On 2021-07-09 06:26, Stephen Boyd wrote:
Quoting rojay@xxxxxxxxxxxxxx (2021-07-06 02:19:27)
On 2021-06-08 13:37, rojay@xxxxxxxxxxxxxx wrote:
> On 2021-06-06 09:25, Bjorn Andersson wrote:
>> On Fri 04 Jun 08:54 CDT 2021, Roja Rani Yarubandi wrote:
>>
>>> Add QSPI DT node for SC7280 SoC.
>>>
>>> Signed-off-by: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
>>> ---
>>> Changes in V3:
>>> - Broken the huge V2 patch into 3 smaller patches.
>>> 1. QSPI DT nodes
>>> 2. QUP wrapper_0 DT nodes
>>> 3. QUP wrapper_1 DT nodes
>>>
>>> Changes in V2:
>>> - As per Doug's comments removed pinmux/pinconf subnodes.
>>> - As per Doug's comments split of SPI, UART nodes has been done.
>>> - Moved QSPI node before aps_smmu as per the order.
>>>
>>> arch/arm64/boot/dts/qcom/sc7280-idp.dts | 29 ++++++++++++
>>> arch/arm64/boot/dts/qcom/sc7280.dtsi | 61
>>> +++++++++++++++++++++++++
>>> 2 files changed, 90 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
>>> b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
>>> index 3900cfc09562..d0edffc15736 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
>>> @@ -268,6 +268,22 @@ pmr735b_die_temp {
>>> };
>>> };
>>>
>>> +&qspi {
>>> + status = "okay";
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
>>> +
>>> + flash@0 {
>>> + compatible = "jedec,spi-nor";
>>> + reg = <0>;
>>> +
>>> + /* TODO: Increase frequency after testing */
>>> + spi-max-frequency = <25000000>;
>>> + spi-tx-bus-width = <2>;
>>> + spi-rx-bus-width = <2>;
>>> + };
>>> +};
>>> +
>>> &qupv3_id_0 {
>>> status = "okay";
>>> };
>>> @@ -278,6 +294,19 @@ &uart5 {
>>>
>>> /* PINCTRL - additions to nodes defined in sc7280.dtsi */
>>>
>>> +&qspi_cs0 {
>>> + bias-disable;
>>> +};
>>> +
>>> +&qspi_clk {
>>> + bias-disable;
>>> +};
>>> +
>>> +&qspi_data01 {
>>> + /* High-Z when no transfers; nice to park the lines */
>>> + bias-pull-up;
>>> +};
>>> +
>>> &qup_uart5_default {
>>> tx {
>>> pins = "gpio46";
>>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>> b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>> index 6c9d5eb93f93..3047ab802cd2 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>>> @@ -1061,6 +1061,42 @@ apss_merge_funnel_in: endpoint {
>>> };
>>> };
>>>
>>> + qspi_opp_table: qspi-opp-table {
>>
>> This node doesn't represents anything on the mmio bus, so it shouldn't
>> live in in /soc. Can't you move it into &qspi?
>>
>> Regards,
>> Bjorn
>>
>
> Sure, will move it into qspi node.
>
> Thanks,
> Roja
>
Hi Bjorn,
Moving "qspi_opp_table" inside &qspi node causing this warning:
arch/arm64/boot/dts/qcom/sc7280.dtsi:1055.35-1072.6: Warning
(spi_bus_reg): /soc@0/spi@88dc000/qspi-opp-table: missing or empty reg
property
If DT folks are OK I think we should hard-code 'opp-table' as not a
device for spi to populate on the spi bus and relax the warning in the
devicetree compiler (see [1] for more details). Technically, nodes that
are bus controllers assume all child nodes are devices on that bus. In
this case, we want to stick the opp table as a child of the spi node so
that it can be called 'opp-table' and not be a node in the root of DT.
Shall I keep the qspi-opp-table out of &qspi node?
If you do, please move it to / instead of putting it under /soc as it
doesn't have an address or a reg property.
Hi Bjorn, Rob
Can we move this "qspi_opp_table" to / from /soc?
Thanks,
Roja
[1]
https://github.com/dgibson/dtc/blob/69595a167f06c4482ce784e30df1ac9b16ceb5b0/checks.c#L1844
