolution */ > > + ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT, > > + ADXL313_FULL_RES, ADXL313_FULL_RES); > > + if (ret) > > + return ret; > > + > > + /* Enables measurement mode */ > > + return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL, > > + ADXL313_POWER_CTL_MSK, > > + ADXL313_MEASUREMENT_MODE); > > +} > > Provide a kernel doc for the probe() > Is there some driver that did something similar that I can take inspiration from? I'm not sure where I should add this doc and how I should format it, so a north would be appreciated :) > > +int adxl313_core_probe(struct device *dev, > > + struct regmap *regmap, > > + const char *name, > > + int (*interface_specific_setup)(struct device *, > > + struct regmap *)) > > Ditto for the "setup" name. > > > +{ > > + struct adxl313_data *data; > > + struct iio_dev *indio_dev; > > + int ret; > > + > > + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); > > + if (!indio_dev) > > + return -ENOMEM; > > + > > + data = iio_priv(indio_dev); > > + data->regmap = regmap; > > + mutex_init(&data->lock); > > + > > + indio_dev->name = name; > > + indio_dev->info = &adxl313_info; > > + indio_dev->modes = INDIO_DIRECT_MODE; > > + indio_dev->channels = adxl313_channels; > > + indio_dev->num_channels = ARRAY_SIZE(adxl313_channels); > > + > > + ret = adxl313_setup(dev, data, interface_specific_setup); > > + if (ret) { > > + dev_err(dev, "ADXL313 setup failed\n"); > > + return ret; > > + } > > + > > + return devm_iio_device_register(dev, indio_dev); > > +} > > +EXPORT_SYMBOL_GPL(adxl313_core_probe); > > + > > +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@xxxxxxxxx>"); > > +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer core driver"); > > +MODULE_LICENSE("GPL v2"); > > diff --git a/drivers/iio/accel/adxl313_i2c.c b/drivers/iio/accel/adxl313_i2c.c > > new file mode 100644 > > index 000000000000..517c6f1c43ad > > --- /dev/null > > +++ b/drivers/iio/accel/adxl313_i2c.c > > @@ -0,0 +1,65 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * ADXL313 3-Axis Digital Accelerometer > > + * > > + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@xxxxxxxxx> > > + * > > + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf > > + */ > > + > > +#include <linux/i2c.h> > > +#include <linux/module.h> > > +#include <linux/regmap.h> > > + > > +#include "adxl313.h" > > + > > +static const struct regmap_config adxl313_i2c_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > + .rd_table = &adxl313_readable_regs_table, > > + .wr_table = &adxl313_writable_regs_table, > > + .max_register = 0x39, > > +}; > > + > > +static int adxl313_i2c_probe(struct i2c_client *client) > > +{ > > + struct regmap *regmap; > > + > > + regmap = devm_regmap_init_i2c(client, &adxl313_i2c_regmap_config); > > + if (IS_ERR(regmap)) { > > + dev_err(&client->dev, "Error initializing i2c regmap: %ld\n", > > + PTR_ERR(regmap)); > > + return PTR_ERR(regmap); > > + } > > + > > + return adxl313_core_probe(&client->dev, regmap, client->name, NULL); > > +} > > + > > +static const struct i2c_device_id adxl313_i2c_id[] = { > > + { "adxl313" }, > > + { } > > +}; > > + > > +MODULE_DEVICE_TABLE(i2c, adxl313_i2c_id); > > + > > +static const struct of_device_id adxl313_of_match[] = { > > + { .compatible = "adi,adxl313" }, > > + { } > > +}; > > + > > +MODULE_DEVICE_TABLE(of, adxl313_of_match); > > + > > +static struct i2c_driver adxl313_i2c_driver = { > > + .driver = { > > + .name = "adxl313_i2c", > > + .of_match_table = adxl313_of_match, > > + }, > > + .probe_new = adxl313_i2c_probe, > > + .id_table = adxl313_i2c_id > > + Comma > > > +}; > > + > > +module_i2c_driver(adxl313_i2c_driver); > > + > > +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@xxxxxxxxx>"); > > +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer I2C driver"); > > +MODULE_LICENSE("GPL v2"); > > diff --git a/drivers/iio/accel/adxl313_spi.c b/drivers/iio/accel/adxl313_spi.c > > new file mode 100644 > > index 000000000000..4d625b1753a5 > > --- /dev/null > > +++ b/drivers/iio/accel/adxl313_spi.c > > @@ -0,0 +1,91 @@ > > +// SPDX-License-Identifier: GPL-2.0-only > > +/* > > + * ADXL313 3-Axis Digital Accelerometer > > + * > > + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@xxxxxxxxx> > > + * > > + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf > > + */ > > + > > +#include <linux/module.h> > > +#include <linux/regmap.h> > > +#include <linux/spi/spi.h> > > + > > +#include "adxl313.h" > > + > > +static const struct regmap_config adxl313_spi_regmap_config = { > > + .reg_bits = 8, > > + .val_bits = 8, > > + .rd_table = &adxl313_readable_regs_table, > > + .wr_table = &adxl313_writable_regs_table, > > + .max_register = 0x39, > > + /* Setting bits 7 and 6 enables multiple-byte read */ > > + .read_flag_mask = BIT(7) | BIT(6), > > +}; > > + > > +static int adxl313_spi_setup(struct device *dev, struct regmap *regmap) > > +{ > > + struct spi_device *spi = container_of(dev, struct spi_device, dev); > > + int ret; > > + > > + if (spi->mode & SPI_3WIRE) { > > + ret = regmap_write(regmap, ADXL313_REG_DATA_FORMAT, > > + ADXL313_SPI_3WIRE); > > + if (ret) > > + return ret; > > + } > > + > > + return regmap_update_bits(regmap, ADXL313_REG_POWER_CTL, > > + ADXL313_I2C_DISABLE, ADXL313_I2C_DISABLE); > > +} > > + > > +static int adxl313_spi_probe(struct spi_device *spi) > > +{ > > + const struct spi_device_id *id = spi_get_device_id(spi); > > + struct regmap *regmap; > > + int ret; > > + > > + spi->mode |= SPI_MODE_3; > > + ret = spi_setup(spi); > > + if (ret) > > + return ret; > > + > > + regmap = devm_regmap_init_spi(spi, &adxl313_spi_regmap_config); > > + if (IS_ERR(regmap)) { > > + dev_err(&spi->dev, "Error initializing spi regmap: %ld\n", > > + PTR_ERR(regmap)); > > + return PTR_ERR(regmap); > > + } > > + > > + return adxl313_core_probe(&spi->dev, regmap, id->name, > > + &adxl313_spi_setup); > > +} > > + > > +static const struct spi_device_id adxl313_spi_id[] = { > > + { "adxl313" }, > > + { } > > +}; > > + > > +MODULE_DEVICE_TABLE(spi, adxl313_spi_id); > > + > > +static const struct of_device_id adxl313_of_match[] = { > > + { .compatible = "adi,adxl313" }, > > + { } > > +}; > > + > > +MODULE_DEVICE_TABLE(of, adxl313_of_match); > > + > > +static struct spi_driver adxl313_spi_driver = { > > + .driver = { > > + .name = "adxl313_spi", > > + .of_match_table = adxl313_of_match, > > + }, > > + .probe = adxl313_spi_probe, > > + .id_table = adxl313_spi_id > > + Comma > > > +}; > > + > > +module_spi_driver(adxl313_spi_driver); > > + > > +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@xxxxxxxxx>"); > > +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer SPI driver"); > > +MODULE_LICENSE("GPL v2"); > > -- > > 2.32.0 > > > > > -- > With Best Regards, > Andy Shevchenko