Hi Nishanth, On 07/06/21 6:58 pm, Nishanth Menon wrote: > On 22:13-20210604, Aswath Govindraju wrote: >> Due to a limitation for USB DFU boot mode, SPL load address has to be less >> than or equal to 0x70001000. So, load address of SPL and ATF have been >> moved to 0x70000000 and 0x701a0000 respectively. >> >> Also, the maximum size of ATF has been increased to 0x1c000 [1]. >> >> Therefore, update ATF's location and maximum size accordingly in the device >> tree file. >> >> [1] - https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/commit/?id=2fb5312f61a7de8b7a70e1639199c4f14a10b6f9 >> >> Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx> >> --- >> >> Link to corresponding U-Boot series that makes the ATF load address update, >> - https://patchwork.ozlabs.org/project/uboot/list/?series=247265 >> >> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi >> index ca59d1f711f8..7ae28992097f 100644 >> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi >> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi >> @@ -14,7 +14,7 @@ >> ranges = <0x0 0x00 0x70000000 0x200000>; >> >> atf-sram@0 { > @0 should be @1a0000 ? Sorry, forgot to make this change. Will correct this in the respin. Thanks, Aswath >> - reg = <0x0 0x1a000>; >> + reg = <0x1a0000 0x1c000>; >> }; >> }; >> >> -- >> 2.17.1 >> >
