On Wed, May 12, 2021 at 04:43:08PM +0530, satya priya wrote: > Convert Qualcomm PMIC GPIO bindings from .txt to .yaml format. > > Signed-off-by: satya priya <skakit@xxxxxxxxxxxxxx> > --- > Changes in V3: > - As per Rob's comments fixed bot erros. > - Moved this patch to end of the series so that other patches are not > blocked on this. > > Changes in V4: > - As per Rob's comments, added maxItems for reg and interrupts. > Added reference of "pinmux-node.yaml" and "pincfg-node.yaml". > Made 'additionalProperties' as false. > > .../devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 288 --------------------- > .../bindings/pinctrl/qcom,pmic-gpio.yaml | 245 ++++++++++++++++++ > 2 files changed, 245 insertions(+), 288 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml > new file mode 100644 > index 0000000..85381a0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml > @@ -0,0 +1,245 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm PMIC GPIO block > + > +maintainers: > + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx> > + > +description: | > + This binding describes the GPIO block(s) found in the 8xxx series of > + PMIC's from Qualcomm. > + > +properties: > + compatible: > + items: > + - enum: > + - qcom,pm8005-gpio > + - qcom,pm8018-gpio > + - qcom,pm8038-gpio > + - qcom,pm8058-gpio > + - qcom,pm8916-gpio > + - qcom,pm8917-gpio > + - qcom,pm8921-gpio > + - qcom,pm8941-gpio > + - qcom,pm8950-gpio > + - qcom,pm8994-gpio > + - qcom,pm8998-gpio > + - qcom,pma8084-gpio > + - qcom,pmi8950-gpio > + - qcom,pmi8994-gpio > + - qcom,pmi8998-gpio > + - qcom,pms405-gpio > + - qcom,pm660-gpio > + - qcom,pm660l-gpio > + - qcom,pm8150-gpio > + - qcom,pm8150b-gpio > + - qcom,pm6150-gpio > + - qcom,pm6150l-gpio > + - qcom,pmx55-gpio > + - qcom,pm7325-gpio > + - qcom,pm8350c-gpio > + - qcom,pmk8350-gpio > + - qcom,pmr735a-gpio > + > + - enum: > + - qcom,spmi-gpio > + - qcom,ssbi-gpio > + > + reg: > + maxItems: 1 > + > + interrupts: > + minItems: 1 > + maxItems: 44 Please say something about what the 1-44 interrupts are if you can't define each one. > + > + '#interrupt-cells': > + const: 2 > + > + interrupt-controller: true > + > + gpio-controller: true > + > + gpio-ranges: > + maxItems: 1 > + > + '#gpio-cells': > + const: 2 > + description: | > + The first cell will be used to define gpio number and the > + second denotes the flags for this gpio > + > + gpio-keys: > + type: object > + properties: > + volume-keys: > + type: object > + anyOf: > + - $ref: "pinmux-node.yaml" > + - $ref: "pincfg-node.yaml" > + properties: > + pins: > + description: | > + List of gpio pins affected by the properties specified in > + this subnode. Valid pins are > + - gpio1-gpio4 for pm8005 > + - gpio1-gpio6 for pm8018 > + - gpio1-gpio12 for pm8038 > + - gpio1-gpio40 for pm8058 > + - gpio1-gpio4 for pm8916 > + - gpio1-gpio38 for pm8917 > + - gpio1-gpio44 for pm8921 > + - gpio1-gpio36 for pm8941 > + - gpio1-gpio8 for pm8950 (hole on gpio3) > + - gpio1-gpio22 for pm8994 > + - gpio1-gpio26 for pm8998 > + - gpio1-gpio22 for pma8084 > + - gpio1-gpio2 for pmi8950 > + - gpio1-gpio10 for pmi8994 > + - gpio1-gpio12 for pms405 (holes on gpio1, gpio9 > + and gpio10) > + - gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, > + gpio7 and gpio8) > + - gpio1-gpio12 for pm8150b (holes on gpio3, gpio4 > + and gpio7) > + - gpio1-gpio12 for pm8150l (hole on gpio7) > + - gpio1-gpio10 for pm6150 > + - gpio1-gpio12 for pm6150l > + - gpio1-gpio10 for pm7325 > + - gpio1-gpio9 for pm8350c > + - gpio1-gpio4 for pmk8350 > + - gpio1-gpio4 for pmr735a > + > + items: > + pattern: "^gpio([0-9]+)$" > + > + function: > + description: | > + Specify the alternative function to be configured for the > + specified pins. No need to redescribe a common property. > + items: > + - enum: > + - normal > + - paired > + - func1 > + - func2 > + - dtest1 > + - dtest2 > + - dtest3 > + - dtest4 > + - func3 # supported by LV/MV GPIO subtypes > + - func4 # supported by LV/MV GPIO subtypes > + > + bias-disable: true > + > + bias-pull-down: true > + > + bias-pull-up: true > + > + qcom,pull-up-strength: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Specifies the strength to use for pull up, if selected. > + Valid values are defined in > + <dt-bindings/pinctrl/qcom,pmic-gpio.h> > + If this property is omitted 30uA strength will be used > + if pull up is selected > + > + bias-high-impedance: true > + > + input-enable: true > + > + output-high: true > + > + output-low: true > + > + power-source: true > + > + qcom,drive-strength: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Selects the drive strength for the specified pins > + Valid drive strength values are defined in > + <dt-bindings/pinctrl/qcom,pmic-gpio.h> Please define the constraints here. > + > + drive-push-pull: true > + > + drive-open-drain: true > + > + drive-open-source: true > + > + qcom,analog-pass: > + $ref: /schemas/types.yaml#/definitions/flag > + description: | > + The specified pins are configured in > + analog-pass-through mode. > + > + qcom,atest: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Selects ATEST rail to route to GPIO when it's > + configured in analog-pass-through mode. > + enum: [1 2 3 4] enum: [ 1, 2, 3, 4 ] > + > + qcom,dtest-buffer: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: | > + Selects DTEST rail to route to GPIO when it's > + configured as digital input. > + enum: [1 2 3 4] Ditto. > + > + required: > + - pins > + - function > + > + additionalProperties: false > + > +additionalProperties: false > + > +required: > + - compatible > + - reg > + > +examples: > + - | > + #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> > + > + pm8921_gpio: gpio@150 { > + compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio"; > + reg = <0x150 0x160>; > + interrupts = <192 1>, <193 1>, <194 1>, > + <195 1>, <196 1>, <197 1>, > + <198 1>, <199 1>, <200 1>, > + <201 1>, <202 1>, <203 1>, > + <204 1>, <205 1>, <206 1>, > + <207 1>, <208 1>, <209 1>, > + <210 1>, <211 1>, <212 1>, > + <213 1>, <214 1>, <215 1>, > + <216 1>, <217 1>, <218 1>, > + <219 1>, <220 1>, <221 1>, > + <222 1>, <223 1>, <224 1>, > + <225 1>, <226 1>, <227 1>, > + <228 1>, <229 1>, <230 1>, > + <231 1>, <232 1>, <233 1>, > + <234 1>, <235 1>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + pm8921_gpio_keys: gpio-keys { > + volume-keys { > + pins = "gpio20", "gpio21"; > + function = "normal"; > + > + input-enable; > + bias-pull-up; > + drive-push-pull; > + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; > + power-source = <PM8921_GPIO_S4>; > + }; > + }; > + }; > +... > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
