Re: [PATCH 1/3] ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

Thank you for the patch.

On Fri, May 21, 2021 at 09:54:06AM +0200, Geert Uytterhoeven wrote:
> The dt-schema for nxp,pcf8575 expects GPIO hogs node names to end with a
> 'hog' suffix.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
>  arch/arm/boot/dts/dra7-evm.dts          | 2 +-
>  arch/arm/boot/dts/dra71-evm.dts         | 2 +-
>  arch/arm/boot/dts/dra72-evm-common.dtsi | 2 +-
>  arch/arm/boot/dts/dra76-evm.dts         | 2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 38530dbb89a00b7c..3dcb6e1f49bcf1f0 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -366,7 +366,7 @@ pcf_hdmi: gpio@26 {
>  		reg = <0x26>;
>  		gpio-controller;
>  		#gpio-cells = <2>;
> -		p1 {
> +		hdmi-audio-hog {
>  			/* vin6_sel_s0: high: VIN6, low: audio */
>  			gpio-hog;
>  			gpios = <1 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
> index 6d2cca6b44883e59..a64364443031525b 100644
> --- a/arch/arm/boot/dts/dra71-evm.dts
> +++ b/arch/arm/boot/dts/dra71-evm.dts
> @@ -187,7 +187,7 @@ &pcf_gpio_21 {
>  };
>  
>  &pcf_hdmi {
> -	p0 {
> +	hdmi-i2c-disable-hog {
>  		/*
>  		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
>  		 * With this PM_SEL(p3) should not matter
> diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
> index b65b2dd094d0ff57..f2384277d5dcdc5c 100644
> --- a/arch/arm/boot/dts/dra72-evm-common.dtsi
> +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
> @@ -268,7 +268,7 @@ pcf_hdmi: pcf8575@26 {
>  		 */
>  		lines-initial-states = <0x0f2b>;
>  
> -		p1 {
> +		hdmi-audio-hog {
>  			/* vin6_sel_s0: high: VIN6, low: audio */
>  			gpio-hog;
>  			gpios = <1 GPIO_ACTIVE_HIGH>;
> diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
> index 9bd01ae40b1d1fbb..df47ea59c9c404c2 100644
> --- a/arch/arm/boot/dts/dra76-evm.dts
> +++ b/arch/arm/boot/dts/dra76-evm.dts
> @@ -381,7 +381,7 @@ pcf_hdmi: pcf8575@26 {
>  		reg = <0x26>;
>  		gpio-controller;
>  		#gpio-cells = <2>;
> -		p1 {
> +		hdmi-audio-hog {
>  			/* vin6_sel_s0: high: VIN6, low: audio */
>  			gpio-hog;
>  			gpios = <1 GPIO_ACTIVE_HIGH>;

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux