A simple analog joystick built on Low Power ATtiny85 Microcontroller. Directional movements are measured with two 10 kΩ potentiometers connected with a gimbal mechanism that separates the horizontal and vertical movements. This joystick also has a select button that is actuated when the joystick is pressed down. Input events polled over the I2C bus. Product page: https://www.sparkfun.com/products/15168 Firmware and hardware sources: https://github.com/sparkfun/Qwiic_Joystick Tested on RPi4B and O4-iMX-NANO boards. Cc: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx> Cc: Device Tree mailing list <devicetree@xxxxxxxxxxxxxxx> Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> Cc: Jiri Kosina <jikos@xxxxxxxx> Cc: Patchwork Bot <patchwork-bot@xxxxxxxxxx> Signed-off-by: Oleh Kravchenko <oleg@xxxxxxxxxx> --- .../bindings/input/qwiic-joystick.yaml | 31 ++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/input/joystick/Kconfig | 9 + drivers/input/joystick/Makefile | 1 + drivers/input/joystick/qwiic-joystick.c | 169 ++++++++++++++++++ 5 files changed, 212 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/qwiic-joystick.yaml create mode 100644 drivers/input/joystick/qwiic-joystick.c diff --git a/Documentation/devicetree/bindings/input/qwiic-joystick.yaml b/Documentation/devicetree/bindings/input/qwiic-joystick.yaml new file mode 100644 index 000000000000..51cadeb350f2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/qwiic-joystick.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2021 Oleh Kravchenko +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/input/qwiic-joystick.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: SparkFun Qwiic Joystick + +maintainers: + - Oleh Kravchenko <oleg@xxxxxxxxxx> + +description: | + Bindings for SparkFun Qwiic Joystick (COM-15168). + https://www.sparkfun.com/products/15168 + +properties: + compatible: + const: sparkfun,qwiic-joystick + +required: + - compatible + +additionalProperties: false + +examples: + - | + qwiic@20 { + compatible = "sparkfun,qwiic-joystick"; + reg = <0x20>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 944b02bb96d7..a5631e68f5d1 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1060,6 +1060,8 @@ patternProperties: description: Sony Corporation "^spansion,.*": description: Spansion Inc. + "^sparkfun,.*": + description: SparkFun Electronics "^sprd,.*": description: Spreadtrum Communications Inc. "^sst,.*": diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index 5e38899058c1..7dfe8ea90923 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -372,6 +372,15 @@ config JOYSTICK_PXRC To compile this driver as a module, choose M here: the module will be called pxrc. +config JOYSTICK_QWIIC + tristate "SparkFun Qwiic Joystick" + depends on I2C + help + Say Y here if you want to use the SparkFun Qwiic Joystick. + + To compile this driver as a module, choose M here: the + module will be called qwiic-joystick. + config JOYSTICK_FSIA6B tristate "FlySky FS-iA6B RC Receiver" select SERIO diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index 31d720c9e493..5174b8aba2dd 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_JOYSTICK_MAPLE) += maplecontrol.o obj-$(CONFIG_JOYSTICK_N64) += n64joy.o obj-$(CONFIG_JOYSTICK_PSXPAD_SPI) += psxpad-spi.o obj-$(CONFIG_JOYSTICK_PXRC) += pxrc.o +obj-$(CONFIG_JOYSTICK_QWIIC) += qwiic-joystick.o obj-$(CONFIG_JOYSTICK_SIDEWINDER) += sidewinder.o obj-$(CONFIG_JOYSTICK_SPACEBALL) += spaceball.o obj-$(CONFIG_JOYSTICK_SPACEORB) += spaceorb.o diff --git a/drivers/input/joystick/qwiic-joystick.c b/drivers/input/joystick/qwiic-joystick.c new file mode 100644 index 000000000000..9b7ab0dd1218 --- /dev/null +++ b/drivers/input/joystick/qwiic-joystick.c @@ -0,0 +1,169 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) 2021 Oleh Kravchenko <oleg@xxxxxxxxxx> + +/* + * SparkFun Qwiic Joystick + * Product page:https://www.sparkfun.com/products/15168 + * Firmware and hardware sources:https://github.com/sparkfun/Qwiic_Joystick + */ + +#include <linux/bits.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/module.h> + +#define QWIIC_JSK_REG_VERS 0 +#define QWIIC_JSK_REG_DATA 3 + +#define QWIIC_JSK_MAX_AXIS GENMASK(10, 0) +#define QWIIC_JSK_FUZZ 2 +#define QWIIC_JSK_FLAT 2 + +struct qwiic_jsk { + char phys[32]; + struct input_dev *dev; + struct i2c_client *i2c; +}; + +struct qwiic_ver { + u8 addr; + u8 major; + u8 minor; +} __packed; + +struct qwiic_data { + u8 hx; + u8 lx; + u8 hy; + u8 ly; + u8 thumb; +} __packed; + +static void qwiic_poll(struct input_dev *input) +{ + struct qwiic_jsk *priv; + struct qwiic_data data; + int ret; + int x, y, btn; + + priv = input_get_drvdata(input); + + ret = i2c_smbus_read_i2c_block_data(priv->i2c, QWIIC_JSK_REG_DATA, + sizeof(data), (u8 *)&data); + if (ret == sizeof(data)) { + x = (data.hx << 8 | data.lx) >> 6; + y = (data.hy << 8 | data.ly) >> 6; + btn = !!!data.thumb; + + input_report_abs(input, ABS_X, x); + input_report_abs(input, ABS_Y, y); + input_report_key(input, BTN_THUMBL, btn); + + input_sync(input); + } +} + +static int qwiic_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + struct qwiic_jsk *priv; + struct qwiic_ver vers; + int ret; + + ret = i2c_smbus_read_i2c_block_data(i2c, QWIIC_JSK_REG_VERS, + sizeof(vers), (u8 *)&vers); + if (ret != sizeof(vers)) { + ret = -EIO; + goto err; + } + + if (i2c->addr != vers.addr) { + dev_err(&i2c->dev, "address doesn't match!\n"); + ret = -ENODEV; + goto err; + } + + dev_info(&i2c->dev, "SparkFun Qwiic Joystick, FW: %d.%d\n", + vers.major, vers.minor); + + priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + ret = -ENOMEM; + goto err; + } + + priv->i2c = i2c; + snprintf(priv->phys, sizeof(priv->phys), "i2c/%s", dev_name(&i2c->dev)); + i2c_set_clientdata(i2c, priv); + + priv->dev = devm_input_allocate_device(&i2c->dev); + if (!priv->dev) { + dev_err(&i2c->dev, "failed to allocate input device\n"); + ret = -ENOMEM; + goto err; + } + + priv->dev->dev.parent = &i2c->dev; + priv->dev->id.bustype = BUS_I2C; + priv->dev->name = "SparkFun Qwiic Joystick"; + priv->dev->phys = priv->phys; + input_set_drvdata(priv->dev, priv); + + input_set_abs_params(priv->dev, ABS_X, 0, QWIIC_JSK_MAX_AXIS, + QWIIC_JSK_FUZZ, QWIIC_JSK_FLAT); + input_set_abs_params(priv->dev, ABS_Y, 0, QWIIC_JSK_MAX_AXIS, + QWIIC_JSK_FUZZ, QWIIC_JSK_FLAT); + input_set_capability(priv->dev, EV_KEY, BTN_THUMBL); + + ret = input_setup_polling(priv->dev, qwiic_poll); + if (ret) { + dev_err(&i2c->dev, "failed to set up polling: %d\n", ret); + goto err; + } + input_set_poll_interval(priv->dev, 16); + input_set_min_poll_interval(priv->dev, 8); + input_set_max_poll_interval(priv->dev, 32); + + ret = input_register_device(priv->dev); + if (ret) + dev_err(&i2c->dev, "failed to register joystick: %d\n", ret); + +err: + return ret; +} + +static int qwiic_remove(struct i2c_client *i2c) +{ + struct qwiic_jsk *priv; + + priv = i2c_get_clientdata(i2c); + input_unregister_device(priv->dev); + + return 0; +} + +static const struct of_device_id of_qwiic_match[] = { + { .compatible = "sparkfun,qwiic-joystick", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_qwiic_match); + +static const struct i2c_device_id qwiic_id_table[] = { + { KBUILD_MODNAME, 0 }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, qwiic_id_table); + +static struct i2c_driver qwiic_driver = { + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = of_match_ptr(of_qwiic_match), + }, + .id_table = qwiic_id_table, + .probe = qwiic_probe, + .remove = qwiic_remove, +}; +module_i2c_driver(qwiic_driver); + +MODULE_AUTHOR("Oleh Kravchenko <oleg@xxxxxxxxxx>"); +MODULE_DESCRIPTION("SparkFun Qwiic Joystick driver"); +MODULE_LICENSE("GPL v2"); -- 2.26.3
