Re: [PATCH v2 2/3] PCI: dwc: Add Qualcomm PCIe Endpoint controller driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 09 Jun 03:51 CDT 2021, Manivannan Sadhasivam wrote:
> On Sat, Jun 05, 2021 at 10:07:15PM -0500, Bjorn Andersson wrote:
> > On Thu 03 Jun 05:38 CDT 2021, Manivannan Sadhasivam wrote:
> > > diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
[..]
> > > +static irqreturn_t qcom_pcie_ep_perst_threaded_irq(int irq, void *data)
> > > +{
> > > +	struct qcom_pcie_ep *pcie_ep = data;
> > > +	struct dw_pcie *pci = &pcie_ep->pci;
> > > +	struct device *dev = pci->dev;
> > > +	u32 perst;
> > > +
> > > +	perst = gpiod_get_value(pcie_ep->reset);
> > > +
> > > +	if (perst) {
> > > +		/* Start link training */
> > > +		dev_info(dev, "PERST de-asserted by host. Starting link training!\n");
> > > +		qcom_pcie_establish_link(pci);
> > > +	} else {
> > > +		/* Shutdown the link if the link is already on */
> > > +		dev_info(dev, "PERST asserted by host. Shutting down the PCIe link!\n");
> > > +		qcom_pcie_disable_link(pci);
> > > +	}
> > > +
> > > +	/* Set trigger type based on the next expected value of perst gpio */
> > > +	irq_set_irq_type(gpiod_to_irq(pcie_ep->reset),
> > > +			 (perst ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH));
> > 
> > Looks like you're manually implementing edge triggering, is there any
> > reason for that? EDGE_BOTH seems to do the same thing...
> > 
> 
> PERST is a level based signal, so I don't think we can use EDGE_BOTH here.
> 

Afaict it's just a gpio and you define if the hardware should fire of
interrupts given its level or if it should detect transitions.

That said, if the gpio is already high when registering the irq handler
there's no transition.

> > > +
> > > +	return IRQ_HANDLED;
> > > +}
[..]
> > > +static struct platform_driver qcom_pcie_ep_driver = {
> > > +	.probe	= qcom_pcie_ep_probe,
> > > +	.driver	= {
> > > +		.name		= "qcom-pcie-ep",
> > 
> > Skip the indentation of the '='.
> > 
> > > +		.suppress_bind_attrs = true,
> > 
> > Why do we suppress_bind_attrs?
> > 
> 
> This driver doesn't support remove() callback and I don't think it is necessary
> for this platform driver. So this flag is here to prevent unbind from sysfs.
> 

Right, that part makes sense. But do you know why this is, why it's not
possible to have the PCI controller built as a module? (GKI should
want this).

Regards,
Bjorn



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux