From: Chris Morgan <macromorgan@xxxxxxxxxxx> Add rotation property for Odroid Go Advance panel to note that it is rotated 270 degrees. Rotation affects DRM connector after this patch: https://cgit.freedesktop.org/drm/drm/commit/drivers/gpu/drm/panel/panel-elida-kd35t133.c?id=610d9c311b1387f8c4ac602fee1f2a1cb0508707 Note: following example of motorola-mapphone-common and tegra30-asus-nexus7-grouper-common where rotation is specified by itself with other physical properties (which are already hard-coded into the driver in this case so not necessary). Please advise if this is not the correct manner in the devicetree to specify this. Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 49c97f76df77..32d7b8270649 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -241,6 +241,8 @@ panel@0 { reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; vdd-supply = <&vcc_lcd>; + rotation = <270>; + port { mipi_in_panel: endpoint { remote-endpoint = <&mipi_out_panel>; -- 2.25.1
