This adds the description for the i.MX8MM disp blk-ctrl.
Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
drivers/soc/imx/imx8m-blk-ctrl.c | 70 ++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index 3dd17b903636..32eab800a3c6 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -433,11 +433,81 @@ static const struct imx8m_blk_ctrl_data imx8m_vpu_blk_ctl_dev_data = {
.num_domains = ARRAY_SIZE(imx8m_vpu_blk_ctl_domain_data),
};
+static int imx8mm_disp_power_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ struct imx8m_blk_ctrl *bc = container_of(nb, struct imx8m_blk_ctrl,
+ power_nb);
+
+ if (action != GENPD_NOTIFY_ON && action != GENPD_NOTIFY_PRE_OFF)
+ return NOTIFY_OK;
+
+ /* Enable bus clock and deassert bus reset */
+ regmap_set_bits(bc->regmap, BLK_CLK_EN, BIT(12));
+ regmap_set_bits(bc->regmap, BLK_SFT_RSTN, BIT(6));
+
+ /*
+ * On power up we have no software backchannel to the GPC to
+ * wait for the ADB handshake to happen, so we just delay for a
+ * bit. On power down the GPC driver waits for the handshake.
+ */
+ if (action == GENPD_NOTIFY_ON)
+ udelay(5);
+
+
+ return NOTIFY_OK;
+}
+
+static const struct imx8m_blk_ctrl_domain_data imx8m_disp_blk_ctl_domain_data[] = {
+ [IMX8MM_DISPBLK_CSI_BRIDGE] = {
+ .name = "dispblk-csi-bridge",
+ .clk_names = (const char *[]){ "csi-bridge-axi", "csi-bridge-apb",
+ "csi-bridge-core", },
+ .num_clks = 3,
+ .gpc_name = "csi-bridge",
+ .rst_mask = BIT(0) | BIT(1) | BIT(2),
+ .clk_mask = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),
+ },
+ [IMX8MM_DISPBLK_LCDIF] = {
+ .name = "dispblk-lcdif",
+ .clk_names = (const char *[]){ "lcdif-axi", "lcdif-apb", "lcdif-pix", },
+ .num_clks = 3,
+ .gpc_name = "lcdif",
+ .clk_mask = BIT(6) | BIT(7),
+ },
+ [IMX8MM_DISPBLK_MIPI_DSI] = {
+ .name = "dispblk-mipi-dsi",
+ .clk_names = (const char *[]){ "dsi-pclk", "dsi-ref", },
+ .num_clks = 2,
+ .gpc_name = "mipi-dsi",
+ .rst_mask = BIT(5),
+ .clk_mask = BIT(8) | BIT(9),
+ },
+ [IMX8MM_DISPBLK_MIPI_CSI] = {
+ .name = "dispblk-mipi-csi",
+ .clk_names = (const char *[]){ "csi-aclk", "csi-pclk" },
+ .num_clks = 2,
+ .gpc_name = "mipi-csi",
+ .rst_mask = BIT(3) | BIT(4),
+ .clk_mask = BIT(10) | BIT(11),
+ },
+};
+
+static const struct imx8m_blk_ctrl_data imx8m_disp_blk_ctl_dev_data = {
+ .max_reg = 0x2c,
+ .power_notifier_fn = imx8mm_disp_power_notifier,
+ .domains = imx8m_disp_blk_ctl_domain_data,
+ .num_domains = ARRAY_SIZE(imx8m_disp_blk_ctl_domain_data),
+};
+
static const struct of_device_id imx8m_blk_ctrl_of_match[] = {
{
.compatible = "fsl,imx8mm-vpu-blk-ctrl",
.data = &imx8m_vpu_blk_ctl_dev_data
}, {
+ .compatible = "fsl,imx8mm-disp-blk-ctrl",
+ .data = &imx8m_disp_blk_ctl_dev_data
+ } ,{
/* Sentinel */
}
};
--
2.30.2
