Hi Oleh, Great work; one last style-related comment but everything else looks good to me. On Fri, Jun 04, 2021 at 01:18:03AM +0300, Oleh Kravchenko wrote: > A simple analog joystick built on Low Power ATtiny85 Microcontroller. > Directional movements are measured with two 10 kΩ potentiometers > connected with a gimbal mechanism that separates the horizontal and > vertical movements. This joystick also has a select button that is actuated > when the joystick is pressed down. > > Input events polled over the I2C bus. > > Product page: > https://www.sparkfun.com/products/15168 > Firmware and hardware sources: > https://github.com/sparkfun/Qwiic_Joystick > > Tested on RPi4B and O4-iMX-NANO boards. > > Cc: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx> > Cc: Device Tree mailing list <devicetree@xxxxxxxxxxxxxxx> > Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> > Cc: Jeff LaBundy <jeff@xxxxxxxxxxx> > Cc: Jiri Kosina <jikos@xxxxxxxx> > Cc: Patchwork Bot <patchwork-bot@xxxxxxxxxx> > Cc: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Oleh Kravchenko <oleg@xxxxxxxxxx> > --- > > Changes for v3: > - update patch after code review. > > Changes for v2: > - update code after code review > > drivers/input/joystick/Kconfig | 9 ++ > drivers/input/joystick/Makefile | 1 + > drivers/input/joystick/qwiic-joystick.c | 147 ++++++++++++++++++++++++ > 3 files changed, 157 insertions(+) > create mode 100644 drivers/input/joystick/qwiic-joystick.c > > diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig > index 5e38899058c1..7dfe8ea90923 100644 > --- a/drivers/input/joystick/Kconfig > +++ b/drivers/input/joystick/Kconfig > @@ -372,6 +372,15 @@ config JOYSTICK_PXRC > To compile this driver as a module, choose M here: the > module will be called pxrc. > > +config JOYSTICK_QWIIC > + tristate "SparkFun Qwiic Joystick" > + depends on I2C > + help > + Say Y here if you want to use the SparkFun Qwiic Joystick. > + > + To compile this driver as a module, choose M here: the > + module will be called qwiic-joystick. > + > config JOYSTICK_FSIA6B > tristate "FlySky FS-iA6B RC Receiver" > select SERIO > diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile > index 31d720c9e493..5174b8aba2dd 100644 > --- a/drivers/input/joystick/Makefile > +++ b/drivers/input/joystick/Makefile > @@ -27,6 +27,7 @@ obj-$(CONFIG_JOYSTICK_MAPLE) += maplecontrol.o > obj-$(CONFIG_JOYSTICK_N64) += n64joy.o > obj-$(CONFIG_JOYSTICK_PSXPAD_SPI) += psxpad-spi.o > obj-$(CONFIG_JOYSTICK_PXRC) += pxrc.o > +obj-$(CONFIG_JOYSTICK_QWIIC) += qwiic-joystick.o > obj-$(CONFIG_JOYSTICK_SIDEWINDER) += sidewinder.o > obj-$(CONFIG_JOYSTICK_SPACEBALL) += spaceball.o > obj-$(CONFIG_JOYSTICK_SPACEORB) += spaceorb.o > diff --git a/drivers/input/joystick/qwiic-joystick.c b/drivers/input/joystick/qwiic-joystick.c > new file mode 100644 > index 000000000000..d1748ca38de2 > --- /dev/null > +++ b/drivers/input/joystick/qwiic-joystick.c > @@ -0,0 +1,147 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2021 Oleh Kravchenko <oleg@xxxxxxxxxx> > + * > + * SparkFun Qwiic Joystick > + * Product page:https://www.sparkfun.com/products/15168 > + * Firmware and hardware sources:https://github.com/sparkfun/Qwiic_Joystick > + */ > + > +#include <linux/kernel.h> > +#include <linux/bits.h> > +#include <linux/i2c.h> > +#include <linux/input.h> > +#include <linux/module.h> Nit: in general these should be alphabetized. > + > +#define DRV_NAME "qwiic-joystick" > + > +#define QWIIC_JSK_REG_VERS 1 > +#define QWIIC_JSK_REG_DATA 3 > + > +#define QWIIC_JSK_MAX_AXIS GENMASK(9, 0) > +#define QWIIC_JSK_FUZZ 2 > +#define QWIIC_JSK_FLAT 2 > +#define QWIIC_JSK_POLL_INTERVAL 16 > +#define QWIIC_JSK_POLL_MIN 8 > +#define QWIIC_JSK_POLL_MAX 32 > + > +struct qwiic_jsk { > + char phys[32]; > + struct input_dev *dev; > + struct i2c_client *client; > +}; > + > +struct qwiic_ver { > + u8 major; > + u8 minor; > +}; > + > +struct qwiic_data { > + __be16 x; > + __be16 y; > + u8 thumb; > +} __packed; > + > +static void qwiic_poll(struct input_dev *input) > +{ > + struct qwiic_jsk *priv; > + struct qwiic_data data; > + int err; > + > + priv = input_get_drvdata(input); > + > + err = i2c_smbus_read_i2c_block_data(priv->client, QWIIC_JSK_REG_DATA, > + sizeof(data), (u8 *)&data); > + if (err != sizeof(data)) > + return; > + > + input_report_abs(input, ABS_X, be16_to_cpu(data.x) >> 6); > + input_report_abs(input, ABS_Y, be16_to_cpu(data.y) >> 6); > + input_report_key(input, BTN_THUMBL, !data.thumb); > + input_sync(input); > +} > + > +static int qwiic_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct qwiic_jsk *priv; > + struct qwiic_ver vers; > + int err; > + > + err = i2c_smbus_read_i2c_block_data(client, QWIIC_JSK_REG_VERS, > + sizeof(vers), (u8 *)&vers); > + if (err < 0) > + return err; > + if (err != sizeof(vers)) > + return -EIO; > + > + dev_dbg(&client->dev, "SparkFun Qwiic Joystick, FW: %u.%u\n", > + vers.major, vers.minor); > + > + priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + priv->client = client; > + snprintf(priv->phys, sizeof(priv->phys), > + "i2c/%s", dev_name(&client->dev)); > + i2c_set_clientdata(client, priv); > + > + priv->dev = devm_input_allocate_device(&client->dev); > + if (!priv->dev) > + return -ENOMEM; > + > + priv->dev->id.bustype = BUS_I2C; > + priv->dev->name = "SparkFun Qwiic Joystick"; > + priv->dev->phys = priv->phys; > + input_set_drvdata(priv->dev, priv); > + > + input_set_abs_params(priv->dev, ABS_X, 0, QWIIC_JSK_MAX_AXIS, > + QWIIC_JSK_FUZZ, QWIIC_JSK_FLAT); > + input_set_abs_params(priv->dev, ABS_Y, 0, QWIIC_JSK_MAX_AXIS, > + QWIIC_JSK_FUZZ, QWIIC_JSK_FLAT); > + input_set_capability(priv->dev, EV_KEY, BTN_THUMBL); > + > + err = input_setup_polling(priv->dev, qwiic_poll); > + if (err) { > + dev_err(&client->dev, "failed to set up polling: %d\n", err); > + return err; > + } > + input_set_poll_interval(priv->dev, QWIIC_JSK_POLL_INTERVAL); > + input_set_min_poll_interval(priv->dev, QWIIC_JSK_POLL_MIN); > + input_set_max_poll_interval(priv->dev, QWIIC_JSK_POLL_MAX); > + > + err = input_register_device(priv->dev); > + if (err) > + dev_err(&client->dev, "failed to register joystick: %d\n", err); > + > + return err; > +} > + > +#ifdef CONFIG_OF > +static const struct of_device_id of_qwiic_match[] = { > + { .compatible = "sparkfun,qwiic-joystick", }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, of_qwiic_match); > +#endif /* CONFIG_OF */ > + > +static const struct i2c_device_id qwiic_id_table[] = { > + { KBUILD_MODNAME, 0 }, > + { }, > +}; > +MODULE_DEVICE_TABLE(i2c, qwiic_id_table); > + > +static struct i2c_driver qwiic_driver = { > + .driver = { > + .name = DRV_NAME, > + .of_match_table = of_match_ptr(of_qwiic_match), > + }, > + .id_table = qwiic_id_table, > + .probe = qwiic_probe, > +}; > +module_i2c_driver(qwiic_driver); > + > +MODULE_AUTHOR("Oleh Kravchenko <oleg@xxxxxxxxxx>"); > +MODULE_DESCRIPTION("SparkFun Qwiic Joystick driver"); > +MODULE_LICENSE("GPL v2"); > -- > 2.26.3 > Other than that, Reviewed-by: Jeff LaBundy <jeff@xxxxxxxxxxx> Kind regards, Jeff LaBundy
