On Wed, May 19, 2021 at 03:14:47PM +0800, Li Jun wrote: > Typec orientation switch can be implementaed as a consumer of mux > controller, with this way, mux-control-name must be provided with > name "typec-orientation-switch", along with its 3 states value array > for none(high impedance), cc1, cc2. > > Signed-off-by: Li Jun <jun.li@xxxxxxx> > --- > .../bindings/connector/usb-connector.yaml | 21 +++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml > index 32509b98142e..567183e199a3 100644 > --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml > +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml > @@ -111,6 +111,24 @@ properties: > - 1.5A > - 3.0A > > + mux-controls: > + description: > + mux controller node to use for orientation switch selection. > + maxItems: 1 > + > + mux-control-name: > + items: > + - const: typec-orientation-switch Don't really need a name with only 1 entry. > + > + mux-control-switch-states: Not really part of the 'mux-control' binding, but part of the connector. So 'typec-orientation-switch-states' or something. > + description: | > + An ordered u32 array describing the mux state value for each typec > + orientations: NONE(high impedance), CC1, CC2, if there is no HW mux > + state for NONE, use value of CC1 or CC2 for it, > + minItems: 3 > + maxItems: 3 > + $ref: /schemas/types.yaml#/definitions/uint32-array > + > # The following are optional properties for "usb-c-connector" with power > # delivery support. > source-pdos: > @@ -301,6 +319,9 @@ examples: > sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) > PDO_VAR(5000, 12000, 2000)>; > op-sink-microwatt = <10000000>; > + mux-controls = <&mux>; > + mux-control-names = "typec-orientation-switch"; > + mux-control-switch-states = <2>, <0>, <1>; > }; > }; > > -- > 2.25.1 >
