Hi All, This patch series adds support for RZ/G2{L,LC} SoC identification. SoC identification register is part of SYSC block and currently no driver is added for SYSC block so just the basic properties are added in binding documentation (and will updated with the required properties once the driver is in place) and this node is used in renesas-soc.c for SoC identification. Patches are based on top of [1] master branch and is dependent on patch series [2]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/ [2] https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=497355 Changes for v2: * Added description for multiple interrupts in SYSC binding doc * Added interrupt-names property in SYSC binding doc * Update dtsi to included interrupt-names property for SYSC node * Mapped entire SYSC block to read the device id * Included RB tag for patch 1, 3 Cheers, Prabhakar Lad Prabhakar (3): dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's arm64: dts: renesas: r9a07g044: Add SYSC node to RZ/G2L SoC DTSI .../bindings/power/renesas,rzg2l-sysc.yaml | 63 +++++++++++++++++++ arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 12 ++++ drivers/soc/renesas/renesas-soc.c | 33 +++++++++- 3 files changed, 107 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml -- 2.17.1