Am 25.07.2014 10:02, schrieb Michal Simek:
> On 07/25/2014 01:28 AM, Sören Brinkmann wrote:
>> On Fri, 2014-07-25 at 01:00AM +0200, Andreas Färber wrote:
>>> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
>>> ---
>>> v2: New
>>>
>>> arch/arm/boot/dts/zynq-7000.dtsi | 17 +++++++++++++++++
>>> arch/arm/boot/dts/zynq-parallella.dts | 4 ++++
>>> 2 files changed, 21 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
>>> index eed3df0..1a70277 100644
>>> --- a/arch/arm/boot/dts/zynq-7000.dtsi
>>> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
>>> @@ -223,6 +223,23 @@
>>> };
>>> };
>>>
>>> + dmac_s: dmac@f8003000 {
>>> + compatible = "arm,pl330", "arm,primecell";
>>> + reg = <0xf8003000 0x1000>;
>>> + status = "disabled";
>> I think for this IP we can omit the 'status' property since it is always
>> enabled. I don't see a reason to override it in each board DT.
>
> Done this change myself
Fine with me, but allow me to point out that the TRM documents the DMAC
being mapped as DMAC S at the above address, and as DMAC NS at F800_4000
(secure vs. non-secure, ch. 4.6, p. 116). Not sure how this would be
handled driver-wise if not through alternative dt nodes?
>>> + interrupt-parent = <&intc>;
>>> + interrupts = <0 13 4>,
>>> + <0 14 4>, <0 15 4>,
>>> + <0 16 4>, <0 17 4>,
>>> + <0 40 4>, <0 41 4>,
>>> + <0 42 4>, <0 43 4>;
>>> + #dma-cells = <1>;
>>> + #dma-channels = <8>;
>>> + #dma-requests = <4>;
>>> + clocks = <&clkc 27>;
>>> + clock-names = "apb_pclk";
>>> + };
>>> +
>>
>> Acked-by: Soren Brinkmann <soren.brinkmann@xxxxxxxxxx>
>
>
> Applied to zynq/dt branch.
> https://github.com/Xilinx/linux-xlnx/commits/zynq/dt
Thanks,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
Attachment:
signature.asc
Description: OpenPGP digital signature
