On Sat 12 Jun 15:54 CDT 2021, Caleb Connolly wrote:
> Add bindings for Qualcomm QPNP haptics, setting default values used on
> most devices.
>
> Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/pmi8998.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> index d230c510d4b7..ccf64c1898d4 100644
> --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
> @@ -1,4 +1,5 @@
> // SPDX-License-Identifier: GPL-2.0
> +#include <dt-bindings/input/qcom,qpnp-haptics.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/spmi/spmi.h>
>
> @@ -41,5 +42,20 @@ lab: lab {
> interrupt-names = "sc-err", "ocp";
> };
> };
> +
> + qpnp_haptics: qcom,haptics@c000 {
No qcom, in node name, please.
> + compatible = "qcom,qpnp-haptics";
> + reg = <0xc000 0x100>;
#size-cells is <0>, so this means 2 addresses. Please drop the "length".
Regards,
Bjorn
> +
> + interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
> + <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
> + interrupt-names = "short", "play";
> +
> + qcom,wave-shape = <HAP_WAVE_SINE>;
> + qcom,play-mode = <HAP_PLAY_BUFFER>;
> + qcom,brake-pattern = <0x3 0x3 0x2 0x1>;
> +
> + status = "disabled";
> + };
> };
> };
> --
> 2.31.1
>
>
