Re: [PATCH v9 1/4] dt-bindings:drm/bridge:anx7625:add vendor define flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Xin,

On Wed, Jul 07, 2021 at 03:30:51PM +0800, Xin Ji wrote:
> On Thu, Jun 24, 2021 at 01:57:22PM +0200, Robert Foss wrote:
> > Hey Xin,
> > 
> > I would like to merge this series now, but this patch needs a review
> > first. Maybe Laurent/Rob Herring are good candidates.
>
> Hi Rob, I get Laurent/Rob comments before, and explained why we needs
> these DT properties, so far, I didn't get any response.
> 
> Hi Rob Herring and Laurent, for the DT property lane0/1-swing, Google
> engineer has strong demond for them, they don't want to move DP swing
> adjusting to kernel, thus may cause change the driver code in each
> project, so config them in DT is a best option.

Hardcoding it in the driver is certainly not a good option, but
hardcoding it in DT isn't either unless you can explain how the value
should be computed. "Contact the vendor" isn't good enough.

> > On Tue, 22 Jun 2021 at 14:31, Xin Ji <xji@xxxxxxxxxxxxxxxx> wrote:
> > >
> > > Add 'bus-type' and 'data-lanes' define for port0. Define DP tx lane0,
> > > lane1 swing register array define, and audio enable flag.
> > >
> > > Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> > > ---
> > >  .../display/bridge/analogix,anx7625.yaml      | 57 ++++++++++++++++++-
> > >  1 file changed, 56 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > index ab48ab2f4240..9e604d19a3d5 100644
> > > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > @@ -43,6 +43,26 @@ properties:
> > >    vdd33-supply:
> > >      description: Regulator that provides the supply 3.3V power.
> > >
> > > +  analogix,lane0-swing:
> > > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +    minItems: 1
> > > +    maxItems: 20
> > > +    description:
> > > +      an array of swing register setting for DP tx lane0 PHY, please don't
> > > +      add this property, or contact vendor.
> > > +
> > > +  analogix,lane1-swing:
> > > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > > +    minItems: 1
> > > +    maxItems: 20
> > > +    description:
> > > +      an array of swing register setting for DP tx lane1 PHY, please don't
> > > +      add this property, or contact vendor.
> > > +
> > > +  analogix,audio-enable:
> > > +    type: boolean
> > > +    description: let the driver enable audio HDMI codec function or not.
> > > +
> > >    ports:
> > >      $ref: /schemas/graph.yaml#/properties/ports
> > >
> > > @@ -50,13 +70,43 @@ properties:
> > >        port@0:
> > >          $ref: /schemas/graph.yaml#/properties/port
> > >          description:
> > > -          Video port for MIPI DSI input.
> > > +          MIPI DSI/DPI input.
> > > +
> > > +        properties:
> > > +          endpoint:
> > > +            $ref: /schemas/media/video-interfaces.yaml#
> > > +            type: object
> > > +            additionalProperties: false
> > > +
> > > +            properties:
> > > +              remote-endpoint: true
> > > +              bus-type: true
> > > +              data-lanes: true
> > > +
> > > +            required:
> > > +              - remote-endpoint
> > > +
> > > +        required:
> > > +          - endpoint
> > > +
> > >
> > >        port@1:
> > >          $ref: /schemas/graph.yaml#/properties/port
> > >          description:
> > >            Video port for panel or connector.
> > >
> > > +        properties:
> > > +          endpoint:
> > > +            $ref: /schemas/media/video-interfaces.yaml#
> > > +            type: object
> > > +            additionalProperties: false
> > > +
> > > +            properties:
> > > +              remote-endpoint: true
> > > +
> > > +            required:
> > > +              - remote-endpoint
> > > +
> > >      required:
> > >        - port@0
> > >        - port@1
> > > @@ -87,6 +137,9 @@ examples:
> > >              vdd10-supply = <&pp1000_mipibrdg>;
> > >              vdd18-supply = <&pp1800_mipibrdg>;
> > >              vdd33-supply = <&pp3300_mipibrdg>;
> > > +            analogix,audio-enable;
> > > +            analogix,lane0-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> > > +            analogix,lane1-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> > >
> > >              ports {
> > >                  #address-cells = <1>;
> > > @@ -96,6 +149,8 @@ examples:
> > >                      reg = <0>;
> > >                      anx7625_in: endpoint {
> > >                          remote-endpoint = <&mipi_dsi>;
> > > +                        bus-type = <5>;
> > > +                        data-lanes = <0 1 2 3>;
> > >                      };
> > >                  };
> > >

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux