Re: [PATCH v2 11/11] memory: mtk-smi: mt8195: Add initial setting for smi-larb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ikjoon,

Just a ping.

On Thu, 2021-07-22 at 14:38 +0800, Yong Wu wrote:
> On Wed, 2021-07-21 at 21:40 +0800, Ikjoon Jang wrote:
> > On Thu, Jul 15, 2021 at 8:23 PM Yong Wu <yong.wu@xxxxxxxxxxxx> wrote:
> > >
> > > To improve the performance, We add some initial setting for smi larbs.
> > > there are two part:
> > > 1), Each port has the special ostd(outstanding) value in each larb.
> > > 2), Two general setting for each larb.
> > >
> > > In some SoC, this setting maybe changed dynamically for some special case
> > > like 4K, and this initial setting is enough in mt8195.
> > >
> > > Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
> > > ---
> [...]
> > >  struct mtk_smi {
> > > @@ -213,12 +228,22 @@ static void mtk_smi_larb_config_port_mt8173(struct device *dev)
> > >  static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
> > >  {
> > >         struct mtk_smi_larb *larb = dev_get_drvdata(dev);
> > > -       u32 reg;
> > > +       u32 reg, flags_general = larb->larb_gen->flags_general;
> > > +       const u8 *larbostd = larb->larb_gen->ostd[larb->larbid];
> > >         int i;
> > >
> > >         if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
> > >                 return;
> > >
> > > +       if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_LARB_THRT_EN))
> > > +               writel_relaxed(SMI_LARB_THRT_EN, larb->base + SMI_LARB_CMD_THRT_CON);
> > > +
> > > +       if (MTK_SMI_CAPS(flags_general, MTK_SMI_FLAG_LARB_SW_FLAG))
> > > +               writel_relaxed(SMI_LARB_SW_FLAG_1, larb->base + SMI_LARB_SW_FLAG);
> > > +
> > > +       for (i = 0; i < SMI_LARB_PORT_NR_MAX && larbostd && !!larbostd[i]; i++)
> > > +               writel_relaxed(larbostd[i], larb->base + SMI_LARB_OSTDL_PORTx(i));
> > 
> > All other mtk platform's larbs have the same format for SMI_LARB_OSTDL_PORTx()
> > registers at the same offset? or is this unique feature for mt8195?
> 
> All the other Platform's larbs have the same format at the same offset.

In this case, Do you have some other further comment? If no, I will keep
the current solution for this.

Thanks.

> 
> > 
> > > +
> > >         for_each_set_bit(i, (unsigned long *)larb->mmu, 32) {
> > >                 reg = readl_relaxed(larb->base + SMI_LARB_NONSEC_CON(i));
> > >                 reg |= F_MMU_EN;
> > > @@ -227,6 +252,51 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
> > >         }
> > >  }
> > >
> 
> [...]
> 





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux