Re: [PATCH 1/2] Added dts defintion for Lenovo ix4-300d nas

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Andrew I've taken your comment into account, yet for the PHY init comment, see my answer below.

Le 23 juil. 2014 à 16:14, Andrew Lunn <andrew@xxxxxxx> a écrit :
> 
>>> +	/* warning: you need both eth1 & 0 to be initialize for poweroff to shutdown otherwise it reboots */
> 
> What do you mean by initialized? Driver loaded? Interface up? 
Well actually the PHY need to be initialized (at least 1 mII reg written), which from marvel LSP driver always occurs, while it doesn't with mainline PHY driver (drivers/net/phy/marvell.c), so the only simple way I found to have at least one PHY reg on both interface written is to have both eth up at OS config level.

Probably the best option would be to have a reg-init = <reg offset value> on both phy dts definition but the current armada mii doesn't support this dts config...

> 
>> This is a great first version
> 
> I agree with Jason, well done.
> 
Thanks !
>  Andrew

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux