Add IMEM, pil info and download mode DT nodes for SC7180 SoC which
will help in the post-mortem debug.
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 47b20ba69057..f2957db166e9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3222,6 +3222,27 @@ spmi_bus: spmi@c440000 {
cell-index = <0>;
};
+ imem@146aa000 {
+ compatible = "simple-mfd";
+ reg = <0 0x146aa000 0 0x2000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0x146aa000 0x2000>;
+
+ pil-reloc@94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x94c 0xc8>;
+ };
+
+ dload-mode@1c00 {
+ compatible = "qcom,dload-mode";
+ reg = <0x1c00 0x1000>;
+ qcom,sdi-disable-regs = <&tcsr_regs 0x3a000 0x4>;
+ };
+ };
+
apps_smmu: iommu@15000000 {
compatible = "qcom,sc7180-smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x100000>;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
