Switch dispcc and videocc into using MMCX domain directly. Drop the now
unused mmcx regulator.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 11 ++---------
1 file changed, 2 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 4c0de12aaba6..2a468b85dc09 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -271,13 +271,6 @@ memory@80000000 {
reg = <0x0 0x80000000 0x0 0x0>;
};
- mmcx_reg: mmcx-reg {
- compatible = "regulator-fixed-domain";
- power-domains = <&rpmhpd SM8250_MMCX>;
- required-opps = <&rpmhpd_opp_low_svs>;
- regulator-name = "MMCX";
- };
-
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
@@ -2362,7 +2355,7 @@ videocc: clock-controller@abf0000 {
clocks = <&gcc GCC_VIDEO_AHB_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&rpmhcc RPMH_CXO_CLK_A>;
- mmcx-supply = <&mmcx_reg>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
#clock-cells = <1>;
#reset-cells = <1>;
@@ -2627,7 +2620,7 @@ opp-358000000 {
dispcc: clock-controller@af00000 {
compatible = "qcom,sm8250-dispcc";
reg = <0 0x0af00000 0 0x10000>;
- mmcx-supply = <&mmcx_reg>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&dsi0_phy 0>,
<&dsi0_phy 1>,
--
2.30.2
