It is being observed some time the Ethernet interface will not send / recive any packet after reboot. Earlier I had submitted Ethernet reset ID patch but it did not resolve it issue much, Adding new reset controller of the Ethernet PHY for Amlogic SoC could help resolve the issue. Thanks -Anand Anand Moon (3): arm64: dts: amlogic: add missing ethernet reset ID ARM: dts: meson: Use new reset id for reset controller net: stmmac: dwmac-meson8b: Add reset controller for ethernet phy arch/arm/boot/dts/meson8b.dtsi | 2 +- arch/arm/boot/dts/meson8m2.dtsi | 2 +- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 ++ .../boot/dts/amlogic/meson-g12-common.dtsi | 2 ++ arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 3 +++ .../ethernet/stmicro/stmmac/dwmac-meson8b.c | 20 +++++++++++++++++++ 6 files changed, 29 insertions(+), 2 deletions(-) -- 2.32.0
