Re: [PATCH 12/12] arm64: dts: exynos: Add Exynos850 SoC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 31 Jul 2021 at 12:03, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxxxxx> wrote:
>
> On 30/07/2021 16:49, Sam Protsenko wrote:
> > Samsung Exynos850 is ARMv8-based mobile-oriented SoC.
> >
> > Features:
> >  * CPU: Cortex-A55 Octa (8 cores), up to 2 GHz
> >  * Memory interface: LPDDR4/4x 2 channels (12.8 GB/s)
> >  * SD/MMC: SD 3.0, eMMC5.1 DDR 8-bit
> >  * Modem: 4G LTE, 3G, GSM/GPRS/EDGE
> >  * RF: Quad GNSS, WiFi 5 (802.11ac), Bluetooth 5.0
> >  * GPU: Mali-G52 MP1
> >  * Codec: 1080p 60fps H64, HEVC, JPEG HW Codec
> >  * Display: Full HD+ (2520x1080)@60fps LCD
> >  * Camera: 16+5MP/13+8MP ISP, MIPI CSI 4/4/2, FD, DRC
> >  * Connectivity: USB 2.0 DRD, USI (SPI/UART/I2C), HSI2C, I3C, ADC, Audio
>
> Please document first the features you add (and are working) and
> afterwards mention all others capabilities.
>

I'll remove SoC features, as it's easy to find and it's not needed in
commit message anyway. Instead I'll describe which features (nodes)
are added in DT by this commit.

> >
> > This patch adds minimal SoC support. Particular board device tree files
> > can include exynos850.dtsi file to get SoC related nodes, and then
> > reference those nodes further as needed.
> >
> > Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> > ---
> >  .../boot/dts/exynos/exynos850-pinctrl.dtsi    | 782 ++++++++++++++++++
> >  arch/arm64/boot/dts/exynos/exynos850-usi.dtsi |  30 +
> >  arch/arm64/boot/dts/exynos/exynos850.dtsi     | 245 ++++++
>
> Not buildable. Missing Makefile, missing DTS. Please submit with initial
> DTS, otherwise no one is able to verify it even compiles.
>

This device is not available for purchase yet. I'll send the patch for
board dts once it's announced. I can do all the testing for now, if
you have any specific requests. Would it be possible for us to review
and apply only SoC support for now? Will send v2 soon...

> >  3 files changed, 1057 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> >  create mode 100644 arch/arm64/boot/dts/exynos/exynos850-usi.dtsi
> >  create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> > new file mode 100644
> > index 000000000000..4cf0a22cc6db
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
> > @@ -0,0 +1,782 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Samsung's Exynos850 SoC pin-mux and pin-config device tree source
> > + *
> > + * Copyright (C) 2017 Samsung Electronics Co., Ltd.
> > + * Copyright (C) 2021 Linaro Ltd.
> > + *
> > + * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device
> > + * tree nodes in this file.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/exynos850.h>
> > +
> > +/ {
> > +     /* ALIVE */
> > +     pinctrl@11850000 {
> > +             gpa0: gpa0 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
>
> That's odd a little, why three cells? How this would be used/referenced?
>

Fixed. You are right, irq_domain_xlate_twocell() is used in
pinctrl-exynos.c. Btw, that fixed the use-case when gpX is specified
as interrupt-parrent for other nodes.

> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                         <GIC_SPI INTREQ__ALIVE_EINT0 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT1 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT2 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT3 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT4 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT5 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT6 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT7 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             gpa1: gpa1 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                         <GIC_SPI INTREQ__ALIVE_EINT8 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT9 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT10 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT11 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT12 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT13 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT14 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT15 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             gpa2: gpa2 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                         <GIC_SPI INTREQ__ALIVE_EINT16 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT17 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT18 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT19 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT20 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT21 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT22 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT23 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             gpa3: gpa3 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                         <GIC_SPI INTREQ__ALIVE_EINT24 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT25 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT26 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT27 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT28 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT29 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT30 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT31 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             gpa4: gpa4 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                         <GIC_SPI INTREQ__ALIVE_EINT32 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT33 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT34 IRQ_TYPE_LEVEL_HIGH>,
> > +                         <GIC_SPI INTREQ__ALIVE_EINT35 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             gpq0: gpq0 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             /* USI_PERI_UART_DBG */
> > +             uart0_bus: uart0-bus {
> > +                     samsung,pins = "gpq0-0", "gpq0-1";
> > +                     samsung,pin-function = <2>;
>
> EXYNOS_PIN_FUNC_2
>

Done, thanks.

> > +                     samsung,pin-pud = <0>;
>
> EXYNOS_PIN_PULL_xx?
>

Yes, replaced pin-pud values with these constants, thanks. Won't touch
pin-drv properties, though, as different domains have different
meanings for the same values, so don't want to introduce the whole
bunch of consts.

> > +             };
> > +
> > +             decon_f_te_on: decon_f_te_on {
>
> 1. Where is it used?
> 2. Use hyphens in node names.
> Please build it with W=1 and fix the warnings.
>

decon* nodes seem like leftover from vendor kernel. Those are not
connected anywhere on my board, so I removed those nodes.

Also fixed node names as you suggested, and fixed all stuff found with
W=1 build, thanks for reminding me that.

> > +                     samsung,pins = "gpa4-1";
>
> Order the nodes based on first pin name, so:
> i2c5_bus
> i2c6_bus
> decon_f_te_on
> uart0_bus
>

Done. Also rearranged the nodes in that way for other pinctrl domains.

> > +                     samsung,pin-function = <0xf>;
> > +             };
> > +
> > +             decon_f_te_off: decon_f_te_off {
>
> Where is it used?
>

Removed, as explained above.

> > +                     samsung,pins = "gpa4-1";
> > +                     samsung,pin-function = <0x0>;
> > +             };
> > +
> > +             /* I2C_5 | CAM_PMIC_I2C */
>
> This comment is confusing. I2C-5 is obvious from node name and label.
> CAM_PMIC_I2C does not look like property of SoC but board.
>

Yeah, unfortunately this confusing I2C naming (CAM_PMIC_I2C and
MOTOR_I2C) actually comes from TRM and SoC schematic symbol. So in
Device Tree it's called just i2c5 and i2c6 (because it's a regular I2C
really), but in TRM it's a mix of both names. I guess it's just a poor
pin function naming, done by SoC designers.

That said, I suggest changing these comments to something like this:

    /* I2C5 (also called CAM_PMIC_I2C in TRM) */
    /* I2C6 (also called MOTOR_I2C in TRM) */

> > +             i2c5_bus: i2c5-bus {
> > +                     samsung,pins = "gpa3-5", "gpa3-6";
> > +                     samsung,pin-function = <3>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             /* I2C_6 | MOTOR_I2C */
> > +             i2c6_bus: i2c6-bus {
> > +                     samsung,pins = "gpa3-7", "gpa4-0";
> > +                     samsung,pin-function = <3>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +     };
> > +
> > +     /* CMGP */
> > +     pinctrl@11c30000 {
> > +             gpm0: gpm0 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                       <GIC_SPI INTREQ__CMGP_EXT_INTM00 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             gpm1: gpm1 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                       <GIC_SPI INTREQ__CMGP_EXT_INTM01 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             gpm2: gpm2 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                       <GIC_SPI INTREQ__CMGP_EXT_INTM02 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             gpm3: gpm3 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                       <GIC_SPI INTREQ__CMGP_EXT_INTM03 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             gpm4: gpm4 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                       <GIC_SPI INTREQ__CMGP_EXT_INTM04 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             gpm5: gpm5 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <3>;
> > +                     interrupt-parent = <&gic>;
> > +                     interrupts =
> > +                       <GIC_SPI INTREQ__CMGP_EXT_INTM05 IRQ_TYPE_LEVEL_HIGH>;
> > +             };
> > +
> > +             /* usi_cmgp00 */
> > +             hsi2c3_bus: hsi2c3-bus {
> > +                     samsung,pins = "gpm0-0", "gpm1-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             /* usi_cmgp01 */
> > +             hsi2c4_bus: hsi2c4-bus {
> > +                     samsung,pins = "gpm4-0", "gpm5-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             /* spi usi_cmgp00 */
> > +             spi1_bus: spi1-bus {
> > +                     samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             spi1_cs: spi1-cs {
> > +                     samsung,pins = "gpm3-0";
> > +                     samsung,pin-function = <1>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             spi1_cs_func: spi1-cs-func {
> > +                     samsung,pins = "gpm3-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             /* spi usi_cmgp01 */
> > +             spi2_bus: spi2-bus {
> > +                     samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             spi2_cs: spi2-cs {
> > +                     samsung,pins = "gpm7-0";
> > +                     samsung,pin-function = <1>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             spi2_cs_func: spi2-cs-func {
> > +                     samsung,pins = "gpm7-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             /* usi_cmgp00_uart */
> > +             uart1_bus_single: uart1-bus {
> > +                     samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +             };
> > +
> > +             uart1_bus_dual: uart1-bus-dual {
> > +                     samsung,pins = "gpm0-0", "gpm1-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +             };
> > +
> > +             /* usi_cmgp01_uart */
> > +             uart2_bus_single: uart2-bus {
> > +                     samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +             };
> > +
> > +             uart2_bus_dual: uart2-bus-dual {
> > +                     samsung,pins = "gpm4-0", "gpm5-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +             };
> > +     };
> > +
> > +     /* AUD */
> > +     pinctrl@14a60000 {
> > +             gpb0: gpb0 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             gpb1: gpb1 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             aud_codec_mclk: aud-codec-mclk {
> > +                     samsung,pins = "gpb0-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <1>;
> > +             };
> > +
> > +             aud_codec_mclk_idle: aud-codec-mclk-idle {
> > +                     samsung,pins = "gpb0-0";
> > +                     samsung,pin-function = <0>;
> > +                     samsung,pin-pud = <1>;
> > +             };
> > +
> > +             aud_i2s0_bus: aud-i2s0-bus {
> > +                     samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <1>;
> > +             };
> > +
> > +             aud_i2s0_idle: aud-i2s0-idle {
> > +                     samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
> > +                     samsung,pin-function = <0>;
> > +                     samsung,pin-pud = <1>;
> > +             };
> > +
> > +             aud_i2s1_bus: aud-i2s1-bus {
> > +                     samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <1>;
> > +             };
> > +
> > +             aud_i2s1_idle: aud-i2s1-idle {
> > +                     samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
> > +                     samsung,pin-function = <0>;
> > +                     samsung,pin-pud = <1>;
> > +             };
> > +
> > +             aud_fm_bus: aud-fm-bus {
> > +                     samsung,pins = "gpb1-4";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <1>;
> > +             };
> > +
> > +             aud_fm_idle: aud-fm-idle {
> > +                     samsung,pins = "gpb1-4";
> > +                     samsung,pin-function = <0>;
> > +                     samsung,pin-pud = <1>;
> > +             };
> > +     };
> > +
> > +     /* HSI */
> > +     pinctrl@13430000 {
> > +             gpf2: gpf2 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             sd2_clk: sd2-clk {
> > +                     samsung,pins = "gpf2-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sd2_cmd: sd2-cmd {
> > +                     samsung,pins = "gpf2-1";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <2>;
> > +              };
> > +
> > +             sd2_bus1: sd2-bus-width1 {
> > +                     samsung,pins = "gpf2-2";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sd2_bus4: sd2-bus-width4 {
> > +                     samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sd2_clk_fast_slew_rate_1x: sd2-clk_fast_slew_rate_1x {
> > +                     samsung,pins = "gpf2-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             sd2_clk_fast_slew_rate_1_5x: sd2-clk_fast_slew_rate_1_5x {
> > +                     samsung,pins = "gpf2-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <1>;
> > +             };
> > +
> > +             sd2_clk_fast_slew_rate_2x: sd2-clk_fast_slew_rate_2x {
> > +                     samsung,pins = "gpf2-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sd2_clk_fast_slew_rate_2_5x: sd2-clk_fast_slew_rate_2_5x {
> > +                     samsung,pins = "gpf2-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <3>;
> > +             };
> > +
> > +             sd2_clk_fast_slew_rate_3x: sd2-clk_fast_slew_rate_3x {
> > +                     samsung,pins = "gpf2-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <4>;
> > +             };
> > +
> > +             sd2_clk_fast_slew_rate_4x: sd2-clk_fast_slew_rate_4x {
> > +                     samsung,pins = "gpf2-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <5>;
> > +             };
> > +
> > +             sd2_pins_as_pdn: sd2-pins-as-pdn {
> > +                     samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
> > +                                    "gpf2-4", "gpf2-5";
> > +                     samsung,pin-function = <0>;
> > +                     samsung,pin-pud = <2>;
> > +             };
> > +
>
> No need for blank line.
>

Fixed.

> > +     };
> > +
> > +     /* CORE */
> > +     pinctrl@12070000 {
> > +             gpf0: gpf0 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             sd0_clk: sd0-clk {
> > +                     samsung,pins = "gpf0-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <3>;
> > +             };
> > +
> > +             sd0_cmd: sd0-cmd {
> > +                     samsung,pins = "gpf0-1";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <3>;
> > +             };
> > +
> > +             sd0_rdqs: sd0-rdqs {
> > +                     samsung,pins = "gpf0-2";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <1>;
> > +                     samsung,pin-drv = <3>;
> > +             };
> > +
> > +             sd0_nreset: sd0-nreset {
> > +                     samsung,pins = "gpf0-3";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <3>;
> > +             };
> > +
> > +             sd0_clk_fast_slew_rate_1x: sd0-clk_fast_slew_rate_1x {
> > +                     samsung,pins = "gpf0-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <1>;
> > +             };
> > +
> > +             sd0_clk_fast_slew_rate_2x: sd0-clk_fast_slew_rate_2x {
> > +                     samsung,pins = "gpf0-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sd0_clk_fast_slew_rate_3x: sd0-clk_fast_slew_rate_3x {
> > +                     samsung,pins = "gpf0-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sd0_clk_fast_slew_rate_4x: sd0-clk_fast_slew_rate_4x {
> > +                     samsung,pins = "gpf0-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <3>;
> > +             };
> > +
> > +             gpf1: gpf1 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             sd0_bus1: sd0-bus-width1 {
> > +                     samsung,pins = "gpf1-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <3>;
> > +             };
> > +
> > +             sd0_bus4: sd0-bus-width4 {
> > +                     samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <3>;
> > +             };
> > +
> > +             sd0_bus8: sd0-bus-width8 {
> > +                     samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <3>;
> > +             };
> > +     };
> > +
> > +     /* PERI */
> > +     pinctrl@139b0000 {
> > +             gpg0: gpg0 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             gpp0: gpp0 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +             gpp1: gpp1 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             gpp2: gpp2 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             gpg1: gpg1 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             gpg2: gpg2 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             gpg3: gpg3 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             gpc0: gpc0 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             gpc1: gpc1 {
> > +                     gpio-controller;
> > +                     #gpio-cells = <2>;
> > +
> > +                     interrupt-controller;
> > +                     #interrupt-cells = <2>;
> > +             };
> > +
> > +             xclkout: xclkout {
> > +                     samsung,pins = "gpq0-2";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +             };
> > +
> > +             /* usi_hsi2c_0 */
>
> Comment seems to duplicate node name/label.
>

I think the comment is useful, maybe just designed poorly. It's
pointing out that this HS-I2C block is based on USI IP-core. Basically
we have 7 USI blocks in this SoC:
  - 5 USIs that pre-defined: HSI2C0, HSI2C1, HSI2C2, UART0 and SPI0;
although AFAIU they can be changed via System Register as well, but
seems like nobody does that
  - 2 USIs from CMGP blocks (CMGP0 and CMGP1), which are actually configurable

I will revise all such comments like this, just to show those blocks
are based on USI design:

    /* USI: HSI2C0 */

At least when I was bringing up this board, I was really confused for
long time about this USI business. So I'm sure some kind of comments
might be actually helpful. And that's one reason to keep
exynos850-usi.dtsi file: although I removed it for now, squashing it
into exynos850.dtsi, I think it might be a good idea to bring that
back once all USI nodes are described. Just thinking aloud :)

> > +             hsi2c0_bus: hsi2c0-bus {
> > +                     samsung,pins = "gpc1-0", "gpc1-1";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             /* usi_hsi2c_1 */
> > +             hsi2c1_bus: hsi2c1-bus {
> > +                     samsung,pins = "gpc1-2", "gpc1-3";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             /* usi_hsi2c_2 */
> > +             hsi2c2_bus: hsi2c2-bus {
> > +                     samsung,pins = "gpc1-4", "gpc1-5";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             /* usi_spi_0 */
> > +             spi0_bus: spi0-bus {
> > +                     samsung,pins = "gpp2-0", "gpp2-2", "gpp2-3";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             spi0_cs: spi0-cs {
> > +                     samsung,pins = "gpp2-1";
> > +                     samsung,pin-function = <1>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             spi0_cs_func: spi0-cs-func {
> > +                     samsung,pins = "gpp2-1";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             i2c0_bus: i2c0-bus {
> > +                     samsung,pins = "gpp0-0", "gpp0-1";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             i2c1_bus: i2c1-bus {
> > +                     samsung,pins = "gpp0-2", "gpp0-3";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             i2c2_bus: i2c2-bus {
> > +                     samsung,pins = "gpp0-4", "gpp0-5";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             i2c3_bus: i2c3-bus {
> > +                     samsung,pins = "gpp1-0", "gpp1-1";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             i2c4_bus: i2c4-bus {
> > +                     samsung,pins = "gpp1-2", "gpp1-3";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <3>;
> > +                     samsung,pin-drv = <0>;
> > +             };
> > +
> > +             fm_lna_en: fm-lna-en {
> > +                     samsung,pins = "gpg2-3";
> > +                     samsung,pin-function = <1>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-val = <0>;
> > +             };
> > +
> > +             sensor_mclk0_in: sensor-mclk0-in {
> > +                     samsung,pins = "gpc0-0";
> > +                     samsung,pin-function = <0>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sensor_mclk0_out: sensor-mclk0-out {
> > +                     samsung,pins = "gpc0-0";
> > +                     samsung,pin-function = <1>;
> > +                     samsung,pin-pud = <1>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sensor_mclk0_fn: sensor-mclk0-fn {
>
> No, seriously. What sensor is it? In SoC?
>

In this context, "sensor" stands for "camera". Of course, it resides
(or rather *may* reside) outside of the SoC. This is just useful pin
configuration for camera master clock lines (3 of them). On schematic
those 3 lines are grouped into "MCLK" block, and those pins main
function is CAM_MCLK. I guess it makes sense to keep those
definitions, as I doubt somebody would actually consider using those
lines for somthing else. Or I can remove all those sensor*
definitions, if you'd like, then those can be added later, when camera
support cames in.

> > +                     samsung,pins = "gpc0-0";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sensor_mclk1_in: sensor-mclk1-in {
> > +                     samsung,pins = "gpc0-1";
> > +                     samsung,pin-function = <0>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sensor_mclk1_out: sensor-mclk1-out {
> > +                     samsung,pins = "gpc0-1";
> > +                     samsung,pin-function = <1>;
> > +                     samsung,pin-pud = <1>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sensor_mclk1_fn: sensor-mclk1-fn {
> > +                     samsung,pins = "gpc0-1";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sensor_mclk2_in: sensor-mclk2-in {
> > +                     samsung,pins = "gpc0-2";
> > +                     samsung,pin-function = <0>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sensor_mclk2_out: sensor-mclk2-out {
> > +                     samsung,pins = "gpc0-2";
> > +                     samsung,pin-function = <1>;
> > +                     samsung,pin-pud = <1>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +
> > +             sensor_mclk2_fn: sensor-mclk2-fn {
> > +                     samsung,pins = "gpc0-2";
> > +                     samsung,pin-function = <2>;
> > +                     samsung,pin-pud = <0>;
> > +                     samsung,pin-drv = <2>;
> > +             };
> > +     };
> > +};
> > diff --git a/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi b/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi
> > new file mode 100644
> > index 000000000000..fb243e0a6260
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/exynos/exynos850-usi.dtsi
> > @@ -0,0 +1,30 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Samsung's Exynos850 SoC USI device tree source
> > + *
> > + * Copyright (C) 2019 Samsung Electronics Co., Ltd.
> > + * Copyright (C) 2021 Linaro Ltd.
> > + *
> > + * Samsung's Exynos850 SoC USI channels are listed in this file as device tree
> > + * nodes.
>
> Why here not in exynos850.dtsi?
>

Yeah, you're right. As it's only serial_0 for now, I've moved that
into exynos850.dtsi and removed exynos850-usi.dtsi.

> > + */
> > +
> > +#include <dt-bindings/clock/exynos850.h>
> > +
> > +/ {
> > +     aliases {
> > +             uart0 = &serial_0;
> > +     };
> > +
> > +     /* USI_UART */
> > +     serial_0: uart@13820000 {
>
> This should ne in soc node.
>

Done.

> > +             compatible = "samsung,exynos850-uart";
> > +             reg = <0x0 0x13820000 0x100>;
> > +             interrupts = <GIC_SPI INTREQ__UART IRQ_TYPE_LEVEL_HIGH>;
> > +             pinctrl-names = "default";
> > +             pinctrl-0 = <&uart0_bus>;
> > +             clocks = <&clock GATE_UART_QCH>, <&clock DOUT_UART>;
> > +             clock-names = "gate_uart_clk0", "uart";
> > +             status = "disabled";
> > +     };
> > +};
> > diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
> > new file mode 100644
> > index 000000000000..ed2d1c8ae0c3
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
> > @@ -0,0 +1,245 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Samsung Exynos850 SoC device tree source
> > + *
> > + * Copyright (C) 2018 Samsung Electronics Co., Ltd.
> > + * Copyright (C) 2021 Linaro Ltd.
> > + *
> > + * Samsung Exynos850 SoC device nodes are listed in this file.
> > + * Exynos based board files can include this file and provide
> > + * values for board specific bindings.
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/exynos850.h>
> > +#include <dt-bindings/clock/exynos850.h>
> > +#include "exynos850-pinctrl.dtsi"
> > +#include "exynos850-usi.dtsi"
> > +
> > +/ {
>
> Add a comment like:
> /* Also known under engineering name exynos3830 */
>

Sure.

> > +     compatible = "samsung,exynos850";
>
> Undocumented compatible. Checkpatch should complain.
>

It actually doesn't, though it does complain about other undocumented
compatibles. I understand that it should be documented in
samsung-boards.yaml, but is it ok with you if I do that later, when
adding some actual board's dts? Just don't want to have two patches
for that.

> > +     interrupt-parent = <&gic>;
> > +     #address-cells = <2>;
> > +     #size-cells = <1>;
> > +
> > +     aliases {
> > +             pinctrl0 = &pinctrl_0;
> > +             pinctrl1 = &pinctrl_1;
> > +             pinctrl2 = &pinctrl_2;
> > +             pinctrl3 = &pinctrl_3;
> > +             pinctrl4 = &pinctrl_4;
> > +             pinctrl5 = &pinctrl_5;
> > +     };
> > +
> > +     cpus {
> > +             #address-cells = <2>;
> > +             #size-cells = <0>;
> > +
> > +             cpu-map {
> > +                     cluster0 {
> > +                             core0 {
> > +                                     cpu = <&cpu0>;
> > +                             };
> > +                             core1 {
> > +                                     cpu = <&cpu1>;
> > +                             };
> > +                             core2 {
> > +                                     cpu = <&cpu2>;
> > +                             };
> > +                             core3 {
> > +                                     cpu = <&cpu3>;
> > +                             };
> > +                     };
> > +
> > +                     cluster1 {
> > +                             core0 {
> > +                                     cpu = <&cpu4>;
> > +                             };
> > +                             core1 {
> > +                                     cpu = <&cpu5>;
> > +                             };
> > +                             core2 {
> > +                                     cpu = <&cpu6>;
> > +                             };
> > +                             core3 {
> > +                                     cpu = <&cpu7>;
> > +                             };
> > +                     };
> > +             };
> > +
> > +             cpu0: cpu@0000 {
> > +                     device_type = "cpu";
> > +                     compatible = "arm,cortex-a55", "arm,armv8";
> > +                     reg = <0x0 0x0000>;
>
> reg = <0x0 0x0>;
> (in following places similarly)
>

Done, and also fixed @0000 stuff, while at it.

> > +                     enable-method = "psci";
> > +             };
> > +             cpu1: cpu@0001 {
> > +                     device_type = "cpu";
> > +                     compatible = "arm,cortex-a55", "arm,armv8";
> > +                     reg = <0x0 0x0001>;
> > +                     enable-method = "psci";
> > +             };
> > +             cpu2: cpu@0002 {
> > +                     device_type = "cpu";
> > +                     compatible = "arm,cortex-a55", "arm,armv8";
> > +                     reg = <0x0 0x0002>;
> > +                     enable-method = "psci";
> > +             };
> > +             cpu3: cpu@0003 {
> > +                     device_type = "cpu";
> > +                     compatible = "arm,cortex-a55", "arm,armv8";
> > +                     reg = <0x0 0x0003>;
> > +                     enable-method = "psci";
> > +             };
> > +             cpu4: cpu@0004 {
> > +                     device_type = "cpu";
> > +                     compatible = "arm,cortex-a55", "arm,armv8";
> > +                     reg = <0x0 0x0100>;
> > +                     enable-method = "psci";
> > +             };
> > +             cpu5: cpu@0005 {
> > +                     device_type = "cpu";
> > +                     compatible = "arm,cortex-a55", "arm,armv8";
> > +                     reg = <0x0 0x0101>;
> > +                     enable-method = "psci";
> > +             };
> > +             cpu6: cpu@0006 {
> > +                     device_type = "cpu";
> > +                     compatible = "arm,cortex-a55", "arm,armv8";
> > +                     reg = <0x0 0x0102>;
> > +                     enable-method = "psci";
> > +             };
> > +             cpu7: cpu@0007 {
> > +                     device_type = "cpu";
> > +                     compatible = "arm,cortex-a55", "arm,armv8";
> > +                     reg = <0x0 0x0103>;
> > +                     enable-method = "psci";
> > +             };
> > +     };
> > +
> > +     psci {
> > +             compatible = "arm,psci-1.0";
> > +             method = "smc";
> > +     };
> > +
> > +     gic: interrupt-controller@12a00000 {
> > +             compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> > +             #interrupt-cells = <3>;
> > +             #address-cells = <0>;
> > +             interrupt-controller;
> > +             reg = <0x0 0x12a01000 0x1000>,
> > +                   <0x0 0x12a02000 0x1000>,
> > +                   <0x0 0x12a04000 0x2000>,
> > +                   <0x0 0x12a06000 0x2000>;
> > +             interrupts = <GIC_PPI 9
> > +                             (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> > +     };
> > +
> > +     timer {
> > +             compatible = "arm,armv8-timer";
> > +             interrupts = <GIC_PPI 13
> > +                             (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> > +                          <GIC_PPI 14
> > +                             (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> > +                          <GIC_PPI 11
> > +                             (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> > +                          <GIC_PPI 10
> > +                             (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> > +             clock-frequency = <26000000>;
> > +             use-clocksource-only;
> > +             use-physical-timer;
> > +     };
> > +
>
> All below should be under soc node.
>

Done.

> Please don't write new DTS/DTSI from scratch but use exynos5433.dtsi as
> template/example.
>

Well, I didn't implement that from scratch :) As you probably figured,
I reworked the vendor's dts (heavily, that is). But yeah, I definitely
re-checked with existing DTs this time (exynos5433 and exynos7
mostly), and tried to follow best practices.

> > +     clock: clock-controller@0x120e0000 {
> > +             compatible = "samsung,exynos850-clock";
> > +             reg = <0x0 0x120e0000 0x8000>;
> > +             #clock-cells = <1>;
> > +     };
> > +
> > +     /* ALIVE */
> > +     pinctrl_0: pinctrl@11850000 {
> > +             compatible = "samsung,exynos850-pinctrl";
> > +             reg = <0x0 0x11850000 0x1000>;
> > +             interrupts = <GIC_SPI INTREQ__ALIVE_EINT0 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT1 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT2 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT3 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT4 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT5 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT6 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT7 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT8 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT9 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT10 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT11 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT12 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT13 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT14 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT15 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT16 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT17 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT18 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT19 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT20 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT21 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT22 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT23 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT24 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT25 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT26 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT27 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT28 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT29 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT30 IRQ_TYPE_LEVEL_HIGH>,
> > +                          <GIC_SPI INTREQ__ALIVE_EINT31 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +             wakeup-interrupt-controller {
> > +                     compatible = "samsung,exynos7-wakeup-eint";
> > +             };
> > +     };
> > +
> > +     /* CMGP */
> > +     pinctrl_1: pinctrl@11c30000 {
> > +             compatible = "samsung,exynos850-pinctrl";
> > +             reg = <0x0 0x11c30000 0x1000>;
> > +             interrupts =
> > +                     <GIC_SPI INTREQ__CMGP_EXT_INTM00 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI INTREQ__CMGP_EXT_INTM01 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI INTREQ__CMGP_EXT_INTM02 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI INTREQ__CMGP_EXT_INTM03 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI INTREQ__CMGP_EXT_INTM04 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI INTREQ__CMGP_EXT_INTM05 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI INTREQ__CMGP_EXT_INTM06 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI INTREQ__CMGP_EXT_INTM07 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +             wakeup-interrupt-controller {
> > +                     compatible = "samsung,exynos7-wakeup-eint";
> > +             };
> > +     };
> > +
> > +     /* AUD */
> > +     pinctrl_2: pinctrl@14a60000 {
> > +             compatible = "samsung,exynos850-pinctrl";
> > +             reg = <0x0 0x14a60000 0x1000>;
> > +     };
> > +
> > +     /* HSI */
> > +     pinctrl_3: pinctrl@13430000 {
> > +             compatible = "samsung,exynos850-pinctrl";
> > +             reg = <0x0 0x13430000 0x1000>;
> > +             interrupts = <GIC_SPI INTREQ__GPIO_HSI IRQ_TYPE_LEVEL_HIGH>;
> > +     };
> > +
> > +     /* CORE */
> > +     pinctrl_4: pinctrl@12070000 {
> > +             compatible = "samsung,exynos850-pinctrl";
> > +             reg = <0x0 0x12070000 0x1000>;
> > +             interrupts = <GIC_SPI INTREQ__GPIO_CORE IRQ_TYPE_LEVEL_HIGH>;
> > +     };
> > +
> > +     /* PERI */
> > +     pinctrl_5: pinctrl@139b0000 {
> > +             compatible = "samsung,exynos850-pinctrl";
> > +             reg = <0x0 0x139b0000 0x1000>;
> > +             interrupts = <GIC_SPI INTREQ__GPIO_PERI IRQ_TYPE_LEVEL_HIGH>;
> > +     };
> > +};
> >
>
>
> Best regards,
> Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux