Add "interrupt-names" properties to the I2C device nodes, to make it
easier to review the interrupt mappings.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
index 9a7489dc70d10882..0dd181739fdfc0f6 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a07g044.dtsi
@@ -102,6 +102,8 @@ i2c0: i2c@10058000 {
<GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD R9A07G044_I2C0_PCLK>;
clock-frequency = <100000>;
resets = <&cpg R9A07G044_I2C0_MRST>;
@@ -122,6 +124,8 @@ i2c1: i2c@10058400 {
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD R9A07G044_I2C1_PCLK>;
clock-frequency = <100000>;
resets = <&cpg R9A07G044_I2C1_MRST>;
@@ -142,6 +146,8 @@ i2c2: i2c@10058800 {
<GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD R9A07G044_I2C2_PCLK>;
clock-frequency = <100000>;
resets = <&cpg R9A07G044_I2C2_MRST>;
@@ -162,6 +168,8 @@ i2c3: i2c@10058c00 {
<GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tei", "ri", "ti", "spi", "sti",
+ "naki", "ali", "tmoi";
clocks = <&cpg CPG_MOD R9A07G044_I2C3_PCLK>;
clock-frequency = <100000>;
resets = <&cpg R9A07G044_I2C3_MRST>;
--
2.25.1
