Re: [PATCH 1/6] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue 06 Jul 02:23 CDT 2021, Ulf Hansson wrote:

> On Thu, 1 Jul 2021 at 21:26, Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> wrote:
> >
> > On Thu 01 Jul 11:58 CDT 2021, Ulf Hansson wrote:
> >
> > > On Thu, 1 Jul 2021 at 18:39, Dmitry Baryshkov
> > > <dmitry.baryshkov@xxxxxxxxxx> wrote:
> > > >
> > > > On Thu, 1 Jul 2021 at 19:17, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
> > > > >
> > > > > On Wed, 30 Jun 2021 at 15:31, Dmitry Baryshkov
> > > > > <dmitry.baryshkov@xxxxxxxxxx> wrote:
> > > > > >
> > > > > > On sm8250 dispcc requires MMCX power domain to be powered up before
> > > > > > clock controller's registers become available. For now sm8250 was using
> > > > > > external regulator driven by the power domain to describe this
> > > > > > relationship. Switch into specifying power-domain and required opp-state
> > > > > > directly.
> > > > > >
> > > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > > > > > ---
> > > > > >  .../bindings/clock/qcom,dispcc-sm8x50.yaml    | 19 +++++++++++++++++++
> > > > > >  1 file changed, 19 insertions(+)
> > > > > >
> > > > > > diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > > > > index 0cdf53f41f84..48d86fb34fa7 100644
> > > > > > --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > > > > +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > > > > @@ -55,6 +55,16 @@ properties:
> > > > > >    reg:
> > > > > >      maxItems: 1
> > > > > >
> > > > > > +  power-domains:
> > > > > > +    description:
> > > > > > +      A phandle and PM domain specifier for the MMCX power domain.
> > > > > > +    maxItems: 1
> > > > > > +
> > > > >
> > > > > Should you perhaps state that this is a parent domain? Or it isn't?
> > > > >
> > > > > Related to this and because this is a power domain provider, you
> > > > > should probably reference the common power-domain bindings somewhere
> > > > > here. Along the lines of this:
> > > > >
> > > > > - $ref: power-domain.yaml#
> > > > >
> > > > > As an example, you could have a look at
> > > > > Documentation/devicetree/bindings/power/pd-samsung.yaml.
> > > >
> > > > I'll take a look.
> > > >
> > > > >
> > > > > > +  required-opps:
> > > > > > +    description:
> > > > > > +      Performance state to use for MMCX to enable register access.
> > > > > > +    maxItems: 1
> > > > >
> > > > > According to the previous discussions, I was under the assumption that
> > > > > this property belongs to a consumer node rather than in the provider
> > > > > node, no?
> > > >
> > > > It is both a consumer and a provider. It consumes SM8250_MMCX from
> > > > rpmhpd and provides MMSC_GDSC.
> > >
> > > That sounds a bit weird to me.
> > >
> >
> > dispcc is a hardware block powered by MMCX, so it is a consumer of it
> > and needs to control MMCX.
> 
> Right, that sounds reasonable.
> 
> >
> > > In my view and per the common power domain bindings (as pointed to
> > > above): If a power domain provider is a consumer of another power
> > > domain, that per definition means that there is a parent domain
> > > specified.
> > >
> >
> > And in addition to needing MMCX to access the dispcc, the exposed
> > power-domain "MDSS_GDSC" is powered by the same MMCX and as such
> > MDSS_GDSC should be a subdomain of MMCX.
> 
> What do you mean by "exposed"? It sounds like you are saying that
> "MDSS_GDSC" is an artificial power domain, no?
> 
> If that's the case, more exactly, why is it like this?
> 
> My apologies if I bother you with details, but as a maintainer of
> genpd, it is very useful to me to have the complete picture.
> 

The display hardware blocks are powered by the MDSS_GDSC power-domain,
which is a subdomain to the MMCX power domain.

MDSS_GDSC is controlled by registers in the display clock controller
block, which is also powered by the MMCX power domain.

Lastly the MMCX power domain is controlled through the RPMh, using the
rpmhpd driver.



As such, specifying MMCX as the power-domain for the dispcc block and
making the dispcc driver use that same power-domain as parent for the
MDSS_GDSC seems to accurately depict these relationships.

Regards,
Bjorn

> >
> >
> > But what I was trying to say yesterday is that the power-domain property
> > should be sufficient and that we shouldn't need to drive MMCX to a
> > particular performance_state in order to access the registers.
> >
> > Then as clients make votes on clock rates that requires higher
> > performance_state, they would describe this in their opp-tables etc.
> >
> >
> > But without any performance_state requests, pd->corner will in
> > rpmhpd_power_on() be 0 and as such powering on the power-domain won't
> > actually do anything. Similarly dev_pm_genpd_set_performance_state(dev,
> > 0) on an active power-domain from rpmhpd will turn it off.
> 
> Yes, I noticed the patches you posted. Thanks for helping out here!
> 
> >
> >
> > So the reason why Dmitry is adding the required-opps to the binding is
> > to get rpmhpd to actually tell the hardware to turn on the power domain.
> > And I don't think this is in accordance with the framework's
> > expectations.
> 
> I agree!
> 
> >
> > Regards,
> > Bjorn
> 
> Kind regards
> Uffe



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux