Hello, This patch series adds an initial device tree for the Parallella board. UART, SD card, Ethernet are enabled. Not yet enabled are HDMI, QSPI flash and 2x USB. v2 adds some SPI and FPGA pieces and tidies the device tree with a compatible string and matching documentation. Not having all pieces for testing all of this (most notably I'm missing ADI ADV7513 and AXI-HDMI support for VDMA and axi-clkgen, as well as the 25Q128A flash chip for QSPI), I've kept new things in separate patches so that we can make progress on the basic version and possibly squash further cherry-picked pieces. Punnaiah Choudary Kalluri had recently proposed to extend the Chipidea USB driver for Zynq; it kept complaining about the PHY though, and I haven't spotted a revised version based on the generic driver yet. https://patchwork.kernel.org/patch/4434681/ My rebasing work branch is here: https://github.com/afaerber/linux/commits/parallella-next Regards, Andreas Cc: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx> (USB) Cc: Lars-Peter Clausen <lars@xxxxxxxxxx> (HDMI) Andreas Färber (11): Documentation: devicetree: Adapteva vendor prefix Documentation: devicetree: Adapteva boards ARM: dts: zynq: Add Parallella device tree ARM: dts: zynq: Update deprecated xuartps clock names ARM: dts: zynq: Add QSPI for Parallella ARM: dts: zynq: Add DMAC for Parallella Documentation: devicetree: Fix Xilinx VDMA specification ARM: dts: zynq: Add VDMA to Parallella Documentation: devicetree: Fix ADI AXI SPDIF specification ARM: dts: zynq: Add SPDIF for Parallella ARM: dts: zynq: Add AXI clkgen for Parallella Documentation/devicetree/bindings/arm/adapteva.txt | 7 ++ .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 2 +- .../devicetree/bindings/sound/adi,axi-spdif-tx.txt | 2 +- .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 4 +- arch/arm/boot/dts/zynq-7000.dtsi | 58 +++++++++- arch/arm/boot/dts/zynq-parallella.dts | 119 +++++++++++++++++++++ 7 files changed, 188 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/adapteva.txt create mode 100644 arch/arm/boot/dts/zynq-parallella.dts -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
