Reset the DSI hardware is needed to prevent different settings between
the bootloader and the kernel.
While here, also remove the undocumented and also not used
'mediatek,syscon-dsi' property.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 3 ++-
include/dt-bindings/reset/mt8183-resets.h | 3 +++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 085e2c96b5f4..2d02365633c3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1286,6 +1286,7 @@ mmsys: syscon@14000000 {
compatible = "mediatek,mt8183-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
<&gce 1 CMDQ_THR_PRIO_HIGHEST>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
@@ -1400,11 +1401,11 @@ dsi0: dsi@14014000 {
reg = <0 0x14014000 0 0x1000>;
interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
- mediatek,syscon-dsi = <&mmsys 0x140>;
clocks = <&mmsys CLK_MM_DSI0_MM>,
<&mmsys CLK_MM_DSI0_IF>,
<&mipi_tx0>;
clock-names = "engine", "digital", "hs";
+ resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
phys = <&mipi_tx0>;
phy-names = "dphy";
};
diff --git a/include/dt-bindings/reset/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
index a1bbd41e0d12..48c5d2de0a38 100644
--- a/include/dt-bindings/reset/mt8183-resets.h
+++ b/include/dt-bindings/reset/mt8183-resets.h
@@ -80,6 +80,9 @@
#define MT8183_INFRACFG_SW_RST_NUM 128
+/* MMSYS resets */
+#define MT8183_MMSYS_SW0_RST_B_DISP_DSI0 25
+
#define MT8183_TOPRGU_MM_SW_RST 1
#define MT8183_TOPRGU_MFG_SW_RST 2
#define MT8183_TOPRGU_VENC_SW_RST 3
--
2.30.2
