Re: [PATCH 03/14] pinctrl: renesas: Fix pin control matching on R-Car H3e-2G

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

Thank you for the patch.

On Thu, Jun 10, 2021 at 11:37:16AM +0200, Geert Uytterhoeven wrote:
> As R-Car H3 ES1.x (R8A77950) and R-Car ES2.0+ (R8A77951) use the same
> compatible value, the pin control driver relies on soc_device_match()
> with soc_id = "r8a7795" and the (non)matching of revision = "ES1.*" to
> match with and distinguish between the two SoC variants.  The
> corresponding entries in the normal of_match_table are present only to
> make the optional sanity checks work.
> 
> The R-Car H3e-2G (R8A779M1) SoC is a different grading of the R-Car H3
> ES3.0 (R8A77951) SoC.  It uses the same compatible values for individual
> devices, but has an additional compatible value for the root node.
> When running on an R-Car H3e-2G SoC, soc_device_match() with soc_id =
> "r8a7795" does not return a match.  Hence the pin control driver falls
> back to the normal of_match_table, and, as the R8A77950 entry is listed
> first, incorrectly uses the sub-driver for R-Car H3 ES1.x.
> 
> Fix this by moving the entry for R8A77951 before the entry for R8A77950.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

I wonder if this means we could drop the second entry in the quirks
array, in sh_pfc_quirk_match().

> ---
>  drivers/pinctrl/renesas/core.c | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pinctrl/renesas/core.c b/drivers/pinctrl/renesas/core.c
> index 5ccc49b387f17eb9..9adb97065704270d 100644
> --- a/drivers/pinctrl/renesas/core.c
> +++ b/drivers/pinctrl/renesas/core.c
> @@ -571,17 +571,21 @@ static const struct of_device_id sh_pfc_of_table[] = {
>  		.data = &r8a7794_pinmux_info,
>  	},
>  #endif
> -/* Both r8a7795 entries must be present to make sanity checks work */
> -#ifdef CONFIG_PINCTRL_PFC_R8A77950
> +/*
> + * Both r8a7795 entries must be present to make sanity checks work, but only
> + * the first entry is actually used, for R-Car H3e.
> + * R-Car H3 ES1.x and ES2.0+ are matched using soc_device_match() instead.
> + */
> +#ifdef CONFIG_PINCTRL_PFC_R8A77951
>  	{
>  		.compatible = "renesas,pfc-r8a7795",
> -		.data = &r8a77950_pinmux_info,
> +		.data = &r8a77951_pinmux_info,
>  	},
>  #endif
> -#ifdef CONFIG_PINCTRL_PFC_R8A77951
> +#ifdef CONFIG_PINCTRL_PFC_R8A77950
>  	{
>  		.compatible = "renesas,pfc-r8a7795",
> -		.data = &r8a77951_pinmux_info,
> +		.data = &r8a77950_pinmux_info,
>  	},
>  #endif
>  #ifdef CONFIG_PINCTRL_PFC_R8A77960

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux