HI, Enric:
Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> 於 2021年6月30日 週三 下午10:47寫道：
>
> Reset the DSI hardware is needed to prevent different settings between
> the bootloader and the kernel.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> ---
>
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 2 ++
> include/dt-bindings/reset/mt8173-resets.h | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index e5596fe01a1d..36c3998eb7f1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -1036,6 +1036,7 @@ mmsys: syscon@14000000 {
> assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
> assigned-clock-rates = <400000000>;
> #clock-cells = <1>;
> + #reset-cells = <1>;
> mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
> <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
> mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
> @@ -1262,6 +1263,7 @@ dsi0: dsi@1401b000 {
> <&mmsys CLK_MM_DSI0_DIGITAL>,
> <&mipi_tx0>;
> clock-names = "engine", "digital", "hs";
> + resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
Add this in binding document. It would be good if the binding document
is in yaml format.
Regards,
Chun-Kuang.
> phys = <&mipi_tx0>;
> phy-names = "dphy";
> status = "disabled";
> diff --git a/include/dt-bindings/reset/mt8173-resets.h b/include/dt-bindings/reset/mt8173-resets.h
> index ba8636eda5ae..6a60c7cecc4c 100644
> --- a/include/dt-bindings/reset/mt8173-resets.h
> +++ b/include/dt-bindings/reset/mt8173-resets.h
> @@ -27,6 +27,8 @@
> #define MT8173_INFRA_GCE_FAXI_RST 40
> #define MT8173_INFRA_MMIOMMURST 47
>
> +/* MMSYS resets */
> +#define MT8173_MMSYS_SW0_RST_B_DISP_DSI0 25
>
> /* PERICFG resets */
> #define MT8173_PERI_UART0_SW_RST 0
> --
> 2.30.2
>
