Re: [PATCH] ARM: dts: stm32: set stm32mp157c-odyssey DCMI pins

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Ahmad,

On Thu, Jun 03, 2021 at 04:26:59PM +0200, Ahmad Fatoum wrote:
> On 03.06.21 16:23, Grzegorz Szymaszek wrote:
> > The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output.
> > stm32mp15-pinctrl.dtsi contains one pin state definition for the DCMI
> > interface, dcmi-0, AKA phandle dcmi_pins_a. This definition is
> > incompatible with the pins used on the Odyssey board, where:
> > - there are 8 data pins instead of 12,
> > - […]
> > 
> > Override the dcmi_pins_a definition (as well as dcmi_sleep_pins_a) in
> > the Odyssey device tree.
> 
> Rather define a new pinctrl group (e.g. &dcmi_pins_b) and use that
> instead of overriding an existing one.

Can I simply use dcmi_pins_b (as the first unused identifier) or is
there some way to match specific pin groups to an identifier (b, c, d,
and so on)?

> Current convention is also to place all STM32MP1 pinctrl nodes into
> a central file, not in the individual board device trees.

Sure, I will update the patch.

Thanks for your comments!

-- 
Grzegorz



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux