From: Vamsi krishna Lanka <quic_vamslank@xxxxxxxxxxx>
Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..
This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.
Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@xxxxxxxxxxx>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/qcom-sdx65-mtp.dts | 25 ++++
arch/arm/boot/dts/qcom-sdx65.dtsi | 215 +++++++++++++++++++++++++++
3 files changed, 242 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/qcom-sdx65-mtp.dts
create mode 100644 arch/arm/boot/dts/qcom-sdx65.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 8e5d4ab4e75e..1e3f01496cb3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -929,7 +929,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8974-sony-xperia-castor.dtb \
qcom-msm8974-sony-xperia-honami.dtb \
qcom-mdm9615-wp8548-mangoh-green.dtb \
- qcom-sdx55-mtp.dtb
+ qcom-sdx55-mtp.dtb \
+ qcom-sdx65-mtp.dtb
dtb-$(CONFIG_ARCH_RDA) += \
rda8810pl-orangepi-2g-iot.dtb \
rda8810pl-orangepi-i96.dtb
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
new file mode 100644
index 000000000000..59457da8e5f1
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "qcom-sdx65.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SDX65 MTP";
+ compatible = "qcom,sdx65-mtp", "qcom,sdx65";
+ qcom,board-id = <0x2010008 0x302>;
+
+ aliases {
+ serial0 = &blsp1_uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&blsp1_uart3 {
+ status = "ok";
+};
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
new file mode 100644
index 000000000000..4b5e7248c34d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * SDX65 SoC device tree source
+ *
+ * Copyright (c) 2021 Qualcomm Innovation Center, Inc. All rights reserved.
+ *
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdx65.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ qcom,msm-id = <458 0x10000>, <483 0x10000>, <509 0x10000>;
+ interrupt-parent = <&intc>;
+
+ memory {
+ device_type = "memory";
+ reg = <0 0>;
+ };
+
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ clock-frequency = <76800000>;
+ clock-output-names = "xo_board";
+ #clock-cells = <0>;
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32764>;
+ clock-output-names = "sleep_clk";
+ #clock-cells = <0>;
+ };
+
+ pcie_pipe_clk: pcie-0-pipe-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <1000>;
+ clock-output-names = "pcie_pipe_clk";
+ #clock-cells = <0>;
+ };
+
+ usb3_phy_wrapper_gcc_usb30_pipe_clk: usb3-phy-wrapper-gcc-usb30-pipe-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <1000>;
+ clock-output-names = "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+ #clock-cells = <0>;
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-sdx65";
+ reg = <0x100000 0x1f7400>;
+ reg-name = "cc_base";
+ clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>,
+ <&pcie_pipe_clk>, <&usb3_phy_wrapper_gcc_usb30_pipe_clk>;
+ clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk",
+ "pcie_pipe_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ blsp1_uart3: serial@831000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x00831000 0x200>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ pdc: interrupt-controller@b210000 {
+ compatible = "qcom,sdx65-pdc", "qcom,pdc";
+ reg = <0xb210000 0x10000>;
+ qcom,pdc-ranges = <0 147 52>, <52 266 32>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ intc: interrupt-controller@17800000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ #interrupt-cells = <3>;
+ reg = <0x17800000 0x1000>,
+ <0x17802000 0x1000>;
+ };
+
+ timer@17820000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x17820000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@17821000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 7 0x4>,
+ <GIC_SPI 6 0x4>;
+ reg = <0x17821000 0x1000>,
+ <0x17822000 0x1000>;
+ };
+
+ frame@17823000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 8 0x4>;
+ reg = <0x17823000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17824000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 9 0x4>;
+ reg = <0x17824000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17825000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 10 0x4>;
+ reg = <0x17825000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17826000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 11 0x4>;
+ reg = <0x17826000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17827000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 12 0x4>;
+ reg = <0x17827000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17828000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 13 0x4>;
+ reg = <0x17828000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17829000 {
+ frame-number = <7>;
+ interrupts = <GIC_SPI 14 0x4>;
+ reg = <0x17829000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ apps_rsc: rsc@17830000 {
+ label = "apps_rsc";
+ compatible = "qcom,rpmh-rsc";
+ reg = <0x17830000 0x10000>,
+ <0x17840000 0x10000>;
+ reg-names = "drv-0", "drv-1";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,tcs-offset = <0xd00>;
+ qcom,drv-id = <1>;
+ qcom,tcs-config = <ACTIVE_TCS 2>,
+ <SLEEP_TCS 2>,
+ <WAKE_TCS 2>,
+ <CONTROL_TCS 1>;
+
+ rpmhcc: clock-controller@1 {
+ compatible = "qcom,sdx65-rpmh-clk";
+ #clock-cells = <1>;
+ clock-names = "xo";
+ clocks = <&xo_board>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 12 0xf08>,
+ <1 10 0xf08>,
+ <1 11 0xf08>;
+ clock-frequency = <19200000>;
+ };
+};
--
2.32.0
