On Fri, Aug 06, 2021 at 03:19:03PM +0930, Joel Stanley wrote: > LiteETH is a small footprint and configurable Ethernet core for FPGA > based system on chips. > > Signed-off-by: Joel Stanley <joel@xxxxxxxxx> > --- > .../bindings/net/litex,liteeth.yaml | 62 +++++++++++++++++++ > 1 file changed, 62 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/litex,liteeth.yaml > > diff --git a/Documentation/devicetree/bindings/net/litex,liteeth.yaml b/Documentation/devicetree/bindings/net/litex,liteeth.yaml > new file mode 100644 > index 000000000000..e2a837dbfdaa > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/litex,liteeth.yaml > @@ -0,0 +1,62 @@ > +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/litex,liteeth.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: LiteX LiteETH ethernet device > + > +maintainers: > + - Joel Stanley <joel@xxxxxxxxx> > + > +description: | > + LiteETH is a small footprint and configurable Ethernet core for FPGA based > + system on chips. > + > + The hardware source is Open Source and can be found on at > + https://github.com/enjoy-digital/liteeth/. > + > +properties: > + compatible: > + const: litex,liteeth > + > + reg: > + minItems: 3 > + items: > + - description: MAC registers > + - description: MDIO registers > + - description: Packet buffer Hi Joel How configurable is the synthesis? Can the MDIO bus be left out? You can have only the MDIO bus and no MAC? I've not looked at the driver yet, but if the MDIO bus has its own address space, you could consider making it a standalone device. Somebody including two or more LiteETH blocks could then have one shared MDIO bus. That is a supported Linux architecture. > + > + interrupts: > + maxItems: 1 > + > + rx-fifo-depth: > + description: Receive FIFO size, in units of 2048 bytes > + > + tx-fifo-depth: > + description: Transmit FIFO size, in units of 2048 bytes > + > + mac-address: > + description: MAC address to use > + > +required: > + - compatible > + - reg > + - interrupts > + > +additionalProperties: false > + > +examples: > + - | > + mac: ethernet@8020000 { > + compatible = "litex,liteeth"; > + reg = <0x8021000 0x100 > + 0x8020800 0x100 > + 0x8030000 0x2000>; > + rx-fifo-depth = <2>; > + tx-fifo-depth = <2>; > + interrupts = <0x11 0x1>; > + }; You would normally expect to see some MDIO properties here, a link to the standard MDIO yaml, etc. Andrew
