On Wed, Jul 21, 2021 at 04:03:53PM +0200, Maxime Ripard wrote:
> The X-Powers AC100 hybrid devices are supported by Linux thanks to its
> device tree binding.
>
> Now that we have the DT validation in place, let's convert the device
> tree bindings for that driver over to a YAML schema.
>
> Cc: Chen-Yu Tsai <wens@xxxxxxxx>
> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> Signed-off-by: Maxime Ripard <maxime@xxxxxxxxxx>
> ---
> .../devicetree/bindings/mfd/ac100.txt | 50 --------
> .../bindings/mfd/x-powers,ac100.yaml | 113 ++++++++++++++++++
> 2 files changed, 113 insertions(+), 50 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mfd/ac100.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/ac100.txt b/Documentation/devicetree/bindings/mfd/ac100.txt
> deleted file mode 100644
> index dff219f07493..000000000000
> --- a/Documentation/devicetree/bindings/mfd/ac100.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -X-Powers AC100 Codec/RTC IC Device Tree bindings
> -
> -AC100 is a audio codec and RTC subsystem combo IC. The 2 parts are
> -separated, including power supplies and interrupt lines, but share
> -a common register address space and host interface.
> -
> -Required properties:
> -- compatible: "x-powers,ac100"
> -- reg: The I2C slave address or RSB hardware address for the chip
> -- sub-nodes:
> - - codec
> - - compatible: "x-powers,ac100-codec"
> - - interrupts: SoC NMI / GPIO interrupt connected to the
> - IRQ_AUDIO pin
> - - #clock-cells: Shall be 0
> - - clock-output-names: "4M_adda"
> -
> - - see clock/clock-bindings.txt for common clock bindings
> -
> - - rtc
> - - compatible: "x-powers,ac100-rtc"
> - - clocks: A phandle to the codec's "4M_adda" clock
> - - #clock-cells: Shall be 1
> - - clock-output-names: "cko1_rtc", "cko2_rtc", "cko3_rtc"
> -
> - - see clock/clock-bindings.txt for common clock bindings
> -
> -Example:
> -
> -ac100: codec@e89 {
> - compatible = "x-powers,ac100";
> - reg = <0xe89>;
> -
> - ac100_codec: codec {
> - compatible = "x-powers,ac100-codec";
> - interrupt-parent = <&r_pio>;
> - interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
> - #clock-cells = <0>;
> - clock-output-names = "4M_adda";
> - };
> -
> - ac100_rtc: rtc {
> - compatible = "x-powers,ac100-rtc";
> - interrupt-parent = <&nmi_intc>;
> - interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> - clocks = <&ac100_codec>;
> - #clock-cells = <1>;
> - clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
> - };
> -};
> diff --git a/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
> new file mode 100644
> index 000000000000..6990765076b8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
> @@ -0,0 +1,113 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: X-Powers AC100 Device Tree Bindings
> +
> +maintainers:
> + - Chen-Yu Tsai <wens@xxxxxxxx>
> +
> +properties:
> + compatible:
> + const: x-powers,ac100
> +
> + reg:
> + maxItems: 1
> +
> + codec:
> + type: object
> +
> + properties:
> + "#clock-cells":
> + const: 0
> +
> + compatible:
> + const: x-powers,ac100-codec
> +
> + interrupts:
> + maxItems: 1
> +
> + clock-output-names:
> + description: >
> + Name of the 4M_adda clock exposed by the codec
maxItems: 1
> +
> + required:
> + - "#clock-cells"
> + - compatible
> + - interrupts
> + - clock-output-names
> +
> + additionalProperties: false
> +
> + rtc:
> + type: object
> +
> + properties:
> + "#clock-cells":
> + const: 1
> +
> + compatible:
> + const: x-powers,ac100-rtc
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + description: >
> + A phandle to the codec's "4M_adda" clock
maxItems: 1
> +
> + clock-output-names:
> + description: >
> + Name of the cko1, cko2 and cko3 clocks exposed by the codec
maxItems: 3
> +
> + required:
> + - "#clock-cells"
> + - compatible
> + - interrupts
> + - clocks
> + - clock-output-names
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - codec
> + - rtc
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + rsb {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + codec@e89 {
> + compatible = "x-powers,ac100";
> + reg = <0xe89>;
> +
> + ac100_codec: codec {
> + compatible = "x-powers,ac100-codec";
> + interrupt-parent = <&r_pio>;
> + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PL9 */
> + #clock-cells = <0>;
> + clock-output-names = "4M_adda";
> + };
> +
> + ac100_rtc: rtc {
> + compatible = "x-powers,ac100-rtc";
> + interrupt-parent = <&nmi_intc>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&ac100_codec>;
> + #clock-cells = <1>;
> + clock-output-names = "cko1_rtc", "cko2_rtc", "cko3_rtc";
> + };
> + };
> + };
> +
> +...
> --
> 2.31.1
>
>
