On 15-07-21, 14:48, Chunfeng Yun wrote:
> The controller is designed to use use PLL integer mode, but
> in fact used fractional mode for some ones on mt8195, this
> causes signal degradation (e.g. eye diagram test fail), fix
> it by switching PLL to 26Mhz from default 48Mhz to improve
> signal quality.
>
> Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> ---
> v2~3: no changes
> ---
> drivers/phy/mediatek/phy-mtk-tphy.c | 52 +++++++++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
> index 42a1174da6cc..c3dc1763a7eb 100644
> --- a/drivers/phy/mediatek/phy-mtk-tphy.c
> +++ b/drivers/phy/mediatek/phy-mtk-tphy.c
> @@ -41,6 +41,8 @@
>
> #define U3P_USBPHYACR0 0x000
> #define PA0_RG_U2PLL_FORCE_ON BIT(15)
> +#define PA0_USB20_PLL_PREDIV GENMASK(7, 6)
> +#define PA0_USB20_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6)
> #define PA0_RG_USB20_INTR_EN BIT(5)
>
> #define U3P_USBPHYACR1 0x004
> @@ -52,6 +54,8 @@
> #define PA1_RG_TERM_SEL_VAL(x) ((0x7 & (x)) << 8)
>
> #define U3P_USBPHYACR2 0x008
> +#define PA2_RG_U2PLL_BW GENMASK(21, 19)
> +#define PA2_RG_U2PLL_BW_VAL(x) ((0x7 & (x)) << 19)
> #define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18)
>
> #define U3P_USBPHYACR5 0x014
> @@ -73,6 +77,14 @@
> #define P2C_USB20_GPIO_MODE BIT(8)
> #define P2C_U2_GPIO_CTR_MSK (P2C_RG_USB20_GPIO_CTL | P2C_USB20_GPIO_MODE)
>
> +#define U3P_U2PHYA_RESV 0x030
> +#define P2R_RG_U2PLL_FBDIV_26M 0x1bb13b
> +#define P2R_RG_U2PLL_FBDIV_48M 0x3c0000
> +
> +#define U3P_U2PHYA_RESV1 0x044
> +#define P2R_RG_U2PLL_REFCLK_SEL BIT(5)
> +#define P2R_RG_U2PLL_FRA_EN BIT(3)
> +
> #define U3D_U2PHYDCR0 0x060
> #define P2C_RG_SIF_U2PLL_FORCE_ON BIT(24)
>
> @@ -277,6 +289,12 @@ enum mtk_phy_version {
> struct mtk_phy_pdata {
> /* avoid RX sensitivity level degradation only for mt8173 */
> bool avoid_rx_sen_degradation;
> + /*
> + * u2phy should use integer mode instead of fractional mode of
> + * 48M PLL, fix it by switching PLL to 26M from default 48M
> + * for mt8195
> + */
> + bool sw_pll_48m_to_26m;
> enum mtk_phy_version version;
> };
>
> @@ -456,6 +474,33 @@ static void u3_phy_instance_init(struct mtk_tphy *tphy,
> dev_dbg(tphy->dev, "%s(%d)\n", __func__, instance->index);
> }
>
> +static void u2_phy_pll_26m_set(struct mtk_tphy *tphy,
> + struct mtk_phy_instance *instance)
> +{
> + struct u2phy_banks *u2_banks = &instance->u2_banks;
> + void __iomem *com = u2_banks->com;
> + u32 tmp;
> +
> + if (!tphy->pdata->sw_pll_48m_to_26m)
> + return;
> +
> + tmp = readl(com + U3P_USBPHYACR0);
> + tmp &= ~PA0_USB20_PLL_PREDIV;
> + tmp |= PA0_USB20_PLL_PREDIV_VAL(0);
> + writel(tmp, com + U3P_USBPHYACR0);
> +
> + tmp = readl(com + U3P_USBPHYACR2);
> + tmp &= ~PA2_RG_U2PLL_BW;
> + tmp |= PA2_RG_U2PLL_BW_VAL(3);
> + writel(tmp, com + U3P_USBPHYACR2);
> +
> + writel(P2R_RG_U2PLL_FBDIV_26M, com + U3P_U2PHYA_RESV);
> +
> + tmp = readl(com + U3P_U2PHYA_RESV1);
> + tmp |= P2R_RG_U2PLL_FRA_EN | P2R_RG_U2PLL_REFCLK_SEL;
> + writel(tmp, com + U3P_U2PHYA_RESV1);
> +}
> +
> static void u2_phy_instance_init(struct mtk_tphy *tphy,
> struct mtk_phy_instance *instance)
> {
> @@ -941,6 +986,7 @@ static int mtk_phy_init(struct phy *phy)
>
> switch (instance->type) {
> case PHY_TYPE_USB2:
> + u2_phy_pll_26m_set(tphy, instance);
should this not be set only for MTK_PHY_V3?
> u2_phy_instance_init(tphy, instance);
> u2_phy_props_set(tphy, instance);
> break;
> @@ -1094,10 +1140,16 @@ static const struct mtk_phy_pdata mt8173_pdata = {
> .version = MTK_PHY_V1,
> };
>
> +static const struct mtk_phy_pdata mt8195_pdata = {
> + .sw_pll_48m_to_26m = true,
> + .version = MTK_PHY_V3,
> +};
> +
> static const struct of_device_id mtk_tphy_id_table[] = {
> { .compatible = "mediatek,mt2701-u3phy", .data = &tphy_v1_pdata },
> { .compatible = "mediatek,mt2712-u3phy", .data = &tphy_v2_pdata },
> { .compatible = "mediatek,mt8173-u3phy", .data = &mt8173_pdata },
> + { .compatible = "mediatek,mt8195-tphy", .data = &mt8195_pdata },
> { .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
> { .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata },
> { .compatible = "mediatek,generic-tphy-v3", .data = &tphy_v3_pdata },
> --
> 2.18.0
--
~Vinod
