Re: [PATCH 05/10] media: hantro: add support for Rockchip RK3036

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Donnerstag, 27. Mai 2021, 01:27:59 CEST schrieb Alex Bee:
> Hi Ezequiel,
> 
> Am 26.05.21 um 12:28 schrieb Ezequiel Garcia:
> > Hi Alex,
> >
> > Thanks a lot for the patch.
> >
> > On Tue, 2021-05-25 at 17:22 +0200, Alex Bee wrote:
> >> RK3036's VPU IP block is the same as RK3288 has, except that it doesn't
> >> have an encoder, decoding is supported up to 1920x1088 only and the axi
> >> clock can be set to 300 MHz max.
> >>
> >> Add a new RK3036 variant which reflect this differences.
> >>
> >> Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
> >> ---
> >>   drivers/staging/media/hantro/hantro_drv.c    |  1 +
> >>   drivers/staging/media/hantro/hantro_hw.h     |  1 +
> >>   drivers/staging/media/hantro/rk3288_vpu_hw.c | 49 ++++++++++++++++++++
> >>   3 files changed, 51 insertions(+)
> >>
> >> diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
> >> index 38ea7b24036e..4f3c08e85bb8 100644
> >> --- a/drivers/staging/media/hantro/hantro_drv.c
> >> +++ b/drivers/staging/media/hantro/hantro_drv.c
> >> @@ -490,6 +490,7 @@ static const struct of_device_id of_hantro_match[] = {
> >>          { .compatible = "rockchip,rk3328-vpu", .data = &rk3328_vpu_variant, },
> >>          { .compatible = "rockchip,rk3288-vpu", .data = &rk3288_vpu_variant, },
> >>          { .compatible = "rockchip,rk3066-vpu", .data = &rk3066_vpu_variant, },
> >> +       { .compatible = "rockchip,rk3036-vpu", .data = &rk3036_vpu_variant, },
> >>   #endif
> >>   #ifdef CONFIG_VIDEO_HANTRO_IMX8M
> >>          { .compatible = "nxp,imx8mq-vpu", .data = &imx8mq_vpu_variant, },
> >> diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
> >> index de2bc367a15a..d8d6b0d3c3b3 100644
> >> --- a/drivers/staging/media/hantro/hantro_hw.h
> >> +++ b/drivers/staging/media/hantro/hantro_hw.h
> >> @@ -164,6 +164,7 @@ extern const struct hantro_variant rk3399_vpu_variant;
> >>   extern const struct hantro_variant rk3328_vpu_variant;
> >>   extern const struct hantro_variant rk3288_vpu_variant;
> >>   extern const struct hantro_variant rk3066_vpu_variant;
> >> +extern const struct hantro_variant rk3036_vpu_variant;
> >>   extern const struct hantro_variant imx8mq_vpu_variant;
> >>   extern const struct hantro_variant sama5d4_vdec_variant;
> >>   
> >> diff --git a/drivers/staging/media/hantro/rk3288_vpu_hw.c b/drivers/staging/media/hantro/rk3288_vpu_hw.c
> >> index 29805c4bd92f..c4684df4e012 100644
> >> --- a/drivers/staging/media/hantro/rk3288_vpu_hw.c
> >> +++ b/drivers/staging/media/hantro/rk3288_vpu_hw.c
> >> @@ -174,6 +174,13 @@ static irqreturn_t rk3288_vepu_irq(int irq, void *dev_id)
> >>          return IRQ_HANDLED;
> >>   }
> >>   
> >> +static int rk3036_vpu_hw_init(struct hantro_dev *vpu)
> >> +{
> >> +       /* Bump ACLKs to max. possible freq. to improve performance. */
> >> +       clk_set_rate(vpu->clocks[0].clk, RK3066_ACLK_MAX_FREQ);
> >> +       return 0;
> >> +}
> >> +
> >>   static int rk3066_vpu_hw_init(struct hantro_dev *vpu)
> >>   {
> >>          /* Bump ACLKs to max. possible freq. to improve performance. */
> >> @@ -209,6 +216,27 @@ static void rk3288_vpu_enc_reset(struct hantro_ctx *ctx)
> >>   /*
> >>    * Supported codec ops.
> >>    */
> >> +static const struct hantro_codec_ops rk3036_vpu_codec_ops[] = {
> >> +       [HANTRO_MODE_H264_DEC] = {
> >> +               .run = hantro_g1_h264_dec_run,
> >> +               .reset = hantro_g1_reset,
> >> +               .init = hantro_h264_dec_init,
> >> +               .exit = hantro_h264_dec_exit,
> >> +       },
> >> +       [HANTRO_MODE_MPEG2_DEC] = {
> >> +               .run = hantro_g1_mpeg2_dec_run,
> >> +               .reset = hantro_g1_reset,
> >> +               .init = hantro_mpeg2_dec_init,
> >> +               .exit = hantro_mpeg2_dec_exit,
> >> +       },
> >> +       [HANTRO_MODE_VP8_DEC] = {
> >> +               .run = hantro_g1_vp8_dec_run,
> >> +               .reset = hantro_g1_reset,
> >> +               .init = hantro_vp8_dec_init,
> >> +               .exit = hantro_vp8_dec_exit,
> >> +       },
> >> +};
> >> +
> >>   static const struct hantro_codec_ops rk3066_vpu_codec_ops[] = {
> >>          [HANTRO_MODE_JPEG_ENC] = {
> >>                  .run = hantro_h1_jpeg_enc_run,
> >> @@ -269,6 +297,10 @@ static const struct hantro_codec_ops rk3288_vpu_codec_ops[] = {
> >>    * VPU variant.
> >>    */
> >>   
> >> +static const struct hantro_irq rk3036_irqs[] = {
> >> +       { "vdpu", hantro_g1_irq },
> >> +};
> >> +
> >>   static const struct hantro_irq rk3288_irqs[] = {
> >>          { "vepu", rk3288_vepu_irq },
> >>          { "vdpu", hantro_g1_irq },
> >> @@ -283,6 +315,23 @@ static const char * const rk3288_clk_names[] = {
> >>          "aclk", "hclk"
> >>   };
> >>   
> >> +const struct hantro_variant rk3036_vpu_variant = {
> >> +       .dec_offset = 0x400,
> > If it doesn't have an encoder, then you should just
> > use dec_offset = 0x0.
> >
> > Thanks,
> > Ezequiel
> >
> That would mean, I'd have to adapt the register offset in the device 
> tree - I'd prefer to keep it in line with the TRM. Unless you insist, 
> I'd like to keep it this way (It's , btw, the very same for RK3328).

I'd agree with Alex ... ideally the devicetree should match the block
register area from the TRM not some internal offset.
[DT describes hardware etc etc ;-) ]

Heiko





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux