Good Morning, This series aims to fix some early issues with the rk356x and enable nodes that are currently supported by the available drivers. 1. fixes the mbi-alias, which points to the wrong location 2. fixes the rockchip clk-pll to work without a grf node 3. adds the gpio debounce clocks which are necessary for gpio to bind 4. adds the common gmac1 node 5. adds the tsadc nodes 6. adjusts the gpll and ppll clocks to better support hardware 7. enables the gmac1 on the Quartz64 8. adds thermal support to the Quartz64 Changelog: v2: Drop "dt-bindings: gpio: rockchip,gpio-bank: increase max clocks" Drop "arm64: dts: rockchip: add missing rk3568 cru phandles" Add clk-pll fix patch as suggested by Heiko Move ethernet alias to Quartz64 board as suggested by Heiko Adjust tsadc pinctrl as suggested by Heiko and Johan Move tsadc mode and polarity to Quartz64 board Peter Geis (8): arm64: dts: rockchip: fix rk3568 mbi-alias clk: rockchip: fix clk-pll rk356x early pll init arm64: dts: rockchip: add rk356x gpio debounce clocks arm64: dts: rockchip: add rk356x gmac1 node arm64: dts: rockchip: add rk3568 tsadc nodes arm64: dts: rockchip: adjust rk3568 pll clocks arm64: dts: rockchip: enable gmac node on quartz64-a arm64: dts: rockchip: add thermal support to Quartz64 Model A .../boot/dts/rockchip/rk3566-quartz64-a.dts | 71 ++++++++++ .../boot/dts/rockchip/rk3568-pinctrl.dtsi | 7 + arch/arm64/boot/dts/rockchip/rk356x.dtsi | 131 +++++++++++++++++- drivers/clk/rockchip/clk-pll.c | 2 +- 4 files changed, 204 insertions(+), 7 deletions(-) -- 2.25.1
