Re: [PATCH v14 3/6] usb: dwc3: Resize TX FIFOs to meet EP bursting requirements

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Wesley Cheng wrote:
> Some devices have USB compositions which may require multiple endpoints
> that support EP bursting.  HW defined TX FIFO sizes may not always be
> sufficient for these compositions.  By utilizing flexible TX FIFO
> allocation, this allows for endpoints to request the required FIFO depth to
> achieve higher bandwidth.  With some higher bMaxBurst configurations, using
> a larger TX FIFO size results in better TX throughput.
> 
> By introducing the check_config() callback, the resizing logic can fetch
> the maximum number of endpoints used in the USB composition (can contain
> multiple configurations), which helps ensure that the resizing logic can
> fulfill the configuration(s), or return an error to the gadget layer
> otherwise during bind time.
> 
> Signed-off-by: Wesley Cheng <wcheng@xxxxxxxxxxxxxx>
> ---
>  drivers/usb/dwc3/core.c   |  15 +++
>  drivers/usb/dwc3/core.h   |  16 ++++
>  drivers/usb/dwc3/ep0.c    |   2 +
>  drivers/usb/dwc3/gadget.c | 232 ++++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 265 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index ba74ad7..b194aecd 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1267,6 +1267,7 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>  	u8			rx_max_burst_prd;
>  	u8			tx_thr_num_pkt_prd;
>  	u8			tx_max_burst_prd;
> +	u8			tx_fifo_resize_max_num;
>  	const char		*usb_psy_name;
>  	int			ret;
>  
> @@ -1282,6 +1283,13 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>  	 */
>  	hird_threshold = 12;
>  
> +	/*
> +	 * default to a TXFIFO size large enough to fit 6 max packets.  This
> +	 * allows for systems with larger bus latencies to have some headroom
> +	 * for endpoints that have a large bMaxBurst value.
> +	 */
> +	tx_fifo_resize_max_num = 6;
> +
>  	dwc->maximum_speed = usb_get_maximum_speed(dev);
>  	dwc->max_ssp_rate = usb_get_maximum_ssp_rate(dev);
>  	dwc->dr_mode = usb_get_dr_mode(dev);
> @@ -1325,6 +1333,11 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>  				&tx_thr_num_pkt_prd);
>  	device_property_read_u8(dev, "snps,tx-max-burst-prd",
>  				&tx_max_burst_prd);
> +	dwc->do_fifo_resize = device_property_read_bool(dev,
> +							"tx-fifo-resize");
> +	if (dwc->do_fifo_resize)
> +		device_property_read_u8(dev, "tx-fifo-max-num",
> +					&tx_fifo_resize_max_num);

Why is this check here? The dwc->tx_fifo_resize_max_num should store
whatever property the user sets. Whether the driver wants to use this
property should depend on "dwc->do_fifo_resize". Also why don't we have
"snps," prefix to be consistent with the other properties?

Can we enforce to a single property? If the designer wants to enable
this feature, he/she can to provide the tx-fifo-max-num. This would
simplify the driver a bit. Since this is to optimize for performance,
the user should know/want/test the specific value if they want to set
for their setup and not hoping that the default setting not break their
setup. So we can remove the "do_fifo_resize" property and just check
whether tx_fifo_resize_max_num is set.

>  
>  	dwc->disable_scramble_quirk = device_property_read_bool(dev,
>  				"snps,disable_scramble_quirk");
> @@ -1390,6 +1403,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
>  	dwc->tx_max_burst_prd = tx_max_burst_prd;
>  
>  	dwc->imod_interval = 0;
> +
> +	dwc->tx_fifo_resize_max_num = tx_fifo_resize_max_num;

See comment above

>  }
>  
>  /* check whether the core supports IMOD */
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index dccdf13..735e9be 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1023,6 +1023,7 @@ struct dwc3_scratchpad_array {
>   * @rx_max_burst_prd: max periodic ESS receive burst size
>   * @tx_thr_num_pkt_prd: periodic ESS transmit packet count
>   * @tx_max_burst_prd: max periodic ESS transmit burst size
> + * @tx_fifo_resize_max_num: max number of fifos allocated during txfifo resize
>   * @hsphy_interface: "utmi" or "ulpi"
>   * @connected: true when we're connected to a host, false otherwise
>   * @delayed_status: true when gadget driver asks for delayed status
> @@ -1037,6 +1038,7 @@ struct dwc3_scratchpad_array {
>   *	1	- utmi_l1_suspend_n
>   * @is_fpga: true when we are using the FPGA board
>   * @pending_events: true when we have pending IRQs to be handled
> + * @do_fifo_resize: true when txfifo resizing is enabled for dwc3 endpoints
>   * @pullups_connected: true when Run/Stop bit is set
>   * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
>   * @three_stage_setup: set if we perform a three phase setup
> @@ -1079,6 +1081,11 @@ struct dwc3_scratchpad_array {
>   * @dis_split_quirk: set to disable split boundary.
>   * @imod_interval: set the interrupt moderation interval in 250ns
>   *			increments or 0 to disable.
> + * @max_cfg_eps: current max number of IN eps used across all USB configs.
> + * @last_fifo_depth: last fifo depth used to determine next fifo ram start
> + *		     address.
> + * @num_ep_resized: carries the current number endpoints which have had its tx
> + *		    fifo resized.
>   */
>  struct dwc3 {
>  	struct work_struct	drd_work;
> @@ -1233,6 +1240,7 @@ struct dwc3 {
>  	u8			rx_max_burst_prd;
>  	u8			tx_thr_num_pkt_prd;
>  	u8			tx_max_burst_prd;
> +	u8			tx_fifo_resize_max_num;
>  
>  	const char		*hsphy_interface;
>  
> @@ -1246,6 +1254,7 @@ struct dwc3 {
>  	unsigned		is_utmi_l1_suspend:1;
>  	unsigned		is_fpga:1;
>  	unsigned		pending_events:1;
> +	unsigned		do_fifo_resize:1;
>  	unsigned		pullups_connected:1;
>  	unsigned		setup_packet_pending:1;
>  	unsigned		three_stage_setup:1;
> @@ -1281,6 +1290,10 @@ struct dwc3 {
>  	unsigned		dis_split_quirk:1;
>  
>  	u16			imod_interval;
> +
> +	int			max_cfg_eps;
> +	int			last_fifo_depth;
> +	int			num_ep_resized;
>  };
>  
>  #define INCRX_BURST_MODE 0
> @@ -1512,6 +1525,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
>  		struct dwc3_gadget_ep_cmd_params *params);
>  int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd,
>  		u32 param);
> +void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc);
>  #else
>  static inline int dwc3_gadget_init(struct dwc3 *dwc)
>  { return 0; }
> @@ -1531,6 +1545,8 @@ static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
>  static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
>  		int cmd, u32 param)
>  { return 0; }
> +static inline void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc)
> +{ }
>  #endif
>  
>  #if IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE)
> diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
> index 3cd2942..d28d085 100644
> --- a/drivers/usb/dwc3/ep0.c
> +++ b/drivers/usb/dwc3/ep0.c
> @@ -619,6 +619,8 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
>  		return -EINVAL;
>  
>  	case USB_STATE_ADDRESS:
> +		dwc3_gadget_clear_tx_fifos(dwc);
> +
>  		ret = dwc3_ep0_delegate_req(dwc, ctrl);
>  		/* if the cfg matches and the cfg is non zero */
>  		if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index af6d7f1..e56f1a6 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -632,6 +632,187 @@ static void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force,
>  		bool interrupt);
>  
>  /**
> + * dwc3_gadget_calc_tx_fifo_size - calculates the txfifo size value
> + * @dwc: pointer to the DWC3 context
> + * @nfifos: number of fifos to calculate for
> + *
> + * Calculates the size value based on the equation below:
> + *
> + * DWC3 revision 280A and prior:
> + * fifo_size = mult * (max_packet / mdwidth) + 1;
> + *
> + * DWC3 revision 290A and onwards:
> + * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1
> + *
> + * The max packet size is set to 1024, as the txfifo requirements mainly apply
> + * to super speed USB use cases.  However, it is safe to overestimate the fifo
> + * allocations for other scenarios, i.e. high speed USB.
> + */
> +static int dwc3_gadget_calc_tx_fifo_size(struct dwc3 *dwc, int mult)
> +{
> +	int max_packet = 1024;
> +	int fifo_size;
> +	int mdwidth;
> +
> +	mdwidth = dwc3_mdwidth(dwc);
> +
> +	/* MDWIDTH is represented in bits, we need it in bytes */
> +	mdwidth >>= 3;
> +
> +	if (DWC3_VER_IS_PRIOR(DWC3, 290A))
> +		fifo_size = mult * (max_packet / mdwidth) + 1;
> +	else
> +		fifo_size = mult * ((max_packet + mdwidth) / mdwidth) + 1;
> +	return fifo_size;
> +}
> +
> +/**
> + * dwc3_gadget_clear_tx_fifo_size - Clears txfifo allocation
> + * @dwc: pointer to the DWC3 context
> + *
> + * Iterates through all the endpoint registers and clears the previous txfifo
> + * allocations.
> + */
> +void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc)
> +{
> +	struct dwc3_ep *dep;
> +	int fifo_depth;
> +	int size;
> +	int num;
> +
> +	if (!dwc->do_fifo_resize)
> +		return;
> +
> +	/* Read ep0IN related TXFIFO size */
> +	dep = dwc->eps[1];
> +	size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0));
> +	if (DWC3_IP_IS(DWC3))
> +		fifo_depth = DWC3_GTXFIFOSIZ_TXFDEP(size);
> +	else
> +		fifo_depth = DWC31_GTXFIFOSIZ_TXFDEP(size);
> +
> +	dwc->last_fifo_depth = fifo_depth;
> +	/* Clear existing TXFIFO for all IN eps except ep0 */
> +	for (num = 3; num < min_t(int, dwc->num_eps, DWC3_ENDPOINTS_NUM);
> +	     num += 2) {
> +		dep = dwc->eps[num];
> +		/* Don't change TXFRAMNUM on usb31 version */
> +		size = DWC3_IP_IS(DWC3) ? 0 :
> +			dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1)) &
> +				   DWC31_GTXFIFOSIZ_TXFRAMNUM;
> +
> +		dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num >> 1), size);
> +	}
> +	dwc->num_ep_resized = 0;
> +}
> +
> +/*
> + * dwc3_gadget_resize_tx_fifos - reallocate fifo spaces for current use-case
> + * @dwc: pointer to our context structure
> + *
> + * This function will a best effort FIFO allocation in order
> + * to improve FIFO usage and throughput, while still allowing
> + * us to enable as many endpoints as possible.
> + *
> + * Keep in mind that this operation will be highly dependent
> + * on the configured size for RAM1 - which contains TxFifo -,
> + * the amount of endpoints enabled on coreConsultant tool, and
> + * the width of the Master Bus.
> + *
> + * In general, FIFO depths are represented with the following equation:
> + *
> + * fifo_size = mult * ((max_packet + mdwidth)/mdwidth + 1) + 1
> + *
> + * In conjunction with dwc3_gadget_check_config(), this resizing logic will
> + * ensure that all endpoints will have enough internal memory for one max
> + * packet per endpoint.
> + */
> +static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
> +{
> +	struct dwc3 *dwc = dep->dwc;
> +	int fifo_0_start;
> +	int ram1_depth;
> +	int fifo_size;
> +	int min_depth;
> +	int num_in_ep;
> +	int remaining;
> +	int num_fifos = 1;
> +	int fifo;
> +	int tmp;
> +
> +	if (!dwc->do_fifo_resize)
> +		return 0;
> +
> +	/* resize IN endpoints except ep0 */
> +	if (!usb_endpoint_dir_in(dep->endpoint.desc) || dep->number <= 1)
> +		return 0;

> +
> +	ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
> +
> +	if ((dep->endpoint.maxburst > 1 &&
> +	     usb_endpoint_xfer_bulk(dep->endpoint.desc)) ||
> +	    usb_endpoint_xfer_isoc(dep->endpoint.desc))
> +		num_fifos = 3;
> +
> +	if (dep->endpoint.maxburst > 6 &&
> +	    usb_endpoint_xfer_bulk(dep->endpoint.desc) && DWC3_IP_IS(DWC31))
> +		num_fifos = dwc->tx_fifo_resize_max_num;

Why only bulk? Isoc should be at least equal or more than bulk.
Also, make this applicable to DWC_usb32 also.

> +
> +	/* FIFO size for a single buffer */
> +	fifo = dwc3_gadget_calc_tx_fifo_size(dwc, 1);
> +
> +	/* Calculate the number of remaining EPs w/o any FIFO */
> +	num_in_ep = dwc->max_cfg_eps;
> +	num_in_ep -= dwc->num_ep_resized;

Does this calculation account for multiple alt-setting interfaces?

> +
> +	/* Reserve at least one FIFO for the number of IN EPs */
> +	min_depth = num_in_ep * (fifo + 1);
> +	remaining = ram1_depth - min_depth - dwc->last_fifo_depth;
> +	remaining = max_t(int, 0, remaining);

Add blank line

> +	/*
> +	 * We've already reserved 1 FIFO per EP, so check what we can fit in
> +	 * addition to it.  If there is not enough remaining space, allocate
> +	 * all the remaining space to the EP.
> +	 */
> +	fifo_size = (num_fifos - 1) * fifo;
> +	if (remaining < fifo_size)
> +		fifo_size = remaining;
> +
> +	fifo_size += fifo;
> +	/* Last increment according to the TX FIFO size equation */
> +	fifo_size++;
> +
> +	/* Check if TXFIFOs start at non-zero addr */
> +	tmp = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0));
> +	fifo_0_start = DWC3_GTXFIFOSIZ_TXFSTADDR(tmp);
> +
> +	fifo_size |= (fifo_0_start + (dwc->last_fifo_depth << 16));
> +	if (DWC3_IP_IS(DWC3))
> +		dwc->last_fifo_depth += DWC3_GTXFIFOSIZ_TXFDEP(fifo_size);
> +	else
> +		dwc->last_fifo_depth += DWC31_GTXFIFOSIZ_TXFDEP(fifo_size);
> +
> +	/* Check fifo size allocation doesn't exceed available RAM size. */
> +	if (dwc->last_fifo_depth >= ram1_depth) {
> +		dev_err(dwc->dev, "Fifosize(%d) > RAM size(%d) %s depth:%d\n",
> +			dwc->last_fifo_depth, ram1_depth,
> +			dep->endpoint.name, fifo_size);
> +		if (DWC3_IP_IS(DWC3))
> +			fifo_size = DWC3_GTXFIFOSIZ_TXFDEP(fifo_size);
> +		else
> +			fifo_size = DWC31_GTXFIFOSIZ_TXFDEP(fifo_size);
> +
> +		dwc->last_fifo_depth -= fifo_size;
> +		return -ENOMEM;
> +	}
> +
> +	dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(dep->number >> 1), fifo_size);
> +	dwc->num_ep_resized++;
> +
> +	return 0;
> +}
> +
> +/**
>   * __dwc3_gadget_ep_enable - initializes a hw endpoint
>   * @dep: endpoint to be initialized
>   * @action: one of INIT, MODIFY or RESTORE
> @@ -648,6 +829,10 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, unsigned int action)
>  	int			ret;
>  
>  	if (!(dep->flags & DWC3_EP_ENABLED)) {
> +		ret = dwc3_gadget_resize_tx_fifos(dep);
> +		if (ret)
> +			return ret;
> +
>  		ret = dwc3_gadget_start_config(dep);
>  		if (ret)
>  			return ret;
> @@ -2498,6 +2683,7 @@ static int dwc3_gadget_stop(struct usb_gadget *g)
>  
>  	spin_lock_irqsave(&dwc->lock, flags);
>  	dwc->gadget_driver	= NULL;
> +	dwc->max_cfg_eps = 0;
>  	spin_unlock_irqrestore(&dwc->lock, flags);
>  
>  	free_irq(dwc->irq_gadget, dwc->ev_buf);
> @@ -2585,6 +2771,51 @@ static int dwc3_gadget_vbus_draw(struct usb_gadget *g, unsigned int mA)
>  	return ret;
>  }
>  
> +/**
> + * dwc3_gadget_check_config - ensure dwc3 can support the USB configuration
> + * @g: pointer to the USB gadget
> + *
> + * Used to record the maximum number of endpoints being used in a USB composite
> + * device. (across all configurations)  This is to be used in the calculation
> + * of the TXFIFO sizes when resizing internal memory for individual endpoints.
> + * It will help ensured that the resizing logic reserves enough space for at
> + * least one max packet.
> + */
> +static int dwc3_gadget_check_config(struct usb_gadget *g)
> +{
> +	struct dwc3 *dwc = gadget_to_dwc(g);
> +	struct usb_ep *ep;
> +	int fifo_size = 0;
> +	int ram1_depth;
> +	int ep_num = 0;
> +
> +	if (!dwc->do_fifo_resize)
> +		return 0;
> +
> +	list_for_each_entry(ep, &g->ep_list, ep_list) {
> +		/* Only interested in the IN endpoints */
> +		if (ep->claimed && (ep->address & USB_DIR_IN))
> +			ep_num++;
> +	}
> +
> +	if (ep_num <= dwc->max_cfg_eps)
> +		return 0;
> +
> +	/* Update the max number of eps in the composition */
> +	dwc->max_cfg_eps = ep_num;
> +
> +	fifo_size = dwc3_gadget_calc_tx_fifo_size(dwc, dwc->max_cfg_eps);
> +	/* Based on the equation, increment by one for every ep */
> +	fifo_size += dwc->max_cfg_eps;
> +
> +	/* Check if we can fit a single fifo per endpoint */
> +	ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
> +	if (fifo_size > ram1_depth)
> +		return -ENOMEM;
> +
> +	return 0;
> +}
> +
>  static const struct usb_gadget_ops dwc3_gadget_ops = {
>  	.get_frame		= dwc3_gadget_get_frame,
>  	.wakeup			= dwc3_gadget_wakeup,
> @@ -2596,6 +2827,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = {
>  	.udc_set_ssp_rate	= dwc3_gadget_set_ssp_rate,
>  	.get_config_params	= dwc3_gadget_config_params,
>  	.vbus_draw		= dwc3_gadget_vbus_draw,
> +	.check_config		= dwc3_gadget_check_config,
>  };
>  
>  /* -------------------------------------------------------------------------- */
> 

Btw, I'm a little busy at the moment and can't review all the
calculations in the patch in detail. I'll comment on what I can. Thanks
for the work and the patches.

BR,
Thinh




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux