From: Yu Chen <chenyu56@xxxxxxxxxx> This patch adds binding documentation to support USB HUB and USB data role switch of HiSilicon HiKey960 and HiKey970 boards. [mchehab: updated OF names and added support for HiKey970] Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> --- .../bindings/misc/hisilicon,hikey-usb.yaml | 95 +++++++++++++++++++ 1 file changed, 95 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml diff --git a/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml new file mode 100644 index 000000000000..857f9bd802fe --- /dev/null +++ b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Linaro Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/hisilicon,hikey-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiKey960/970 onboard USB GPIO Hub + +maintainers: + - John Stultz <john.stultz@xxxxxxxxxx> + +description: | + Supports the onboard USB GPIO hub found on HiKey960/970. + The HUB, which acts as a role-switch intermediary to detect the state of + the USB-C port, to switch the hub into dual-role USB-C or host mode, + which enables the onboard USB-A host ports. + + Schematics about the hub can be found here: + https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf + https://www.96boards.org/documentation/consumer/hikey/hikey970/hardware-docs/files/hikey970-schematics.pdf + +properties: + compatible: + enum: + - hisilicon,gpio_hubv1 + - hisilicon,kirin970_hikey_usbhub + + typec-vbus: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: phandle to the typec-vbus gpio + + otg-switch: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: phandle to the otg-switch gpio + + hub-vdd33-en: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: phandle to the hub 3.3v power enablement gpio + + hub_reset_en_gpio: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle to the hub reset gpio + + usb-role-switch: + $ref: /schemas/types.yaml#/definitions/flag + description: Support role switch. + + hub-vdd-supply: + description: regulator for hub power + + port: + description: | + any connector to the data bus of this controller should be modelled + using the OF graph bindings specified, if the "usb-role-switch" + property is used. Note for this driver, two ports are supported, + the first being the endpoint that will be notified by this driver, + and the second being the endpoint that notifies this driver of a + role switch. + + +required: + - compatible + - typec-vbus + - otg-switch + - usb-role-switch + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + hisi_hikey_usb: hisi_hikey_usb { + compatible = "hisilicon,gpio_hubv1"; + typec-vbus = <&gpio25 2 GPIO_ACTIVE_HIGH>; + otg-switch = <&gpio25 6 GPIO_ACTIVE_HIGH>; + hub-vdd33-en = <&gpio5 6 GPIO_ACTIVE_HIGH>; + usb-role-switch; + + port { + #address-cells = <1>; + #size-cells = <0>; + + hikey_usb_ep0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dwc3_role_switch>; + }; + hikey_usb_ep1: endpoint@1 { + reg = <1>; + remote-endpoint = <&rt1711h_ep>; + }; + }; + }; -- 2.31.1
