[PATCH v2 0/3] arm64: dts: allwinner: h6: tanix-tx6: Enable eMMC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tanix TX6 box has a 32 GB eMMC module. With changes in this series, I
get following figures with hdparm -tT:

/dev/mmcblk2:
 Timing cached reads:   1638 MB in  2.00 seconds = 818.44 MB/sec
 Timing buffered disk reads: 376 MB in  3.01 seconds = 124.74 MB/sec

First patch fixes regulator node names. Second patch sets proper power
supplies to GPIO banks and third adds eMMC support.

Please take a look.

Best regards,
Jernej Skrabec

Changes from v1:
- added patch 1 (fixing regulator node names with "regulator-" prefix)
- fixed regulator node name in patch 2 (adding "regulator-" prefix)

Jernej Skrabec (3):
  arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node names
  arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies
  arm64: dts: allwinner: h6: tanix-tx6: enable emmc

 .../dts/allwinner/sun50i-h6-tanix-tx6.dts     | 27 +++++++++++++++++--
 1 file changed, 25 insertions(+), 2 deletions(-)

-- 
2.32.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux