On Fri, 28 May 2021 17:45:20 -0400, Sean Anderson wrote: > This adds a binding for the Xilinx LogiCORE IP AXI Timer. This device is > a "soft" block, so it has many parameters which would not be > configurable in most hardware. This binding is usually automatically > generated by Xilinx's tools, so the names and values of some properties > must be kept as they are. Replacement properties have been provided for > new device trees. > > Because we need to init timer devices so early in boot, the easiest way > to configure things is to use a device tree property. For the moment > this is 'xlnx,pwm', but this could be extended/renamed/etc. in the > future if these is a need for a generic property. > > Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx> > --- > > Changes in v4: > - Remove references to generate polarity so this can get merged > - Predicate PWM driver on the presence of #pwm-cells > - Make some properties optional for clocksource drivers > > Changes in v3: > - Mark all boolean-as-int properties as deprecated > - Add xlnx,pwm and xlnx,gen?-active-low properties. > - Make newer replacement properties mutually-exclusive with what they > replace > - Add an example with non-deprecated properties only. > > Changes in v2: > - Use 32-bit addresses for example binding > > .../bindings/pwm/xlnx,axi-timer.yaml | 85 +++++++++++++++++++ > 1 file changed, 85 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml:16:10: [warning] wrong indentation: expected 10 but found 9 (indentation) ./Documentation/devicetree/bindings/pwm/xlnx,axi-timer.yaml:19:10: [warning] wrong indentation: expected 10 but found 9 (indentation) dtschema/dtc warnings/errors: See https://patchwork.ozlabs.org/patch/1485318 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
