Add bindings for Qualcomm QPNP haptics, setting default values used on
most devices.
Signed-off-by: Caleb Connolly <caleb@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pmi8998.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index d230c510d4b7..ccf64c1898d4 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -1,4 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/input/qcom,qpnp-haptics.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
@@ -41,5 +42,20 @@ lab: lab {
interrupt-names = "sc-err", "ocp";
};
};
+
+ qpnp_haptics: qcom,haptics@c000 {
+ compatible = "qcom,qpnp-haptics";
+ reg = <0xc000 0x100>;
+
+ interrupts = <0x3 0xc0 0x0 IRQ_TYPE_EDGE_BOTH>,
+ <0x3 0xc0 0x1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "short", "play";
+
+ qcom,wave-shape = <HAP_WAVE_SINE>;
+ qcom,play-mode = <HAP_PLAY_BUFFER>;
+ qcom,brake-pattern = <0x3 0x3 0x2 0x1>;
+
+ status = "disabled";
+ };
};
};
--
2.31.1
