Re: [PATCH v2] dt-bindings: spi: omap-spi: Convert to json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On 19/06/21 2:15 am, Rob Herring wrote:
> On Tue, Jun 08, 2021 at 10:50:09AM +0530, Aswath Govindraju wrote:
>> Convert omap-spi dt-binding documentation from txt to yaml format.
>>
>> Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx>
>> ---
>>
>> changes since v1:
>> - split the series according to their respective trees
>>
>> link to v1:
>> https://lore.kernel.org/patchwork/project/lkml/list/?series=502255
>>
>>  .../devicetree/bindings/spi/omap-spi.txt      |  48 -------
>>  .../devicetree/bindings/spi/omap-spi.yaml     | 126 ++++++++++++++++++
>>  2 files changed, 126 insertions(+), 48 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/spi/omap-spi.txt
>>  create mode 100644 Documentation/devicetree/bindings/spi/omap-spi.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt
>> deleted file mode 100644
>> index 487208c256c0..000000000000
>> --- a/Documentation/devicetree/bindings/spi/omap-spi.txt
>> +++ /dev/null
>> @@ -1,48 +0,0 @@
>> -OMAP2+ McSPI device
>> -
>> -Required properties:
>> -- compatible :
>> -  - "ti,am654-mcspi" for AM654.
>> -  - "ti,omap2-mcspi" for OMAP2 & OMAP3.
>> -  - "ti,omap4-mcspi" for OMAP4+.
>> -- ti,spi-num-cs : Number of chipselect supported  by the instance.
>> -- ti,hwmods: Name of the hwmod associated to the McSPI
>> -- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as
>> -			  input. The default is D0 as input and
>> -			  D1 as output.
>> -
>> -Optional properties:
>> -- dmas: List of DMA specifiers with the controller specific format
>> -	as described in the generic DMA client binding. A tx and rx
>> -	specifier is required for each chip select.
>> -- dma-names: List of DMA request names. These strings correspond
>> -	1:1 with the DMA specifiers listed in dmas. The string naming
>> -	is to be "rxN" and "txN" for RX and TX requests,
>> -	respectively, where N equals the chip select number.
>> -
>> -Examples:
>> -
>> -[hwmod populated DMA resources]
>> -
>> -mcspi1: mcspi@1 {
>> -    #address-cells = <1>;
>> -    #size-cells = <0>;
>> -    compatible = "ti,omap4-mcspi";
>> -    ti,hwmods = "mcspi1";
>> -    ti,spi-num-cs = <4>;
>> -};
>> -
>> -[generic DMA request binding]
>> -
>> -mcspi1: mcspi@1 {
>> -    #address-cells = <1>;
>> -    #size-cells = <0>;
>> -    compatible = "ti,omap4-mcspi";
>> -    ti,hwmods = "mcspi1";
>> -    ti,spi-num-cs = <2>;
>> -    dmas = <&edma 42
>> -	    &edma 43
>> -	    &edma 44
>> -	    &edma 45>;
>> -    dma-names = "tx0", "rx0", "tx1", "rx1";
>> -};
>> diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml
>> new file mode 100644
>> index 000000000000..cd20704f2edc
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml
>> @@ -0,0 +1,126 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/spi/omap-spi.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: SPI controller bindings for OMAP and K3 SoCs
>> +
>> +maintainers:
>> +  - Mark Brown <broonie@xxxxxxxxxx>
> 
> A TI person here please.
> 

Added myself as the reviewer in v3.

Thank you for the review and comments. I have posted a respin(v3) of
this patch after addressing all the comments.

Thanks,
Aswath

> You need a ref to spi-controller.yaml
> 
>> +
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - items:
>> +          - enum:
>> +              - ti,am654-mcspi
>> +              - ti,am4372-mcspi
>> +          - const: ti,omap4-mcspi
>> +      - items:
>> +          - enum:
>> +              - ti,omap2-mcspi
>> +              - ti,omap4-mcspi
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
> 
>> +  '#address-cells':
>> +    const: 1
>> +
>> +  '#size-cells':
>> +    const: 0
> 
> Don't need these, covered by spi-controller.yaml.
> 
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +  ti,spi-num-cs:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: Number of chipselect supported  by the instance.
>> +    minimum: 1
>> +    maximum: 4
>> +
>> +  ti,hwmods:
>> +    $ref: /schemas/types.yaml#/definitions/string
>> +    description:
>> +      Must be "mcspi<n>", n being the instance number (1-based).
>> +      This property is applicable only on legacy platforms mainly omap2/3
>> +      and ti81xx and should not be used on other platforms.
>> +    deprecated: true
>> +
>> +  ti,pindir-d0-out-d1-in:
>> +    description:
>> +      Select the D0 pin as output and D1 as input. The default is D0
>> +      as input and D1 as output.
>> +    type: boolean
>> +
>> +  dmas:
>> +    description:
>> +      List of DMA specifiers with the controller specific format as
>> +      described in the generic DMA client binding. A tx and rx
>> +      specifier is required for each chip select.
>> +    minItems: 1
>> +    maxItems: 8
>> +
>> +  dma-names:
>> +    description:
>> +      List of DMA request names. These strings correspond 1:1 with
>> +      the DMA sepecifiers listed in dmas. The string names is to be
>> +      "rxN" and "txN" for RX and TX requests, respectively. Where N
>> +      is the chip select number.
>> +    minItems: 1
>> +    maxItems: 8
>> +
>> +patternProperties:
>> +  "@[0-9a-f]+$":
>> +    type: object
>> +    description:
>> +      Flash devices are defined as a sub-node of the spi controller
> 
> Covered by spi-controller.yaml.
> 
>> +
>> +required:
>> +  - compatible
>> +  - reg
>> +  - interrupts
>> +
>> +additionalProperties: false
>> +
>> +if:
>> +  properties:
>> +    compatible:
>> +      oneOf:
>> +        - const: ti,omap2-mcspi
>> +        - const: ti,omap4-mcspi
>> +
>> +then:
>> +  properties:
>> +    ti,hwmods:
>> +      items:
>> +        - pattern: "^mcspi([1-9])$"
>> +
>> +else:
>> +  properties:
>> +    ti,hwmods: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    #include <dt-bindings/soc/ti,sci_pm_domain.h>
>> +
>> +    main_spi0: spi@2100000 {
> 
> Drop unused labels.
> 
>> +      compatible = "ti,am654-mcspi","ti,omap4-mcspi";
>> +      reg = <0x2100000 0x400>;
>> +      interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
>> +      clocks = <&k3_clks 137 1>;
>> +      power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +      dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
>> +      dma-names = "tx0", "rx0";
>> +    };
>> -- 
>> 2.17.1
>>
>>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux