On 7/29/21 6:52 AM, Konrad Dybcio wrote:
On 29.07.2021 12:50, Thara Gopinath wrote:
Hi Konrad,
On 7/28/21 6:25 PM, Konrad Dybcio wrote:
This will enable temperature reporting for various SoC
components.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
arch/arm64/boot/dts/qcom/sdm630.dtsi | 11 +++++++++++
2 files changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 4a2eaf28e3fd..d3b9e9b600a2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -48,6 +48,7 @@ properties:
- qcom,sc7180-tsens
- qcom,sc7280-tsens
- qcom,sc8180x-tsens
+ - qcom,sdm630-tsens
- qcom,sdm845-tsens
- qcom,sm8150-tsens
- qcom,sm8250-tsens
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 1e54828817d5..7e9c80e35fba 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -627,6 +627,17 @@ mnoc: interconnect@1745000 {
<&mmcc AHB_CLK_SRC>;
};
+ tsens: thermal-sensor@10ae000 {
+ compatible = "qcom,sdm630-tsens", "qcom,tsens-v2";
+ reg = <0x010ae000 0x1000>, /* TM */
+ <0x010ad000 0x1000>; /* SROT */
+ #qcom,sensors = <12>;
Are all 12 sensors used ? I see that in a later patch "arm64: dts: qcom: sdm630: Add thermal-zones configuration" only 9 are used.
Hi,
if I recall correctly, they all give output but not all of the mappings were documented in the downstream sources and we have no documentation whatsoever :(
Right. In that case, why not change #qcom,sensors to 9 and add rest of
the sensors if and when needed ?
Konrad
--
Warm Regards
Thara (She/Her/Hers)
