Re: [PATCH v3 7/7] arm64: dts: exynos: Add Exynos850 SoC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 11, 2021 at 02:48:27PM +0300, Sam Protsenko wrote:
> Samsung Exynos850 is ARMv8-based mobile-oriented SoC.
> 
> This patch adds minimal SoC support by including next Device Tree nodes:
> 
> 1. Octa cores (Cortex-A55), supporting PSCI v1.0
> 2. ARM architecture timer (armv8-timer)
> 3. Interrupt controller (GIC-400)
> 4. Pinctrl nodes for GPIO
> 5. Serial node
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> ---
> Changes in v3:
>  - Used generic fixed clock for serial
> 
> Changes in v2:
>  * Commit message:
>    - Documented added dts features instead of CPU features
> 
>  * exynos850-usi.dtsi:
>    - Removed, moved everything to exynos850.dtsi
> 
>  * exynos850.dtsi:
>    - Root node:
>      - Added comment about engineering name (Exynos3830)
>      - Renamed pinctrl nodes, adding domain names
>      - Used hard coded IRQ numbers instead of named constants everywhere
>      - Added soc node, moved next nodes there: gic, clock, pinctrls and
>        serial
>      - Used address-cells=1 for soc node and removed unneeded 0x0 from
>        reg properties
>      - Moved exynos850-pinctrl.dtsi include line to the end of
>        exynos850.dtsi
>      - Coding style fixes
>    - cpus:
>      - Used address-cells=1 for cpus node
>      - Renamed cpu@0001 to cpu@1, and so on
>      - Left only "arm,cortex-a55" for cpus compatible
>      - Renamed reg = <0x0001> to <0x1> for cpus
>    - armv8 timer:
>      - Add comment about missing HV timer IRQ to armv8 timer node
>      - Removed not existing properties from armv8 timer node
>      - Fixed cpu number in CPU_MASK()
>      - Removed obsolete clock-frequency property
>    - GIC:
>      - Fixed GIC type to be GIC-400
>      - Fixed size of GIC's 2nd region to be 0x2000
>    - serial node:
>      - Hard coded clock number for serial_0 for now; will replace with
>        named const once proper clock driver is implemented
>      - Removed gate_uart_clk0 clock from serial_0, as that clock is not
>        supported in serial driver anyway (yet)
>    - clock node:
>      - Fixed clock controller node name (@0x12.. -> @12..)
> 
>  * exynos850-pinctrl.dtsi:
>    - Referenced pinctrl nodes instead of defining those again in root node
>    - Fixed interrupt-cells (3 -> 2)
>    - Fixed USI related comments for pin config nodes
>    - Removed decon_f_te_* and fm_lna_en nodes (won't be used)
>    - Reordered pin config nodes by pin numbers
>    - Improved all comments
>    - Used existing named constants for pin-function and pin-pud
>    - Fixed node names (used hyphens instead of underscore)
>    - Fixed warnings found in W=1 build
> 
>  .../boot/dts/exynos/exynos850-pinctrl.dtsi    | 748 ++++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynos850.dtsi     | 261 ++++++
>  2 files changed, 1009 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> new file mode 100644
> index 000000000000..ba5d5f33e2f6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> @@ -0,0 +1,748 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Samsung's Exynos850 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (C) 2017 Samsung Electronics Co., Ltd.
> + * Copyright (C) 2021 Linaro Ltd.
> + *
> + * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device
> + * tree nodes in this file.
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/samsung.h>
> +
> +&pinctrl_alive {
> +	gpa0: gpa0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	gpa1: gpa1 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	gpa2: gpa2 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	gpa3: gpa3 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	gpa4: gpa4 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	gpq0: gpq0 {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	/* I2C5 (also called CAM_PMIC_I2C in TRM) */
> +	i2c5_bus: i2c5-bus {

Please name all the pinctrl nodes with some pattern you can match on 
once there is a schema. '-pins$' is my suggestion.

> +		samsung,pins = "gpa3-5", "gpa3-6";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};
> +
> +	/* I2C6 (also called MOTOR_I2C in TRM) */
> +	i2c6_bus: i2c6-bus {
> +		samsung,pins = "gpa3-7", "gpa4-0";
> +		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
> +		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
> +		samsung,pin-drv = <0>;
> +	};



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux