Convert omap-spi dt-binding documentation from txt to yaml format. Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> --- changes since v2: - added myself as the maintainer - added reference to spi-controller.yaml - removed properties already defined in spi-controller.yaml - removed unused labels in dt example - changed additionalProperties to unevaluatedProperties as a reference is used changes since v1: - split the series according to their respective trees link to v1: https://lore.kernel.org/patchwork/project/lkml/list/?series=502255 .../devicetree/bindings/spi/omap-spi.txt | 48 ------- .../devicetree/bindings/spi/omap-spi.yaml | 117 ++++++++++++++++++ 2 files changed, 117 insertions(+), 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/omap-spi.txt create mode 100644 Documentation/devicetree/bindings/spi/omap-spi.yaml diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt deleted file mode 100644 index 487208c256c0..000000000000 --- a/Documentation/devicetree/bindings/spi/omap-spi.txt +++ /dev/null @@ -1,48 +0,0 @@ -OMAP2+ McSPI device - -Required properties: -- compatible : - - "ti,am654-mcspi" for AM654. - - "ti,omap2-mcspi" for OMAP2 & OMAP3. - - "ti,omap4-mcspi" for OMAP4+. -- ti,spi-num-cs : Number of chipselect supported by the instance. -- ti,hwmods: Name of the hwmod associated to the McSPI -- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as - input. The default is D0 as input and - D1 as output. - -Optional properties: -- dmas: List of DMA specifiers with the controller specific format - as described in the generic DMA client binding. A tx and rx - specifier is required for each chip select. -- dma-names: List of DMA request names. These strings correspond - 1:1 with the DMA specifiers listed in dmas. The string naming - is to be "rxN" and "txN" for RX and TX requests, - respectively, where N equals the chip select number. - -Examples: - -[hwmod populated DMA resources] - -mcspi1: mcspi@1 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,omap4-mcspi"; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; -}; - -[generic DMA request binding] - -mcspi1: mcspi@1 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,omap4-mcspi"; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <2>; - dmas = <&edma 42 - &edma 43 - &edma 44 - &edma 45>; - dma-names = "tx0", "rx0", "tx1", "rx1"; -}; diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml new file mode 100644 index 000000000000..e55538186cf6 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/omap-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI controller bindings for OMAP and K3 SoCs + +maintainers: + - Aswath Govindraju <a-govindraju@xxxxxx> + +allOf: + - $ref: spi-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,am654-mcspi + - ti,am4372-mcspi + - const: ti,omap4-mcspi + - items: + - enum: + - ti,omap2-mcspi + - ti,omap4-mcspi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + ti,spi-num-cs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of chipselect supported by the instance. + minimum: 1 + maximum: 4 + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + description: + Must be "mcspi<n>", n being the instance number (1-based). + This property is applicable only on legacy platforms mainly omap2/3 + and ti81xx and should not be used on other platforms. + deprecated: true + + ti,pindir-d0-out-d1-in: + description: + Select the D0 pin as output and D1 as input. The default is D0 + as input and D1 as output. + type: boolean + + dmas: + description: + List of DMA specifiers with the controller specific format as + described in the generic DMA client binding. A tx and rx + specifier is required for each chip select. + minItems: 1 + maxItems: 8 + + dma-names: + description: + List of DMA request names. These strings correspond 1:1 with + the DMA sepecifiers listed in dmas. The string names is to be + "rxN" and "txN" for RX and TX requests, respectively. Where N + is the chip select number. + minItems: 1 + maxItems: 8 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +if: + properties: + compatible: + oneOf: + - const: ti,omap2-mcspi + - const: ti,omap4-mcspi + +then: + properties: + ti,hwmods: + items: + - pattern: "^mcspi([1-9])$" + +else: + properties: + ti,hwmods: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x2100000 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 137 1>; + power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>; + dma-names = "tx0", "rx0"; + }; -- 2.17.1
