Re: [PATCH RESEND] input: zforce: add regulator handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Jul 21, 2014 at 05:20:11PM +0200, Heiko Stübner wrote:
> From: Heiko Stuebner <heiko.stuebner@xxxxxx>
> 
> It's possible that the controller has an individually switchable power supply.
> Therefore add support to control a supplying regulator.
> 
> As this is not always the case, the regulator is requested as optional.
> 
> Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxx>

Applied (with minimal edits to avoid repeated IS_ERR/PTR_ERR), thank
you.

> ---
>  .../bindings/input/touchscreen/zforce_ts.txt       |  4 +++
>  drivers/input/touchscreen/zforce_ts.c              | 30 ++++++++++++++++++++++
>  2 files changed, 34 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
> index 2faf1f1..80c37df 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
> @@ -9,6 +9,9 @@ Required properties:
>  - x-size: horizontal resolution of touchscreen
>  - y-size: vertical resolution of touchscreen
>  
> +Optional properties:
> +- vdd-supply: Regulator controlling the controller supply
> +
>  Example:
>  
>  	i2c@00000000 {
> @@ -18,6 +21,7 @@ Example:
>  			compatible = "neonode,zforce";
>  			reg = <0x50>;
>  			interrupts = <2 0>;
> +			vdd-supply = <&reg_zforce_vdd>;
>  
>  			gpios = <&gpio5 6 0>, /* INT */
>  				<&gpio5 9 0>; /* RST */
> diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c
> index 01d30ce..39ca962 100644
> --- a/drivers/input/touchscreen/zforce_ts.c
> +++ b/drivers/input/touchscreen/zforce_ts.c
> @@ -29,6 +29,8 @@
>  #include <linux/sysfs.h>
>  #include <linux/input/mt.h>
>  #include <linux/platform_data/zforce_ts.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/delay.h>
>  #include <linux/of.h>
>  #include <linux/of_gpio.h>
>  
> @@ -117,6 +119,8 @@ struct zforce_ts {
>  	const struct zforce_ts_platdata *pdata;
>  	char			phys[32];
>  
> +	struct regulator	*reg_vdd;
> +
>  	bool			suspending;
>  	bool			suspended;
>  	bool			boot_complete;
> @@ -690,6 +694,11 @@ static void zforce_reset(void *data)
>  	struct zforce_ts *ts = data;
>  
>  	gpio_set_value(ts->pdata->gpio_rst, 0);
> +
> +	udelay(10);
> +
> +	if (!IS_ERR(ts->reg_vdd))
> +		regulator_disable(ts->reg_vdd);
>  }
>  
>  static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev)
> @@ -765,10 +774,31 @@ static int zforce_probe(struct i2c_client *client,
>  		return ret;
>  	}
>  
> +	ts->reg_vdd = devm_regulator_get_optional(&client->dev, "vdd");
> +	if (IS_ERR(ts->reg_vdd) && PTR_ERR(ts->reg_vdd) == -EPROBE_DEFER)
> +		return PTR_ERR(ts->reg_vdd);
> +
> +	if (!IS_ERR(ts->reg_vdd)) {
> +		ret = regulator_enable(ts->reg_vdd);
> +		if (ret)
> +			return ret;
> +
> +		/*
> +		 * according to datasheet add 100us grace time after regular
> +		 * regulator enable delay.
> +		 */
> +		udelay(100);
> +	}
> +
>  	ret = devm_add_action(&client->dev, zforce_reset, ts);
>  	if (ret) {
>  		dev_err(&client->dev, "failed to register reset action, %d\n",
>  			ret);
> +
> +		/* hereafter the regulator will be disabled by the action */
> +		if (!IS_ERR(ts->reg_vdd))
> +			regulator_disable(ts->reg_vdd);
> +
>  		return ret;
>  	}
>  
> -- 
> 1.9.0
> 

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux