Re: [PATCH v1 3/7] dt-bindings: devfreq: tegra30-actmon: Convert to schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 5/11/21 6:10 AM, Dmitry Osipenko wrote:
> Convert NVIDIA Tegra ACTMON binding to schema.
> 
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
> ---
>  .../arm/tegra/nvidia,tegra30-actmon.txt       |  57 ---------
>  .../devfreq/nvidia,tegra30-actmon.yaml        | 121 ++++++++++++++++++
>  2 files changed, 121 insertions(+), 57 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
>  create mode 100644 Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
> 
> diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
> deleted file mode 100644
> index 897eedfa2bc8..000000000000
> --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-actmon.txt
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -NVIDIA Tegra Activity Monitor
> -
> -The activity monitor block collects statistics about the behaviour of other
> -components in the system. This information can be used to derive the rate at
> -which the external memory needs to be clocked in order to serve all requests
> -from the monitored clients.
> -
> -Required properties:
> -- compatible: should be "nvidia,tegra<chip>-actmon"
> -- reg: offset and length of the register set for the device
> -- interrupts: standard interrupt property
> -- clocks: Must contain a phandle and clock specifier pair for each entry in
> -clock-names. See ../../clock/clock-bindings.txt for details.
> -- clock-names: Must include the following entries:
> -  - actmon
> -  - emc
> -- resets: Must contain an entry for each entry in reset-names. See
> -../../reset/reset.txt for details.
> -- reset-names: Must include the following entries:
> -  - actmon
> -- operating-points-v2: See ../bindings/opp/opp.txt for details.
> -- interconnects: Should contain entries for memory clients sitting on
> -                 MC->EMC memory interconnect path.
> -- interconnect-names: Should include name of the interconnect path for each
> -                      interconnect entry. Consult TRM documentation for
> -                      information about available memory clients, see MEMORY
> -                      CONTROLLER section.
> -
> -For each opp entry in 'operating-points-v2' table:
> -- opp-supported-hw: bitfield indicating SoC speedo ID mask
> -- opp-peak-kBps: peak bandwidth of the memory channel
> -
> -Example:
> -	dfs_opp_table: opp-table {
> -		compatible = "operating-points-v2";
> -
> -		opp@12750000 {
> -			opp-hz = /bits/ 64 <12750000>;
> -			opp-supported-hw = <0x000F>;
> -			opp-peak-kBps = <51000>;
> -		};
> -		...
> -	};
> -
> -	actmon@6000c800 {
> -		compatible = "nvidia,tegra124-actmon";
> -		reg = <0x0 0x6000c800 0x0 0x400>;
> -		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> -		clocks = <&tegra_car TEGRA124_CLK_ACTMON>,
> -			 <&tegra_car TEGRA124_CLK_EMC>;
> -		clock-names = "actmon", "emc";
> -		resets = <&tegra_car 119>;
> -		reset-names = "actmon";
> -		operating-points-v2 = <&dfs_opp_table>;
> -		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
> -		interconnect-names = "cpu";
> -	};
> diff --git a/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
> new file mode 100644
> index 000000000000..2a940d5d7ab4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/nvidia,tegra30-actmon.yaml
> @@ -0,0 +1,121 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: https://protect2.fireeye.com/v1/url?k=45c89d0a-1a53a410-45c91645-000babff24ad-23dabc3fb0c14687&q=1&e=3278a7b6-8f85-494f-a1fa-d926c45f4529&u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdevfreq%2Fnvidia%2Ctegra30-actmon.yaml%23
> +$schema: https://protect2.fireeye.com/v1/url?k=f9f2037e-a6693a64-f9f38831-000babff24ad-e0e7e870e2aea6e2&q=1&e=3278a7b6-8f85-494f-a1fa-d926c45f4529&u=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23
> +
> +title: NVIDIA Tegra30 Activity Monitor
> +
> +maintainers:
> +  - Dmitry Osipenko <digetx@xxxxxxxxx>
> +  - Jon Hunter <jonathanh@xxxxxxxxxx>
> +  - Thierry Reding <thierry.reding@xxxxxxxxx>
> +
> +description: |
> +  The activity monitor block collects statistics about the behaviour of other
> +  components in the system. This information can be used to derive the rate at
> +  which the external memory needs to be clocked in order to serve all requests
> +  from the monitored clients.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nvidia,tegra30-actmon
> +      - nvidia,tegra114-actmon
> +      - nvidia,tegra124-actmon
> +      - nvidia,tegra210-actmon
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: actmon
> +      - const: emc
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    items:
> +      - const: actmon
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interconnects:
> +    minItems: 1
> +    maxItems: 12
> +
> +  interconnect-names:
> +    minItems: 1
> +    maxItems: 12
> +    description:
> +      Should include name of the interconnect path for each interconnect
> +      entry. Consult TRM documentation for information about available
> +      memory clients, see ACTIVITY MONITOR section.
> +
> +  operating-points-v2:
> +    description:
> +      Should contain freqs and voltages and opp-supported-hw property, which
> +      is a bitfield indicating SoC speedo ID mask.
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - interrupts
> +  - interconnects
> +  - interconnect-names
> +  - operating-points-v2
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/memory/tegra30-mc.h>
> +
> +    mc: memory-controller@7000f000 {
> +        compatible = "nvidia,tegra30-mc";
> +        reg = <0x7000f000 0x400>;
> +        clocks = <&clk 32>;
> +        clock-names = "mc";
> +
> +        interrupts = <0 77 4>;
> +
> +        #iommu-cells = <1>;
> +        #reset-cells = <1>;
> +        #interconnect-cells = <1>;
> +    };
> +
> +    emc: external-memory-controller@7000f400 {
> +        compatible = "nvidia,tegra30-emc";
> +        reg = <0x7000f400 0x400>;
> +        interrupts = <0 78 4>;
> +        clocks = <&clk 57>;
> +
> +        nvidia,memory-controller = <&mc>;
> +        operating-points-v2 = <&dvfs_opp_table>;
> +        power-domains = <&domain>;
> +
> +        #interconnect-cells = <0>;
> +    };
> +
> +    actmon@6000c800 {
> +        compatible = "nvidia,tegra30-actmon";
> +        reg = <0x6000c800 0x400>;
> +        interrupts = <0 45 4>;
> +        clocks = <&clk 119>, <&clk 57>;
> +        clock-names = "actmon", "emc";
> +        resets = <&rst 119>;
> +        reset-names = "actmon";
> +        operating-points-v2 = <&dvfs_opp_table>;
> +        interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
> +        interconnect-names = "cpu-read";
> +    };
> 

Acked-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>

After tegra SoC maintainer review this patch, I'll take it.

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux